Professional Documents
Culture Documents
Jak Zrobić Włosy Amigurumi
Jak Zrobić Włosy Amigurumi
q=node/83
Making fringe
Most of my dolls have hair made of a yarn fringe, which I find to be faster and
a little bit easier than attaching yarn hair one strand at a time. In these
examples, I use a hairpin lace loom, which is easy enough to find in most craft
stores, (something like this:
Susan Bates Adjustable Aluminum Hairpin Lace Loom
should work)
However, if you can't find one or don't feel the need, a longish piece of
cardboard or wood about 2 1/4 inches wide will work too.
(Note: for this example, I'm using a contrasting piece of yarn in place of string
to hold the edge of the fringe together, in order to make the steps more visible.
Normally, I would use a piece of matching sewing thread, which is easier to
hide when attaching the hair to the doll's head.)
Step 1: Start by making a ch 1 with the thread (or, the contrasting yarn in this
example)
Step 2: Take the yarn and wrap it around the back and back around to the
front
Step 3: Hold the loop on the hook to the front, and pull the thread to the back.
Make a ch 1 with the thread (or, the contrasting yarn in this example). This
should result in a ch 1 that is formed *around* the yarn.
Step 4: Repeat steps 2 and 3 until you have enough fringe to cover the doll's
head.
Notice that each chain stitch grabs one loops of yarn. Also notice that, if you pull
on an individual piece of the fringe yarn at this point, it can slide under the chain
stitch holding it and make the size of your loops unequal. If you've worked a
relatively tight chain stitch to hold it together, the fringe should hold together
reasonably well-- at least, long enough for you to better tack it into place on your
doll.
Note: Normally, I would use thread to hold the fringe together-- the fringe
would look more like this:
Attaching Hair: Corporate Zombie
To make to the hair, you'll basically be filling in the part of the head to be
covered in a zig-zag pattern.
Since the corporate zombie's hair is going to have a part down one side, I find
that it's best to attach the hair on one side all going one way, and the hair on
the other side going the other.