Professional Documents
Culture Documents
Anti-Static and Clean-Room Equipment: Static Eliminator General Catalogue
Anti-Static and Clean-Room Equipment: Static Eliminator General Catalogue
2
Printing defects Conveyance failures
Ink smudges, bleeds, and misaligns, Products stick together, or stick to the
leading to printing defects equipment, leading to conveyance failures
3
Eliminating static electricity is the key. Preventing misalignment
Preventing double feeding of trays
KEYENCE solutions prevent workpiece
deliver higher
productivity and
improved quality
in all types of
industrial sites
Preventing Preventing
adhesion of dust electrostatic destruction
Preventing foreign particles from adhering to trays Preventing electrostatic destruction
KEYENCE solutions prevent dust adhesion caused KEYENCE solutions prevent parts being destroyed
by static electricity. by static electricity discharges.
4
Preventing spillage Preventing jamming
Preventing parts spillage Preventing conveyance failures
KEYENCE solutions prevent parts spilling KEYENCE solutions eliminate jamming of parts
out of the container due to static electricity. due to static electricity generated by friction.
Preventing Preventing
abnormal discharges cosmetic defects
Preventing shocking of operators Eliminating contamination
KEYENCE solutions prevent operators KEYENCE solutions remove dust clinging
from receiving shocks due to static to surfaces because of static electricity.
electricity discharges.
5
Three steps to solving the problem of static
electricity
Three crucial steps toward conquering static electricity
Step Measure ? kV
1 the static
Start by measuring the amount
kV
Static
Step
elimination
2 Eliminate the static. Select the
equipment and method for
removal according to the
amount of static electricity
present.
Maintenance
needs to be maintained.
of equipment
Step
Elapsed time
6
KEYENCE solutions
Bar type
Diverse lineup, with options
to suit any equipment or
Blower type Spot type
environment
Our extensive product line-up
lets you choose a solution
according to the amount of static
electricity present and the size of
the charged area. You can also
consult our highly-experienced
sales engineers, free of charge.
Extremely low Even if the electrode probe gets dirty, the ion Electrode probe structure makes
balance is corrected automatically maintenance extremely easy
maintenance Data for change over time in ion amount (example)
100%
labour, maintenance work is
80%
difficult to standardise. KEYENCE 60% + ions
- ions
can help you reduce the number 40%
spends on maintenance. 0%
0 120 240 360 480 600
Time elapsed [h]
As mentioned above, the amount of positive (+) and negative (-) ions generated
decreases as the electrode probe gets dirty, and the static elimination speed
decreases accordingly. Additionally, the ion balance deteriorates as the positive
and negative ions decrease by different amounts.
Note: Different models have different functions and structures. For details, see the page for the model in question.
7
KEYENCE sensing ionisers
8
High-speed static elimination
AC method
Ion generation
+7 kV
+3 kV
High-
voltage AC 0
power -3 kV
supply
-7 kV
Ion generation
Pulse AC method
Ion generation
+7 kV
+3 kV
0
Power Power
supply for supply for -3 kV
positive ions negative ions
-7 kV
Ion generation
Power Power +
supply for supply for
positive ions negative ions
−
120%
100%
60% + ions
- ions
40%
20%
0%
0 120 240 360 480 600
Time elapsed [h]
As mentioned above, the amount of positive (+) and negative (-) ions generated
decreases as the electrode probe gets dirty, and the static elimination speed
decreases accordingly. Additionally, the ion balance deteriorates as the positive
and negative ions decrease by different amounts.
9
Static eliminators are available in three types.
Choose the type that's right for your application.
Bar type
Target static elimination area (guideline): 300 mm upwards
Blower type
Target static elimination area (guideline): 200 mm to 1000 mm
Spot type
Target static elimination area (guideline): up to 200 mm
10
Selection Guide
installation
location Cell or workbench Blower type P16
static
elimination
speed Target stopped or moving at low speed All P12, 16, 20
11
Ultra High Speed Sensing Ioniser Hybrid Type
SJ-E
400
300
0 1 2 3 4 5
Assist air
Static elimination time (s)
300
150
mm
100
50
0
−50
−100
−150
−600 −500 −400 −300 −200 −100 0 100 200 300 400 500 600
2.4
2.2
2.0
1.8
1.6
1.4
1.2
12
SENSING IONISER > Bar Type > SJ-E Series > SJ-E
Applications
Static elimination when Static elimination during fork Static elimination when Static elimination during air
transferring liquid crystal glass transfering of liquid crystal transferring film showers
glass
Bar Type
* Elective length indicates the static elimination range at
Variations 50 mm operating distance of SJ-EH. Specifications
Static elimination Model SJ-EL Series / SJ-EH Series
bar length Model
(Effective length) Ion generation method Corona discharge method
Structure Shockless resistor connection type
350 mm
SJ-E036(L)(H)
(420 mm)
Voltage application method/applied voltage Pulse AC method/±8,000 V
13
Sheath-Sensing Ioniser
SJ-H SJ-H Series front view Support air
Air supply
Conventional model I.R.G. structure Conventional model Sheath air guide structure
(Cross-sectional view of the electrode probe cap) (Cross-sectional view of the electrode probe cap)
KEYENCE SJ-G
KEYENCE SJ-G
800 2.6
Charged voltage (V)
0 1.2
1.0
0 0.5 1.0
0 500 1000 1500 2000 2500 3000
Static elimination time (sec)
Measuring conditions: Time elapse (h)
Time required for static elimination from ±1000 V to ±100 V Measuring conditions:
150 mm x 150 mm plate monitor (20 pF) is used. Time required for static elimination from ±1000 V to ±100 V
SJ-H108 and SJ-G108 are used. Without down flow, Without air purge 150 mm x 150 mm plate monitor (20 pF) is used.
Air supply: 0.1 MPa, Down flow: 0.3 m/s
14
SENSING IONISER > Bar Type > SJ-H Series > SJ-H
Applications
Static elimination from films Static elimination from Static elimination from PCB Static elimination in lens
liquid crystal glass mounting processes
Bar Type
* Elective length indicates the static elimination range at
Variations 50 mm operating distance. Specifications
Static elimination bar Model SJ-H/SJ-HV/SJ-HC Series
Model
length (Effective length)
Ion generation method Corona discharge method
380 mm (360 mm) SJ-H036 Structure Shock-proof resistance coupled
600 mm (600 mm) SJ-H060 Voltage application method / Applied voltage Pulse AC method / ±7000 V
840 mm (840 mm) SJ-H084 Ion balance control system Dual I.C.C. method
*1
Ion balance ±30 V
1080 mm (1080 mm) SJ-H108
Operating distance 50 to 2000 mm
1320 mm (1320 mm) SJ-H132
Control input NPN open-collector or non-voltage contact signal
1560 mm (1560 mm) SJ-H156
Control output NPN type photorelay, 100 mA max. (40 V max.)
