Professional Documents
Culture Documents
Meco HB
Meco HB
SHAFT SEALS
216 Bay Point Road, Georgetown ME 04548 USA +1 207 371 2210 Fax: +1 207 371 2169 Toll-free in North America: 1 800 526 8800 www.woodex-meco.com email: sales@mecoseal.com 2009 Woodex Bearing Company, Inc. All rights reserved
SHAFT SEALS
What sizes are available? The HB model seal is stocked in 5 standard inch and 11 metric sizes. These 16 seals can be easily converted for other shaft sizes and all fit within the five stocked housing (HSG) sizes. This allows the HB model seals to be sized for shaft diameters 4.07 (103mm) and smaller. See the Stocked HSG# Chart on Page 3 for maximum shaft size for each of the five housings. What construction is available? The HB seals rugged housing options are designed for long life. You may choose from three stock housing materials: FDA Nylon, Anodized Aluminum or 316L SS.
3 HBZ4W4A300 seal, mounted on a horizontal gypsum feeder Two elastomer materials, Viton or FDA white silicone, ensure compatibility with nearly all applications. The standard stators are type 304 stainless steel. The standard rotors are MECO3000, a high-performance, bearing grade, polymerfilled PTFE with FDA approval. No abrasive filler material is added to MECO3000. Any of the components may be individually replaced. Unsplit rebuild kits consisting of replacement rotors and drive elastomer are maintained in-stock for immediate shipment. In cases where it is difficult to remove the bearing or drive, convenient, fully-split rebuild kits are available. Since Woodexs MECO Seal division manufactures many custom shaft seals, we have the capability to fabricate from any material when required. See Sizing Chart on next page for dimensional information.
Inset: 2 HB seal installed on vertical sugar screw. Seal installed in highlighted area of main photo. Woodex Bearing Company, Inc., 216 Bay Point Road, Georgetown ME 04548 USA +1 207 371 2210 Fax: +1 207 371 2169 Toll-free in North America: 1 800 526 8800 www.woodex-meco.com email: sales@mecoseal.com 2009 Woodex Bearing Company, Inc. All rights reserved
Stocked HSG#
Each MECO HB Seal housing can accommodate optional shafts up to these limits:
HSG # 1 2 3 4
C
1/4 NPT INSPECTION PORT 1.63 (41mm)
SQ P C.E.M.A. Standard Sizes (Inches) CEMA Part # A shaft HBZ1W4A150 1.50 HBZ2W4A200 2.00 HBZ3W4A244 2.44 HBZ4W4A300 3.00 HBZ5W4A344 3.44 Metric Part # A shaft HBZ1W4A157 40 HBZ1W4A177 45 HBZ2W4A197 50 HBZ2W4A217 55 HBZ3W4A236 60 HBZ3W4A256 65 HBZ4W4A276 70 HBZ4W4A295 75 HBZ4W4A315 80 HBZ5W4A335 85 HBZ5W4A354 90 P 5.38 6.50 7.38 7.75 9.25 P 137 137 165 165 187 187 197 197 197 235 235 HSG # 1 2 3 4 5 HSG # 1 1 2 2 3 3 4 4 4 5 5 SQ MIN 4.00 4.38 5.13 5.75 6.75 SQ MIN 102 102 111 111 130 130 146 146 146 171 171
SQ MAX 4.38 5.38 6.25 6.50 8.00 SQ MAX 111 111 137 137 159 159 165 165 165 203 203
C MIN 5.65 6.19 7.25 8.12 9.55 C MIN 144 144 157 157 184 184 206 206 206 243 243
C MAX 6.19 7.60 8.84 9.19 11.31 C MAX 157 157 193 193 225 225 233 233 233 287 287
HB
M O D E L
354
Shaft Diameter - Integer & 1st 2 decimals, in Inches Rotor Material - A = MECO3000 FDA PTFE (recommended) F = UHMW Stator Material - 4 = Type 304 Stainless; 6 = Type 316L Stainless Elastomer - Choose 1: W = FDA White Silicone; V = Viton E = EPDM Housing (HSG) #: 1, 2, 3, 4 or 5 Housing Material - Choose 1: Z = Anodized Aluminum; S = 316L Stainless; P = FDA Nylon
TEMPERATURE MECO3000
(recommended)
-60 to 500F (-50 to 260C) Vacuum to 30 psig (210 kPa) to 250 RPM -178 to 135F (-117 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM
-35 to 200F (-37 to 94C) Vacuum to 15 psig (105 kPa) to 150 RPM -35 to 135F (-37 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM
-60 to 500F (-50 to 260C) Vacuum to 30 psig (210 kPa) to 200 RPM -178 to 135F (-117 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM
UHMW
PRESSURE SPEED
Mechanical Capabilities:
Barrier Options below: Air or N2, Typical 1/4 scfm (7 lpm) @ 10 psig (0,7 bar) Water Flush or C.I.P.
Silicone elastomer -178 to 500F (-117 to 260 C) Viton elastomer -75 to 450F (-59 to 232 C) EPDM elastomer -70 to 325F (-56 o 163C)
Results may vary with operating conditions - please call for discussion.
Distributed by: