Professional Documents
Culture Documents
Manuel BioliteNet
Manuel BioliteNet
com
BioLite NET
Innovative Fingerprint Terminal
User Guide
User guide((ver
ver 1.0 )1.0)
Product Contents
Basic Contents
Product Contents
E-ring
BioLite NET
Request
q To
Exit
10
*Enable termination
((optional,
ti l see Note1)
N t 1) TRX GND TRX GND *E bl ttermination
*Enable i ti
TRX+ TRX+ ... (optional, see Note1)
TRX- TRX-
Important Notes
1. For bus termination, only the devices at both ends of the bus should be terminated.
T enable
To bl ttermination
i ti on th the RS232
RS232-485
485 converter,
t refer
f tot the t ’ manual.l
th converter’s
2. The stubs should be as short as practical
11
12
RTE RTE
Switch 0 Switch 0
switch switch
Internal Secure
Relay RS485 Relay 0
I/O
Door 0 Door 1
Door Door
Switch 1 Switch 1
Status Status
13
item content
Model (
BioLite-NET(BLN-OC) )
Transmit 13.56MHz
Receive 13.56MHz
Modulation ASK
Communication Single propagation
Channel Single channel
Mode 1:1
15
RTE
Switch 0
switch
Network hub
Ethernet RS485
Secure
Relay 0
I/O
Door 1
Door
Switch 1
Status
If you select Network on initial UI menu, Network Setup menus appear on the display.
If you select TCP/IP on network menu, following menus appear on the display.
LAN TYPE z Setting : Disable/Ethernet
z Used when connected to PC via Ethernet using RJ45 connector on the rear of the device.
z Setting : 1/4/8/16
Max conn
z Max number of clients that can access the device at the same time.
IP Address, gateway, subnet z Without using DHCP, IP address, gateway, and subnet need to be entered manually. Inquire
necessary settings to network administrator.
16
19
20
21