1800 mm (1800 mm) SJ-H180 Power supply voltage 24 to 36 VDC ±10%
2040 mm (2040 mm) SJ-H204 Current consumption 500 mA (at 24 V) / 350 mA (at 36 V)
Ratings
2280 mm (2280 mm) SJ-H228 Overvoltage category I
Pollution degree 2
2520 mm (2520 mm) SJ-H252
Major functions Condition alert, Ion level alert, Alarm output
3000 mm (3000 mm) SJ-H300
Air purge connection port Rc1/8
Air purge supply pressure 0.5 MPa max. *2
Electrode probe Tungsten (silicon)
Material
Body ABS/PC
Environmental Operating ambient temperature 0 to +40°C
resistance Operating relative humidity 35 to 85%RH (No condensation)
Lineup
Industry-best static elimination capacity & usability Clean & maintenance-saving
SJ-H Series SJ-HV Series
Laminar flow
of ions
+ Laminar flow of ions
Laminar flow
Support air
of ions Support air
[1] High-speed static elimination from short to long distances [1] High speed static elimination achieved with low air flow
[2] Achieving both high speed and reduced maintenance [2] Reduce dust adhesion on the probe tips while saving air consumption
[3] Booster attachable for wide-angle or ultra-long distance operation [3] Flat-tipped probe for reducing dust accumulation
Ion
+
Support air
15
High Speed, High Precision, Wide Static Elimination Blower
SJ-F2000/F5000
Pulse width
can be changed Control the
amount of ions
16
14 Conventional DC type
12
10
8
6
4 I.C.C. + Pulse AC type
2
0
0 500 1000 1500 2000
Start measurement Time elapse (h)
16
SENSING IONISER > Blower Type > SJ-F Series
temperature
resistance
Blower Type
Type 300 mm type 600 mm type 300 mm type 600 mm type
Model SJ-F2000 SJ-F5000 SJ-F2010 SJ-F5010
Voltage application method Pulse AC method
Applied voltage ±7000V
Ion balance control method I.C.C. method
Ion balance*1 ±5V
Static elimination time*2 Approx.1 sec
Operating distance 50 mm min.
Maximum wind speed*1 3.5 m/s
Maximum air volume 2.5 m3/min 6.2 m3/min 2.5 m3/min 6.2 m3/min
Ozone density 0.005 ppm max.
Control
input
NPN open-
Alarm/ — 100 mA (40 V max.)
collector
Control
output
*1 Measured at a distance of 300 mm from the front of the fan Voltage application method Variable DC method
*2 Measured at a distance of 300 mm from the front of the fan and at maximum air volume Applied voltage ±7000 V max.
Ion balance control method I.C.C. method
Static elimination time * Approx. 1 sec.
Ion balance * ±5 V
AC adapter Maximum wind speed * 1.5 m/s
Maximum air volume 1 m3/min
Type SJ-U2
Ozone density 0.005 ppm max.
Rated input 100 to 240 VAC (50/60Hz)
Rating Control input Static elimination stop Input NPN open-collector or non-voltage contact signal
Rated output 24VDC 2.65A
Operating ambient Alarm output
0°C to +35°C
temperature Control output Ion level alert output NPN open-collector, 100 mA max. (40 V max.)
Condition alert output
17
Free-layout Static Elimination Blower
SJ-F030 / SJ-F035
High-speed &
long-range type
SJ-F035
High-precision &
wide-area type
Up to five I.C.C. static elimination blowers can be connected with a single controller.
The SJ-F030/F035 is the first product Static elimination area (When 5 blowers are connected)
in the world to enable connection of 1200 800 400 0 400 800 1200
mm mm
five I.C.C. static elimination blowers
with a single controller. Since the I. 200
C.C. control system is provided for 400
each blower, individual blowers control 600
2s
the ion supply volume according to the 800
charge level, conducting static 3s
1000
elimination simultaneously in several 4s
1200
areas. Thus, the SJ-F030/F035 ensure 5s
1400
an optimum static elimination
environment. 1600
mm * Measuring conditions for KEYENCE comprison test (SJ-F030) Charged voltage: from 1 kV to 100 V,
Plate monitor: 150 mm x 150 mm (20 pF) Air volume: MAX
Controller Tilt angle: 30°, Swing angle: 90° Connectable overall length: 10 m max.
(for DIN rail mounting) Swing installation is enabled. * 20 m extension is allowed for connection of one unit.
Space-saving and less wiring steps Effective for wide-area static elimination
Up to five blowers can be connected to a single controller. Because of When five blowers are connected, the SJ-F030/F035 can cover a static
the ultra-slim design (40% size reduction from conventional models), the elimination area up to ten times larger than conventional models. When
SJ-F030/F035 can be mounted to a DIN rail, which can save space in a two types of blowers are combined according to static elimination
control panel, thus making contributions to size and cost reductions. needs, the SJ-F030/F035 enable static elimination in a wide area, and
Individual blowers can be easily connected with a connector. The 24 V over several charged points, which are difficult with conventional
low-voltage wiring is safe and easy to connect, resulting in less wiring models.
steps.
18
SENSING IONISER > Blower Type > SJ-F Series
High-speed &
High-precision & long-range type
wide-area type
SJ-F036
SJ-F031
Blower Type
is necessary that the layout of ionisers
should be considered in the design
Mounting bracket Mounting bracket
stage. However, since the SJ-F031/F036 OP-84374 OP-78477
are small-sized and need no additional
amplifier, there is no limitation on
installation space, and the SJ-F031/F036
can easily cope with system extension. When the mounting When the mounting
bracket is attached bracket is attached
Two types of standard mounting
brackets are optionally available. * The SJ-F031/F036 include OP-84374.
Specifications
Controller SJ-F300
Model SJ-F031 SJ-F036
Static elimination blower SJ-F030 SJ-F035
Voltage application method Variable DC Variable DC
Applied voltage ±7000 V max. ±7000 V max.
Ion balance control method I.C.C. method I.C.C. method
Static elimination time *1 Approx. 2 sec. Approx. 0.7 sec. Approx. 2 sec. Approx. 0.7 sec.
Ion balance *1 ±5 V ±10 V ±5 V ±10 V
Maximum wind speed * 2 0.8 m/s 3.5 m/s 0.8 m/s 3.5 m/s
3 3
Maximum air volume 3.1 m /min. 3.1 m /min.
Ozone density 0.005 ppm max. 0.005 ppm max.
Control input Input NPN open-collector or non-voltage contact signal NPN open-collector or non-voltage contact signal
Alarm output
Control output Ion level alert output NPN open-collector, 100 mA max. (40 V max.) NPN open-collector, 100 mA max. (40 V max.)
Condition alert output
Power supply voltage 24 VDC ±10% 24 VDC ±10%
Ratings
Current consumption 1.2 A max. (per blower) 1.2 A max.
