Professional Documents
Culture Documents
BXV 80063 8CF 4
BXV 80063 8CF 4
160 20
Fore/Aft 1022 N 230 lbs
150 30
Side 469 N 105 lbs
140 40
-160 -20
Electrical specifications -170 -10
Frequency Range 806-900 MHz 180 35 30 25 20 15 10 5 0
3) 160 20
Connector(s) NE, E-DIN Diagram: As viewed from
150 30
3 ports / center the back
140 40
1) 130 50
VSWR ≤1.4:1 120 60
110
100 80
70 Amphenol Antel’s
90
Transmit Polarization Vertical Exclusive 3T (True
Receive Polarization Slant ± 45° Vertical Transmission Line
1)
Technology)
Isolation Between Ports Antenna Design:
±45°/±45° < -30 dB Radiation patterns for all antennas
±45°/Vertical < -35 dB
are measured with the antenna • Watercut brass feedline assembly for
1)
Gain 13 dBd mounted on a fiberglass pole. consistent performance.
2)
Power Rating 500 W • Unique feedline design eliminates the
1)
Mounting on a metal pole will need for conventional solder joints in the
Half Power Angle
typically improve the Front-to- signal path.
H-Plane 63° Back Ratio. • A non-collinear system with access to
E-Plane 15° every radiating element for broad
1)
bandwidth and superior performance.
Electrical Downtilt 4°
1)
• Air as insulation for virtually no internal
Null Fill 5% signal loss.
Lightning Protection Direct Ground This Amphenol Antel antenna is under a five-
year limited warranty for repair or replacement.
Antenna available with center-fed
Patented Dipole Design: U.S. Patent No. 6,608,600 B2 connectors only.
1)
2)
Typical Values CF Denotes a Center-Fed
Power Rating limited by connector only.
3)
NE indicates an elongated N Connector. Connector.
E-DIN indicates an elongated DIN Connector.
4)
The antenna weight listed above does not include the bracket weight.