Professional Documents
Culture Documents
Session 2009-2
Session 2009-2
– 4بطارية لديها قوة دافعة 12فولط ومقاومة داخلية 0،5أوم تغذي محل مقاوم ذات مقاومة 11،5أوم .شدة التيار يف الدائرة تكون:
ج – 12أمبري ب – 1أمبري أ – 6أمبري
– 5الطاقة الكهربائية املمتصة بواسطة االدوات الكهربائية حتسب استنادا" اىل املعادلة التالية:
جW=UxI- بW=IxRxt- أW=Pxt-
– IIثالث مسائل إلزامية ( 5عالمات لكل مسألة)
حمرك كهربائي احادي الطور يعمل بالتيار املتناوب لديه قدرة مستعملة iبقيمة 1570iواط ". "1570W ّ –1
عند التشغيل االعتيادي ،يسحب احملرك قدرة بقيمة 1760 iواط " "W 1760مع تيار بشدة 10أمبري " "A 10حتت جهد 220فولط
" ."U = 220 Vاحسب:
– 1القدرة الظاهرية.
– 2عامل القدرة.
– 3القدرة املفاعليةi.
– 4جمموع الفقود يف القدرة.
محرك.
– 5مردود ال ّ
– 2ملف لديه مقاومة 5أوم ( )R = 5وحماثة ذاتية 0،016هنري( . )L = 0,016Hيتغذى جبهد 12فولط،
50هرتز ( .)U = 12V; 50 Hzاحسب:
– 1مفاعلة امللف.
– 2معاوقة امللف.
– 3عامل القدرة للملف (. )cos
– 4شدة التيار.
– 5القدرة الفاعلة.
مولد للتيار الكهربائي املستمر ،ذو قطبني ،بإثارة متوازية ،يعمل بسرعة دوران 1200دورة يف الدقيقة .يغذي املولد محل كهربائي مقاومته 12أوم حتت
ّ –3
جهد بقيمة 120فولط .مقاومة العضو الدوار 0.6أوم ،ومقاومة اإلثارة املتوازية 80أوم .احسب:
– 1شدة التيار املسحوبة بواسطة احلمل.
– 2شدة تيار اإلثارة.
– 3شدة التيار يف العضو الدوار.
– 4القوة الدافعة الكهربائية.
– 5املردود الكهربائي.
الجمهورية اللبنانية
االمتحانات الرسمية لشهادة التكميلية المهنية وزارة التربية والتعليم العالي
الثانية2009 لدورة عام للتعليم المهني والتقني#المديرية العامة
)8( :المعدل )62204( كهربائي ماكينات-)62104( كهربائي أبنية:االختصاص والرمز
ساعة ونصف:المدة الكهرباء:الـمـ ــادة
. آلة حاسبة غري مربجمة: المستندات المسموح بـها
4 – Une batterie, de force électromotrice 12V et de résistance interne 0,5, alimente un charge
résistive de résistance 11,5. L'intensité du courant dans le circuit est:
Réponses: a) I = 6A b) I = 1A c) I = 12A
5 – L'énergie électrique absorbée par les équipements électriques est donnée par:
Réponses: a) W = P x t b) W = I x R x t c) W = U x I
II – Résoudre les trois problèmes obligatoires suivants: (5 points / chacun)
1 – Un moteur à courant alternatif monophasé de puissance utile 1570W.
En fonctionnement nominal, il absorbe une puissance de 1760W avec une intensité du courant de
10 A sous une tension de
220 V. Calculer:
1) La puissance apparente.
2) Le facteur de puissance.
3) La puissance réactive.
4) La somme des pertes de puissances.
5) Le rendement du moteur.
2 – Une bobine a une résistance de 5 et une inductance de 0,016 henry. Elle est alimentée par une
tension de 12V, 50 Hz. Calculer:
1) La réactance de la bobine.
2) L'impédance de la bobine.
3) Le facteur de puissance de la bobine cos().
4) L'intensité du courant.
5) La puissance active.
3 – Une dynamo, bipolaire, à excitation shunt est tourné à une vitesse de 1200 tr/mn.
Elle alimente une charge électrique de résistance R = 12 sous une tension U = 120 V.
La résistance de l’induit est 0,6 et la résistance de l’inducteur 80. Calculer
1) L'intensité du courant absorbée par la charge
2) L'intensité du courant d'excitation.
3) L'intensité du courant dans l'induit.
4) La force électromotrice.
5) Le rendement électrique.
الجمهورية اللبنانية
االمتحانات الرسمية لشهادة التكميلية المهنية وزارة التربية والتعليم العالي
الثانية2009 لدورة عام للتعليم المهني والتقني#المديرية العامة
)8( :المعدل )62204( كهربائي ماكينات-)62104( كهربائي أبنية:االختصاص والرمز
ساعة ونصف:المدة الكهرباء:الـمـ ــادة
. آلة حاسبة غري مربجمة: المستندات المسموح بـها
4 – A battery, of electromotive force 12V and internal resistance 0,5, feeds a resistive load of
resistance R = 11,5. The intensity of the current in the circuit is:
Answers: a) I = 6A b) I = 1A c) I = 12A
5 – The electric energy absorbed by the electrical appliances is given by:
Answers: a) W = P x t b) W = I x R x t c) W = U x I
II – Solve the following obligatory problems: (5 points / each)
1 – A single phase alternating current motor of useful power 1570W.
In nominal functioning, it absorbs a power of 1760W with a current of intensity10 A under a
voltage of 220V. Calculate:
1) The apparent power.
2) The power factor.
3) The reactive power.
4) The sum of the power losses.
5) The efficiency of the motor.
2 – A coil of a resistance 5 and an inductance of 0,016 henry is supplied by a voltage of 12V, 50 Hz.
Calculate:
1) The reactance of the coil.
2) The impedance of the coil.
3) The power factor of the coil cos().
4) The intensity of the current.
5) The active power Dc shunt generator.
3 – A bipolar is rotated at a speed of 1200 r.p.m.
It feeds an electric load of resistance R = 12 under a voltage U = 120 V.
The armature resistance is 0,6 and the field resistance is 80. Calculate
1) The intensity of the current absorbed by the load.
2) The intensity of the excitation current.
3) The intensity of the current in the armature.
4) The electromotive force.
5) The electrical efficiency.