Environmental Operating ambient temperature 0 to +50°C 0 to +50°C
resistance Operating relative humidity 35 to 65%RH (No condensation) 35 to 65%RH (No condensation)
Weight Static elimination blower: Approx. 620 g, Controller: Approx. 320 g Approx. 620 g
*1 Measured at 300 mm from static elimination blower front surface (SJ-F030/F031), Air volume: MIN. SJ-F035/F036, Air volume: MAX)
*2 Measured at 300 mm from static elimination blower front surface
AC adaptor
Model SJ-U2
Rated input 100 to 240 VAC (50/60Hz)
Ratings
Rated output 24VDC 2.65A
Environmental Operating ambient temperature 0°C to +35°C
resistance Operating relative humidity 20 to 80% (No condensation)
Weight Approx. 250 g
* For details of the AC cable, contact the KEYENCE sales office in your district.
19
High Performance Micro Static Eliminator
SJ-M Series
SJ-M200/300 Series
Micro static eliminators supporting the air blow gun attachment SJ-M400 Series
High-pressure air purge with pulsed air function Supports air blow gun attachment
The solenoid valve control function allows intermittent emission of a In response to growing
powerful stream of ionised air at a pressure of up to 0.7 MPa. Dust and demand, an air blow gun
dirt clinging stubbornly to the target surface is removed effectively by attachment is now
applying vibration. Additionally, the use of an intermittent (pulsed) air available. This facilitates
stream enables 50% reduction in air relative to a continuous air stream. static elimination in cell
processes and other
Continuous air Pulsed air
processes requiring
prevention of adhesion of
dust and foreign particles.
20
SENSING IONISER > Spot Type > SJ-M Series
Specifications
Controller SJ-M200 SJ-M300 SJ-M400
Model SJ-M020G SJ-M020G SJ-M030C/ SJ-M070C/
Head SJ-M020G SJ-M040
(0.6 m) (1.2 m) 030G/030V/030VC 070G/070V/070VC
Voltage application method Pulse AC method
Applied voltage ±5.5 kV
Rated output voltage ±6 kV
Ion balance control method I.C.C. method
Ion balance*1 ±15 V ±30 V
Total length*2 - 220 mm 380 mm -
Effective
- 164 mm 324 mm -
static-elimination length*3
Supply pressure range 0.001 to 0.5 MPa*4 0.2 MPa max 0.7 MPa max
Control Static elimination
Non-voltage input
input stop input
Alarm
Control NPN open collector
Ion level alarm
output 100 mA (40 V or lower)
Condition alarm
Power voltage 24 V DC ±10%
Ratings
Current consumption 450 mA or lower
Operating ambient
0 to +80°C*5 0 to +40°C
temperature (Head)
Environmental Operating ambient 0 to +40°C
resistance temperature (Controller)
Operating
35 to 65% RH (no condensation)
ambient humidity
Controller Approx. 300 g
Weight
Head Approx. 600 g Approx. 480 g Approx. 540 g Approx. 600 g Approx. 720 g Approx. 650 g
*1 Measured under the following conditions. *2 Total length includes mounting brackets. *3 Effective length is for static elimination range when installation distance is
50 mm. *4 Contact KEYENCE for information about derating for humidity and pressure when the ambient operating temperature exceeds 35°C. For the supply fluid, use clean
dry air with a dew point of -20°C or lower. The minimum air volume varies according to the nozzle type. Contact KEYENCE for more information. *5 The supply fluid
temperature should be 40°C or less. For high-pressure cable only. For other parts, the operating ambient temperature is 0 to 40°C.
Spot Type
wide-range static
elimination when changing
angle and direction
Silicon SJ-M030C
Optimal for environments
type SJ-M070C where metal contamination
is a problem
Sheath SJ-M030V
Optimal for clean-room
SJ-M030G type SJ-M070V
environments
21
Hand-held Static Sensor
SK-H050
STATIC
ELECTRICITY
HUMIDITY Simultaneous measurement High-precision and wide-range measurements
By measuring the static charge and humidity at the same time, you can KEYENCE can accommodate your needs from high-precision
more accurately identify whether a particular area is likely to have measurements with one-volt unit display resolution to measurements of
static-related problems. highly charged objects, up to ±50 kV.
Computer
USB cable
Transfer
22
STATIC SENSOR > SK Series
Wire-saving
STATIC
ELECTRICITY
HUMIDITY Simultaneous measurement High-precision and wide-range measurements
By measuring the static charge and humidity at the same time, you can KEYENCE can accommodate your needs from high-precision
more accurately identify whether a particular area is likely to have measurements with one-volt unit display resolution to measurements of
static-related problems. highly charged objects, up to ±50 kV.
Main body
Independent 3-output judgement
Analogue voltage/current
PROFINET
Communication unit
Enter installation Measurement value
PROFIBUS
distance corrected
EtherNet/IPTM
DeviceNetTM
CC-Link
RS-232C communication
BCD output
23
Relationship between static electricity and humidity
Static electricity and humidity are correlated: when humidity exceeds Relationship between humidity and static charge
(typical example)
60% RH, static charge is less likely to accumulate. Even during wintertime,
4
0 20 40 60 80 100
Humidity [% RH]
Lineup/Options
24
STATIC SENSOR > SK Series
Specification
Hand-held type
Model SK-H050
Measurement mode High-precision mode Wide-range mode
Measuring distance 25 mm 100 mm
Charge potential Measuring range ±2 kV ±50 kV
measurement Measuring accuracy *1 ±10 V ±100 V *2
Display resolution 0 to 999 V: 1 V, 1.00 to 9.99 kV: 0.01 kV. 10.0 kV and higher: 0.1 kV
Sampling cycle Approx. 1.4 ms
Measuring range 0 to 40°C
Temperature Measuring accuracy *3 ±1°C
measurement Display resolution 0.1°C
Sampling cycle 1s
Measuring range 10 to 85% RH
Humidity Measuring accuracy *3 ±5% RH
measurement Display resolution 1% RH
Sampling cycle 1s
Ion balance measuring range ±1 kV
Ion balance
Measuring accuracy *5 ±10 V
measuring mode
Charge Measured voltage display resolution 1V
monitor function
*4 Static elimination Charge voltage ±1400 V
time measuring Static elimination time display resolution 0.1 s
mode Measuring time 0 to 99 s
Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 *6)
PC interface USB 2.0 Full Speed
Power supply 2 AA alkaline dry-cell batteries
Power supply
Operating time 8 hours (in charge potential measuring mode)
Environmental Operating ambient temperature 0 to 40°C (no freezing or condensation)
resistance Operating relative humidity *7 10 to 85% RH (no condensation)
Material SK-H050: PC-ABS, PC, SUS/SK-H055: PC, SUS, PTFE, PVC
Weight SK-H050: Approx. 240 g, SK-H055: Approx. 220 g
*1 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from measurements with a
response time of 0.8 seconds.
*2 Measuring accuracy is satisfied in the range of ±30 kV. *3 25°C, 50% RH. *4 SK-H055 is required. *5 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value).
*6 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50. *7 10 to 60% RH when using SK-H055.
Display
Display range ±99.999 kV to 99 kV (4-level selection available)
Analogue voltage output *1 ±5 V, 1 to 5 V, 0 to 5 V, output impedance 100 Ω
N/A
Analogue current output *1 4 to 20 mA, maximum load resistance 350 Ω
Zero-shift input
Timing input
Control input *2 Non-voltage input
Reset input
Bank input
Judgement output Open collector output (NPN/PNP switching, N.O./N.C. switching)
Control output *3
Alarm output Open collector output (NPN/PNP switching, N.C.)
Power supply voltage *4 10 to 30 VDC, including 10% ripple (P-P) Supplied from main unit
Power supply
Power consumption (excluding load current of each output) *5 1650 mW or below (55 mA or below with 30 V) 1170 mW or below (39 mA or below with 30 V)
Environmental Operating ambient temperature 0 to 50°C (no freezing or condensation)
resistance Operating relative humidity 10 to 85% RH (no condensation)
Material Body case and front cover: PC, Key top: POM, Cable: PVC
Weight (including accessories) Approx. 150 g Approx. 140 g
*1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA selected for use.
*2 Inputs are assigned to the four external input lines. Non-voltage input rating: ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating: maximum input rating is 30 V, ON voltage
7.5 V or higher, OFF current 0.05 mA or below.
*3 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added) 30 V or below, residual voltage 1 V or below (1.5 V or below when adding 6 or more expansion
units, including main unit). PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added) below power supply voltage, residual voltage 2 V or below (2.5 V or
below when adding 6 or more expansion units, including main unit).
*4 Use 20 to 30 V as power supply voltage when 6 or more expansion units, including main unit, are to be used. *5 When connecting 8 units for DL connection, maximum power is consumption 11.3 W.
25
SJ-EH
Static elimination range and time (0.2 MPa) Static elimination range and time (0.5 MPa) Characteristic of air supply volume versus air
pressure
450 300 150 150 300 450 mm 450 300 150 150 300 450 mm
1400
1200
0.5 sec
300 300
1000
600
900 900
1 sec 400
2 sec
200
1200 1200
SJ-EL
Static elimination range and time (0.2 MPa) Static elimination range and time (0.5 MPa) Characteristic of air supply volume versus air
pressure
450 300 150 150 300 450 mm 450 300 150 150 300 450 mm
250
2 sec
4 sec 100
900 900
50
6 sec
1200 1200
4 sec
26
Data
SJ-H
Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time
(33 Hz) (10 Hz) (1 Hz)
150 100 50 50 100 150 mm 450 300 150 150 300 450 mm 600 450 300 150 150 300 450 600 mm
300
50 300
4sec
600
5sec
6sec
100 0.4sec 600 900
0.6sec
10sec
0.8sec 1200 10sec
1.2sec 1.0sec 30sec 15sec
150 900
mm mm
Measurement conditions: Measurement conditions:
1500 30sec 20sec
Static elimination from ±1000 V to ±100 V Static elimination from ±1000 V to ±100 V
mm
Using 150 x 150 mm plate monitor (20 pF). Using 150 x 150 mm plate monitor (20 pF). Measurement conditions: Static elimination from ±1000 V to ±100 V
Model: SJ-H108, No downflow Model: SJ-H108, Under a 0.3 m/s downflow. Using 150 x 150 mm plate monitor (20 pF).
Model: SJ-H108, Under a 0.3 m/s downflow.
Relationship between air pressure and air volume Relationship between static elimination speed and Static elimination range vs. Static elimination time
according to static elimination bar length operating distance according to air pressure (with maximum
(When air is supplied from both sides) air supply)
600 450 300 150 150 300 450 600 mm
2000 10
SJ-H036
1800 SJ-H060
0MPa
SJ-H084
1600 8 0.001MPa
SJ-H108 300
Static elimination time (sec)
Supplied air volume (Nl/min)
0.01MPa
1400 SJ-H132
0.2MPa
SJ-H156
1200 SJ-H180 6 0.5MPa
SJ-H204 600 0.5sec
1000
SJ-H228
800 SJ-H252 4
SJ-H300 900
600
400 2
1sec
200 1200
0 0
0 0.1 0.2 0.3 0.4 0.5 0 50 100 150 200 250 300
Air pressure (MPa) Operating distance (mm) 1500 3sec 2sec
Measurement conditions: mm
Measurement conditions:
Static elimination from ±1000 V to ±100 V
Static elimination from ±1000 V to ±100 V
Using 150 x 150 mm plate monitor (20 pF).
Using 150 x 150 mm plate monitor (20 pF).
Model: SJ-H108, No downflow
Model: SJ-H108, No downflow
SJ-HV
Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time
(33 Hz) (10 Hz) (1 Hz)
150 100 50 50 100 150 mm 450 300 150 150 300 450 mm 600 450 300 150 150 300 450 600 mm
300
50 300
4sec
600
6sec
100 0.4sec 600 5sec 900
0.6sec
10sec
0.8sec 1200
10sec
1.2sec 1.0sec 30sec 15sec
150 900
mm mm
Measurement conditions: Measurement conditions:
1500 30sec 20sec
Static elimination from ±1000 V to ±100 V Static elimination from ±1000 V to ±100 V
mm
Using 150 x 150 mm plate monitor (20 pF). Using 150 x 150 mm plate monitor (20 pF). Measurement conditions: Static elimination from ±1000 V to ±100 V
Model: SJ-H108V, Air supply: 16 L/min, No downflow. Model: SJ-H108V, Air supply: 16 L/min, Using 150 x 150 mm plate monitor (20 pF).
Under a 0.3 m/s downflow. Model: SJ-H108V, Air supply: 16 L/min, Under a 0.3 m/s downflow.
Relationship between air pressure and air volume Relationship between static elimination speed and Static elimination range vs. Static elimination time
according to static elimination bar length operating distance according to air pressure (with maximum
(When air is supplied from both sides) air supply)
600 450 300 150 150 300 450 600 mm
250 10
SJ-H036V
SJ-H060V 0MPa
SJ-H084V 0.05MPa
200 SJ-H108V 8 0.1MPa 300
Static elimination time (sec)
Supplied air volume (Nl/min)
SJ-H132V 0.2MPa
SJ-H156V 0.5MPa 2sec
150 SJ-H180V 6
SJ-H204V 600
SJ-H228V
100 SJ-H252V 4
SJ-H300V 4sec
900
50 2
1200 6sec
0 0
0 0.1 0.2 0.3 0.4 0.5 0 50 100 150 200 250 300
Air pressure (MPa) Operating distance (mm) 1500 12sec 8sec
Measurement conditions: mm 10sec
Static elimination from ±1000 V to ±100 V
Using 150 x 150 mm plate monitor (20 pF). Measurement conditions:
Model: SJ-H108V, No downflow Static elimination from ±1000 V to ±100 V
Using 150 x 150 mm plate monitor (20 pF).
Model: SJ-H108V, No downflow
27
SJ-HC
Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time
(33 Hz) (10 Hz) (1 Hz)
150 100 50 50 100 150 mm 450 300 150 150 300 450 mm 600 450 300 150 150 300 450 600 mm
300
4sec
50 300
600
5sec 6sec
Relationship between air pressure and air volume Relationship between static elimination speed and Static elimination range vs. Static elimination time
according to static elimination bar length operating distance according to air pressure (with maximum
(When air is supplied from both sides) air supply)
600 450 300 150 150 300 450 600 mm
900 10
SJ-H036C
SJ-H060C 0MPa
800
SJ-H084C 0.002MPa
700 SJ-H108C 8 0.01MPa 300
Static elimination time (sec)
Supplied air volume (Nl/min)
SJ-H132C 0.2MPa
600 SJ-H156C 0.5MPa 0.5sec
SJ-H180C 6
500 SJ-H204C 600
SJ-H228C
400
SJ-H252C 4
300 SJ-H300C 900 1sec
200
2
100 1200
0 0
0 0.1 0.2 0.3 0.4 0.5 0 50 100 150 200 250 300
Air pressure (MPa) Operating distance (mm) 3sec 2sec
1500
Measurement conditions: Static elimination from ±1000 V to ±100 V mm
Measurement conditions: Static elimination from ±1000 V to ±100 V
Using 150 x 150 mm plate monitor (20 pF).
Using 150 x 150 mm plate monitor (20 pF).
Model: SJ-H108C, No downflow
Model: SJ-H108C, No downflow
Static elimination range vs. Static elimination time Static elimination range vs. Static elimination time Relationship between air pressure and air volume
(33 Hz) (10 Hz) according to static elimination bar length
600 450 300 150 150 300 450 600 mm 600 450 300 150 150 300 450 600 mm
5000
SJ-H036
4500 SJ-H060
SJ-H084
4000
Supplied air volume (Nl/min)
300 SJ-H108
0.5sec
0.5sec 300 3500 SJ-H132
SJ-H156
1.0sec 3000 SJ-H180
600 SJ-H204
2500
1.0sec SJ-H228
600 2000 SJ-H252
2.0sec
SJ-H300
900 1500
3.0sec
2.0sec 1000
900
1200 500
0
0 0.1 0.2 0.3 0.4 0.5
1500 3.0sec 1200 Air pressure (MPa)
mm mm
Measurement conditions: Static elimination from ±1000 V to ±100 V Measurement conditions: Static elimination from ±1000 V to ±100 V
Using 150 x 150 mm plate monitor (20 pF). Using 150 x 150 mm plate monitor (20 pF).
Model: SJ-H060 + SJ-HW01/02, No downflow. Model: SJ-H060 + SJ-HW01/02, No downflow.
Air supply: SJ-H060: 0.1 MPa SJ-HW01/02: 0.5 MPa Air supply: No supply with SJ-H060, 0.25 MPa with SJ-HW01/02
(50 L/min per electrode)
Static elimination range vs. Static elimination time Relationship between static elimination speed and Relationship between air pressure and air volume
(33 Hz) operating distance according to air pressure according to static elimination bar length
28
Data
SJ-F030 / F031
Static elimination range and time (Typical) Static elimination speed (Typical)
0 200 400 600 800 1000 1200 1400 1600 mm
400 1
0.8
200
0 1s 2s 3s 4s 5s 0.4
0.2
200
0
400 -0.2
mm 0 1 2 3 4
Static elimination time (sec)
Measuring conditions: Measuring conditions:
Static elimination from ±1000 V to ±100 V Operating distance: 300 mm
Plate monitor: 150 mm x 150 mm (20 pF) Plate monitor: 150 mm x 150 mm (20 pF)
(Air volume: MAX) (Air volume: MAX)
SJ-F035 / F036
Static elimination range and time (Typical) Static elimination speed (Typical)
0 200 400 600 800 1000 1200 1400 1600 mm
400 1
0.8
200
0 1s 2s 3s 4s 5s 0.4
0.2
200
0
400 -0.2
mm 0 1 2 3 4
Static elimination time (sec)
Measuring conditions:
Measuring conditions:
Static elimination from ±1000 V to ±100 V
Operating distance: 300 mm
Plate monitor: 150 mm x 150 mm (20 pF)
Plate monitor: 150 mm x 150 mm (20 pF)
(Air volume: MAX)
(Air volume: MAX)
SJ-F010
Static elimination range and time (Typical) Comparison of static elimination speed
0 100 200 300 400 500 600 mm
200 1
5s Conventional AC-type static eliminator
SJ-F010 / F100
100
Charged voltage (KV)
1s 2s 3s 4s
0
100
0
SJ-F2500 SJ-F5500
200 400 600 800 1000 1200 1400 1600 mm 200 400 600 800 1000 1200 1400 1600 mm
600 600
5s
4s
5s
1s 2s 3s 4s
1s 2s 3s
0 0
600 600
mm mm
Measuring conditions: Measuring conditions:
Static elimination from ±1000 V to ±100 V Static elimination from ±1000 V to ±100 V
Plate monitor: 150 mm x 150 mm (20 pF) Plate monitor: 150 mm x 150 mm (20 pF)
(Air volume: MAX) (Air volume: MAX)
29
SJ-M010/M020 SJ-M020G
Static elimination range: Air volume: 60 NL/min Static elimination range: Air volume: 20 NL/min
(Pressure: 0.05 MPa) (Pressure: 0.02 MPa)
mm mm
1000 600
5sec
900 10sec
500
800
5sec
700 400
600
2sec 300
500
400 2sec
200
300 1sec
1sec
200 100
0.5sec 0.5sec
100
0 0
200 150 100 50 0 50 100 150 200 mm 200 150 100 50 0 50 100 150 200 mm
Static elimination range: Air volume: 250 NL/min Static elimination range: Air volume: 60 NL/min
mm (Pressure: 0.5 MPa) (Pressure: 0.12 MPa)
1500
2sec mm
1350 1000
1sec 3sec
1200 900
900 700
750 600
0.5sec
600 500
1sec
450 400
300 300
150 200
100 0.5sec
0
200 150 100 50 0 50 100 150 200 mm
0
200 150 100 50 0 50 100 150 200 mm
Relationship between static elimination speed Static elimination range: Air volume: 200 NL/min
and operating distance by air pressure (Pressure: 0.5 MPa)
4.0
20NL mm
1500
3.5 60NL 1.5sec
1400 1sec
250NL
1300
3.0
Static elimination time (sec)
1200
1100
2.5
1000
900
2.0
800 0.5sec
1.5 700
600
1.0 500
400
0.5 300
200
0.0 100
0 50 100 150 200 250
0
Operating distance (mm)
200 150 100 50 0 50 100 150 200 mm
Relationship between air pressure and air volume Relationship between air pressure and air volume
350 350
SJ-M020 SJ-M020G
300 SJ-M020+SJ-MS2 300 SJ-M020G+SJ-MS2
SJ-M020+SJ-MS1 SJ-M020G+SJ-MS1
250 SJ-M020+SJ-MS3 SJ-M020G+SJ-MS3
250
SJ-M020+SJ-MS4 SJ-M020G+SJ-MS4
Air volume (Nl/min)
SJ-M020+SJ-ML SJ-M020G+SJ-ML
200 200
150 150
100 100
50 50
0 0
0 0.2 0.4 0.6 0 0.2 0.4 0.6
Air pressure (MPa) Air pressure (MPa)
30
Data
SJ-M030 SJ-M030G
Static elimination range and time Static elimination range and time
(8 Hz) (8 Hz)
450 300 150 150 300 450 mm 450 300 150 150 300 450 mm
300 300
5sec
10sec 5sec
600 600
15sec
10sec
30sec 15sec
900 900
mm Measuring conditions: mm Measuring conditions:
Static elimination from ±5000 V to ±500 V Static elimination from ±5000 V to ±500 V
150 mm x 150 mm plate monitor (20 pF) is used. 150 mm x 150 mm plate monitor (20 pF) is used.
SJ-M030/M030C is used. Down flow: 0.3 m/s SJ-M030G is used. Down flow: 0.3 m/s
3 NL/min (per electrode), Air purge
Static elimination range and time Static elimination range and time
(1 Hz) (1 Hz)
600 450 300 150 150 300 450 600 mm 600 450 300 150 150 300 450 600 mm
300 300
4sec
4sec
600 600
6sec
10sec
900 900
10sec Measuring conditions:
Measuring conditions: Static elimination from
Static elimination from ±5000 V to ±500 V
1200 20sec ±5000 V to ±500 V 1200 150 mm x 150 mm plate
150 mm x 150 mm plate monitor (20 pF) is used
monitor (20 pF) is used. SJ-M030G is used.
30sec SJ-M030/M030C is used. 20sec Down flow: 0.3 m/s
1500 Down flow: 0.3 m/s 1500 3 NL/min (per electrode), Air purge
mm mm
Relationship between static elimination speed Relationship between static elimination speed
and operating distance by air pressure and operating distance by air pressure
10
10
9 0
0.001MPa 9 3 NL/min (per electrode)
8 0.01MPa 0.02MPa
8
Static elimination time (sec)
0.2MPa 0.2MPa
Static elimination time (sec)
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0 100 200 300 0
0 100 200 300
Operating distance (mm)
Operating distance (mm)
* “3 NL/min” (per electrode) is the minimum flow rate required to obtain CAB effect.
Relationship between air pressure and air volume Relationship between air pressure and air volume
60 60
50 50
Air volume (Nl/min)
40
Air volume (Nl/min)
40
30 30
20 20
10 10
0 0
0 0.05 0.1 0.15 0.2 0 0.05 0.1 0.15 0.2
Air pressure (MPa) Air pressure (MPa)
31
SJ-E Series
A
41.8 Attach one supplementary 41.8
23.8 10.5 28.5 5 support component per metre. 10 23.8
23
60.3 60.3
(84)
73.5
Rc1/8 9 Rc1/8
B
C
45
40 10
10
Model SJ-E036x SJ-E060x SJ-E084x SJ-E108x SJ-E132x SJ-E156x SJ-E180x SJ-E204x SJ-E228x SJ-E252x SJ-E300x
Effective length*1 SJ-EH 420 660 900 1140 1380 1620 1860 2100 2340 2580 3060
(mm) SJ-EL 440 680 920 1160 1400 1640 1880 2120 2360 2600 3080
Total length (mm) 350 560 800 1040 1280 1520 1760 2000 2240 2480 2960
SJ-EL 5 9 13 17 21 25 29 33 37 41 49
No. of electrodes
SJ-EH 9 17 25 33 41 49 57 65 73 81 97
SJ-EL 670 850 1070 1270 1500 1700 1900 2100 2300 2500 2900
Weight (g)
SJ-EH 680 870 1100 1300 1550 1750 1950 2150 2350 2600 3000
*1 The effective length is the static elimination range at the 50 mm operating distance.
E
18.5
Attach one supplementary
34.3 support component per metre. 34.3
49
(68)
99.3 99.3
(123)
65
Rc1/8 Rc1/8
9
F
G
H
18 45
36 * This value is 70 mm
for the SJ-E036x.
30 2.5
(R24)
40 I 40*
32
Dimensions
23.8
45.3 23 23 45.3
52.3 52.3 5
28 5
*1 Detail of slot
5 10 10 5 5.5
10 24.2
4 - slot* 4 - slot* 4.4
10
*Detail of slot
*Detail of slot *2 Detail of slot
11 1.4 36.9
11 23 23
47.6
4 4.4
4.4 12.3 12.3
Rotating end unit Intermediary rotating support bracket Coupling relay box for I/O
OP-87416 OP-87417 OP-87422
70
61.7 2
56
(9)
2 34.3
34.3
48 48
91 62.8
2xø5
84.3
*Detail of slot
(5.5)
4 58
*Detail of slot 47
8 2 - slot* (when rotated 90°)
5.4
(when rotated 90°) (14)
5.2
16 34.3
30 (51.3) 48
48 (R24)
78 62
(50)
36 18 (9)
56.7 25.5
4 - slot* (14)
4.5
Coupling relay box for Rotating end unit for
the communication feature the SJ-E036x
OP-42215 OP-87525
56.7 2
2 x ø4.5
53
6.5
25.4 40 6.5 34.3
91
84.3
40 53
*Detail of slot
8
4 - slot*
Options
10-pin I/O 10 pin to 10 Tungsten Tungsten Standard end Standard
cable pin cable electrode electrode unit L/R intermediary
SJ-C2U OP-42210 probe (pack probe (pack (fixed) support
SJ-C5U OP-42211 of five) of five) OP-87414 bracket (fixed)
for the SJ-EL/ for the SJ-EH/ OP-87415
SJ-C10U OP-42212
SJ-EN SJ-EA
OP-87418 OP-87420
33
SJ-H/HV/HC Series
Unit : mm
9.2
B
A
C
21
SJ-H036*: Without modular cable
D 25
39 23
22.5
*1 SJ-H036: 90 mm
*2 SJ-H036: 21 mm
11
E 12.5
38 *2
12.5
70*1
H SJ-H036 SJ-H060 SJ-H084 SJ-H108 SJ-H132 SJ-H156 SJ-H180 SJ-H204 SJ-H228 SJ-H252 SJ-H300
Model HV SJ-H036V SJ-H060V SJ-H084V SJ-H108V SJ-H132V SJ-H156V SJ-H180V SJ-H204V SJ-H228V SJ-H252V SJ-H300V
HC SJ-H036C SJ-H060C SJ-H084C SJ-H108C SJ-H132C SJ-H156C SJ-H180C SJ-H204C SJ-H228C SJ-H252C SJ-H300C
Effective length *1 360 mm 600 mm 840 mm 1080 mm 1320 mm 1560 mm 1800 mm 2040 mm 2280 mm 2520 mm 3000 mm
Number of H 6 12 18 24 30 36 42 48 54 60 72
electrodes HV/HC 4 8 12 16 20 24 28 32 36 40 48
Controller 150 g − − − − − − − − − −
Weight Static H 510 g 800 g 1000 g 1250 g 1450 g 1600 g 1850 g 2100 g 2400 g 2800 g 3250 g
elimination bar HV/HC 500 g 780 g 980 g 1200 g 1400 g 1550 g 1750 g 2000 g 2350 g 2700 g 3150 g
A Overall length *2 380 600 840 1080 1320 1560 1800 2040 2280 2520 3000
Static elimination bar
B 340 560 800 1040 1280 1520 1760 2000 2240 2480 2960
length
Dimensions C Mounting pitch 365 585 825 1065 1305 1545 1785 2025 2265 2505 2985
D Electrode pitch and length P60 x 3 = 180 P60 x 7 = 420 P60 x 11 = 660 P60 x 15 = 900 P60 x 19 = 1140 P60 x 23 = 1380 P60 x 27 = 1620 P60 x 31 = 1860 P60 x 35 = 2100 P60 × 39 = 2340 P60 × 47 = 2820
E Nozzle pitch and length P120 x 1 = 120 P120 x 3 = 360 P120 x 5 = 600 P120 x 7 = 840 P120 x 9 = 1080 P120 x 11 = 1320 P120 x 13 = 1560 P120 x 15 = 1800 P120 x 17 = 2040 P120 × 19 = 2280 P120 × 23 = 2760
Left side of the bar (Common to all models) Right side of the bar (Common to all models, SJ-H036* Controller
for the SJ-H228 and longer models)
39.5 130
39.5 33
22.5 120 2- ø5
(R24)* Rc1/8*
22.5
(R24) 22 48
71 59
48
(28)* 48.2
Rc1/8 (14.5)
45 (R24)
Rc1/8
45
* The SJ-H036 does not have this modular port. * Not provided for the SJ-H204 and shorter models. (20)
(43) (35)
Standard end unit (fixed) OP-84301 Standard intermediary support bracket (fixed)
OP-84300
(Back)
End unit L End unit R
5
39.5 20 20 39.5
12.5 12.5
22.5 22.5 2-slot (Note 2)
5 10.5 10.5 5 28 (Thickness: 5 mm)
22.5 5
39.5 35 5
35 39.5
23 23
5 5
4-slot 34
4-slot (Note) 45
Details of slot (Note) Details of slot Details of slot Details of slot
12.5 12.5
(Note) 6 (Note) 6 (Note 1) 2.6 (Note 2)
23 23 1.4
34
Dimensions
Unit : mm
B
Left side of the bar Right side of the bar (Common to all models,
C (Common to all models) for the SJ-H228 and longer models)
27.5
21 (79.5) (R24)*
29 18 SJ-H036*: Without modular cable Rc1/8*
99.5 27.5
99.5
73.5
(R24)
23 45
Rc1/8
45 Rc1/8
38*2
* The SJ-H036 does not have this modular port. * Not provided for the SJ-H204 and shorter models.
*1 SJ-H036: 90 mm
30 70*1 *2 SJ-H036: 21 mm
68.6
4 27.5 3
27.5
64.7
91 86
2-slot (Note)
(When rotated at 90°)
(When rotated at 90°)
16 30
Details of slot (Note) Details of slot (Note) 27.5
8 5.4 78 62
(40) (40)
29 18
5.2
63.5 4
4-slot (Note) 40
70
56
(9)
2-ø5 48
47 58
48
(5.5) (14)
48 (9)
48
(R24)
(14) 25.5
4.5
35
SJ-H/HV/HC Series
Unit : mm
(R24) Rc3/8
27.5 Rc3/8 27.5
4 Straight air booster Wide angle booster Sealing
(R24)
51
102 (82)
122
Rc1/8 A Rc1/8
B
C
*1 SJ-H036: 90 mm
21
29 18 *2 SJ-H036: 21 mm
SJ-H036: Without modular cable
42
* The straight air booster and wide angle booster cannot be mounted together.
23
38*2
30 70*1
A B C
(Booster starter unit) (Booster extension unit)
Straight air SJ-HS01 Straight air SJ-HS02
Overall length Mounting pitch Mounting pitch Wide angle SH-HW01 Wide angle SJ-HW02
Options
10-pin I/O cable 10-pin/10-pin cable 10-pin/10-pin cable Tungsten electrode Tungsten electrode Silicone electrode Junction relay
(for SJ-H036) probe for SJ-H (6 pieces) probe for SJ-HV (4 pieces) probe for SJ-HC (4 pieces) box for SJ-H Series
Electrode cleaning kit Replacement filter for Electrode probe replacement Electrode cleaning kit Replacement filter for Standard intermediary support Standard end unit (fixed)
for SJ-H Series electrode cleaning kit (10 pieces) kit for SJ-H Series 2 for SJ-H Series electrode cleaning kit 2 (10 pieces) bracket (fixed) for SJ-H Series Series
Wide angle booster Wide angle booster Straight air booster Straight air booster Air booster sealing Air booster end unit Air booster supplemental
starter unit expansion unit starter unit expansion unit expansion unit support bracket
Laminar flow assist Laminar flow assist Probe replacement kit for
part start unit part expansion unit laminar flow assist part
36
Dimensions
SJ-F2500/F5500
(16.3)
(Cable extension
50.5
115.3
length) (10.3)
SJ-F5500 Series Removable front cover Removable filter
638.8 50 133 50 114.5
69 28
(14)
582 (12.5)
OP-87150
500
300
5.6 75
8-M 4 100 5.6 9.6
R200
5°
100
75 5.6
9.6 t=2.0
100 Capable of 360° rotation
10° 300
500 2-ø8.1
(Both sides)
592
133 18
113 Capable of
13 335° rotation
116
126.6
OPTIONS
Electrode unit for replacement Electrode unit for replacement AC adapter for SJ-F2500/F2000* L-shaped mounting bracket for L-shaped mounting bracket for
for SJ-F2000 Series for SJ-F5000 Series SJ-F2000 Series SJ-F5000 Series
U-shaped mounting bracket for U-shaped mounting bracket for Rubber stoppers for DC input cable for
SJ-F2000 Series SJ-F5000 Series SJ-F2000/F5000 Series SJ-F2500/F2000
* For details of the AC cable, contact the KEYENCE sales office in your district.
37
SJ-F030/F035
Unit : mm
45 158 45
211.7 87 11.7
64.5
140.7
1 120 (50)
(Mounting part: 121)
SJ-F030 61.5 5.5
103.7 SJ-F035 66.5
(2)
4.5 20 25
ø15 30º
ø15 ø4.5 R7.5
R22.5
(62)
125.6
4.5
41.7
(2)
Options
Mounting bracket C Controller-to-blower Blower-to-blower
extension cable extension cable
SJ-C2J SJ-C02P
Male/female ends (2 m) Male/female ends (0.2 m)
SJ-C5J SJ-C2P
Male/female ends (5 m) Male/female ends (2 m)
SJ-C10J SJ-C5P
Male/female ends (10 m) Male/male ends (5 m)
SJ-C10P
OP-78478 Male/male ends (10 m)
* To connect an extension cable other than 2 m, 5 m or 10 m types between blowers, combine the blower-to-blower extension cable (SJ-CxP) and the controller-to-blower extension cable (SJ-CxJ).
SJ-F031/F036
Unit : mm
30°
Static elimination blower Static elimination blower OP-84374 Mounting bracket D (included in SJ-F031/F036)
mounting bracket 2.3 26
121
106
R35 4.5
2 x 2-M4 depth: 6
(121.6) 80° 50 70
(5) 35 138
110
126 12.2 3-M6
11.7
158 45
181 Options
87
110 64.5
Mounting bracket D I/O cable
1 (50)
120 SJ-F031 61.5
(Mounting part: 121) SJ-F036 66.5 5.5
OP-84374 SJ-FC5
38
Dimensions
SJ-F300/F031/F036
Unit : mm
80° 50 70
40
3-M6 30º OP-78476 OP-78477
35 5.5 t=3.2
4.5
Electrode probe unit
121 2.3 26 for replacement AC adaptor *
40º
98.5 83
138
4 110
ø11 OP-51407 SJ-U2
17 60
For powering a single blower
only
* For details of the AC cable,
contact the KEYENCE sales
office in your district.
SJ-F100
Unit : mm
22
35 3
ø6 Cable length 300 SJ-C3 ø6 Cable length 3 m
Minimum bend radius: 15 49 51
ø15.5 ø15
120 ø 15
(Mounting part: 121)
Options
Electrode probe unit AC adaptor * Extension cable Mounting bracket A Mounting bracket B
for replacement (Desktop type) (Hanging type)
39
SJ-M200 Series
Unit : mm
SJ-M200
50 76
Mounting bracket Mounting bracket Mounting bracket Electric shock
46 (for SJ-M010) (for SJ-M020: Upper) (for SJ-M020: Lower) preventive cap
11.8 2.6 28.2 (Note) Slot dimensions 30 60.5
10 20 2-ø3.4 20
120 36
2.6
t=0.8
9.8
14 2-ø3.4 2-slot (Note) 3.4 10 25
(Mounting hole) 11.5
9 18 t=0.8 3
ø17
32 3.2 3.2 10.5 10.2 M3 set screw
5
70
SJ-M010 (2.0M) SJ-M020 (2.0M), (1.2M), (0.6M) SJ-M020G (2.0M), (1.2M), (0.6M)
191 24 191 60
18 60 181
181 24 24 M12×P1
ø15 ø15
3 35 + 3 35
51
2-ø4.4 (Through hole) (Bracket ø10 0.5 51 2-ø4.4 (Through hole) (Bracket ø10
ø9, Cable length: 2 m mounting range) 0 ø9, Cable length: 2 m,1.2 m,0.6 m mounting range) ø12
ø6, Cable length: 300 Minimum bend radius: 50 58 ø6, Cable length: 300 Minimum bend radius: 50 58
Minimum bend radius: 15 Minimum bend radius: 15
34 34 Rc 1/8
2.5 Rc 1/8 2.5 (Taper :
(Taper: female screw) female screw)
34.5 34.5
22 22
SJ-MS1 Straight flat nozzle SJ-MS2 Straight flat diffusion nozzle SJ-ML L-type nozzle
14.3
ø15.9 10.1
11.3
14.3
SJ-M020 M12×P1
SJ-M020G Rc1/8
SJ-M020 6.5
(51.9) SJ-M020 (60.7) 75 SJ-M020G 20
33.7 28.7 SJ-M020G 33.7
75 28.7 72 13 6.5
Assembly drawing 31
ø13 Assembly drawing
ø13
M12×P1 Assembly drawing
M12×P1
SJ-MS3 Straight threaded tube nozzle SJ-MS4 Straight 2-way branch SJ-ML1 L-type flat nozzle
threaded tube nozzle ø6 tube
ø6 tube
14.3
11
ø15.9
SJ-M020 11.3
11
SJ-M020G
SJ-M020 (74.3) M12×P1 (38.2)
6.5
75 SJ-M020G 20
(52.5) SJ-M020
33.7 28.7 33.7 28.7 SJ-M020G
75 72 13 6.5
Assembly drawing 31
ø13 Assembly drawing ø13
Assembly drawing
M12×P1 M12×P1
SJ-ML2 L-type flat diffusion nozzle SJ-ML3 L-type threaded tube nozzle SJ-ML4 L-type 2-way branch
threaded tube nozzle
14.3 ø6 tube
ø6 tube
SJ-M020
SJ-M020 SJ-M020G SJ-M020
SJ-M020G M12×P1 (38.8)
10.1 SJ-M020G (60.6)
M12×P1 (47) 6.5
6.5 20 M12×P1
20 6.5
20
72 13 6.5
72 13 6.5 Assembly drawing 31 72 13 6.5
Assembly drawing 31 Assembly drawing 31
40
Dimensions
SJ-M300 Series
Unit : mm
SJ-M030/M030C/M030G/M030V/M030VC
5.5
Front mounting (Note) Slot dimensions 2-slot
5
18
46 (SJ-M030/M030C/M030G) To the power 26.5 28
41 (SJ-M030V/M030VC) supply 4
18
220 11
200
27.5
17.5
29 26 To the power
supply 4 29
43 80 (P = 40 × 2)
Side mounting
To the power
28.5 (SJ-M030/M030C/M030G) supply
23.5 (SJ-M030V/M030VC)
Rc 1/8
17.5
To the power
(17.5) supply
SJ-M070/M070C/M070G/M070V/M070VC
Front mounting 5.5
380
360
29 26 To the power
supply
43 240 (P = 40 × 6)
Side mounting
To the power
28.5 (SJ-M070/M070C/M070G) supply
23.5 (SJ-M070V/M070VC)
Rc 1/8
17.5
To the power
(17.5) supply
To the head
SJ-M300 SJ-M030/M070
50 76 30
24 191
181 24
46
2.5
ø15
120 36 3
51 ø10, Cable length: 800
2-ø4.4 (Through hole)
ø6, Cable length: 300 Minimum bend radius: 30
Minimum bend radius: 15
32
5 35
70
11.5 5 5 8.5
131
41
SJ-M400
Unit : mm
34 40 Options
Extension cable AC adaptor * Electrode unit for
SJ-M040
172
42
Dimensions
SK-H050
SK-H050
Unit : mm
When ioniser
monitoring unit
is attached
62.8 63.7
183.3 197.8
47.7 31.6
SK-050/1000/1050
ø4.7
SK-050 SK-1000/1050 Cable length: 2 m
28.3
18.5
8.9
7
16
103.5 ø4.8
78.8 ax.
°m
.5
135
ø3
3
2-
21.5
Ground wire
for ion monitoring unit
OP-87927
43
Since 1974, KEYENCE has steadily
Customer
Direct Support
All From KEYENCE
Comprehensive
Support On-Site Product Demonstrations
Application Sample Testing
Direct Phone & On-Site Support
After-Sales
Selection Adoption Support
Same-Day Shipping
With most items in stock, received orders can ship the same day, reducing your
overhead costs and losses due to work stoppage.
www.keyence.com
Copyright (c) 2018 KEYENCE CORPORATION. All rights reserved. Sjgeneralcatalog-WW-C-GB 1078-1 600Q70