Professional Documents
Culture Documents
TSURUMI Pumps Catalogue
TSURUMI Pumps Catalogue
Global Leader
TSURUMI PUMPS
Impeller Features
Vortex/Semi Vortex Impeller Channel Impeller
This impeller allows passage of An impeller used in centrifugal
large or stringy solids carried in the pumps which allows passage of
water. It accelerates the water solids in the pumped liquid.
causing a vortex that assists the
Medium flows, medium heads smooth transit of the solids in
suspension. Large solids
Global Leader
CONTENTS
Who is Tsurumi ...................................................... ........................................................................................ 2 Contractor pumps
Impeller features .................................................... ........................................................................................ 2
Key features on Tsurumi Submersible Pumps ........ ........................................................................................ 4
1. Contractor Pumps
LB p6 HS p6 HSD p6
1.1 Single Phase
1.1.1 LB series .......................... (Hire special) ................................................................... 5
1.1.2 HS / HSZ / HSD series ...... (Portable sand pumps) .............................................. 6/7
1.1.3 LSC .................................. (Puddle suckers) ............................................................. 8
1.1.4 NK series ......................... (High head) ..................................................................... 9
LSC p8 NK p9
1.2 Three Phase (Dewatering & Slurry)
1.2.1 KTV / KTVE series ............ (2 pole, light but tough) .......................................... 10/11
1.2.2 KTZ / KTZE / KTD series ... (2 pole, cast iron, dirty water & slurry).................... 12/13
1.2.3 LH-W & LH series ............ (2 pole, high head & high flow) .............................. 14/15
1.2.4 KRS series ........................ (4 pole, high flow, dirty water & slurry) .................. 16/17
KTV
1.2.5 NKZ series ........................ (4 pole, sand & mud) .................................................... 18 KTV p10 KTVE p10 SLURRY p10
1.2.6 GPN series ....................... (4 & 6 pole, sand & slurry) ............................................ 19
NEW 1.2.7 GSZ & GSD series ............ (4 & 6 pole, dirty water & slurry) ............................ 20/21
NEW 1.2.8 1000v Mine pumps ......... ...................................................................................... 22
NEW 1.2.9 Seawater kits .................. ...................................................................................... 22 KTD
KTZ p12 KTZE p12 SLURRY p12
Global Leader
KEY FEATURES
5 times higher corrosion, wear & heat resistance than tungsten carbide …
5 times the life!
Check individual data sheets for full details on materials of constructionFull data sheets with performance curves available for application selection
CONTRACTOR PUMPS
casing. These pumps are the top selling Tsurumi
submersibles in North America.
The semi-vortex impeller maintains pump performance
even when worn. The discharge port can be set vertically or
horizontally to minimise folding or bending of the
connected hose.
Discharge port 50mm (80mm option)
Top discharge … slim line design means pump can fit
into a 200mm pipe
0 100 200 300
Semi vortex/open type impeller (Urethane rubber) Capacity (L/min)
LB manual version Single phase
2 pole motors from 0.48 to 1.5 kW
Multidirectional hose coupling
Flow thru design cools pump
Number 1 rental pump in USA
Oil resistant cable
The shaft mounted agitator prevents "Air Lock" and stirs the
mixture allowing the sediment to be removed.
CONTRACTOR PUMPS
Do not operate pump below C.W.L
(continuous running water level)
5 great features ... 5 times the life!
Standard in every Tsurumi HS (HSD) submersible
Anti-wicking cable entry
SiC mech seal … 5 times higher corrosion, wear &
heat resistance than tungsten carbide
DIMENSIONS (MM)
Mech seals protected in oil chamber with patented
Model d A A1 B B1 D H W1 oil lifter
HS2.4S 50 240 207 158 84 185 328 90
HS2.75S 50 285 233 217 109 184 388 90 Thermal motor protection
V-ring protector for mech seal
See data sheets for full specifications
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length List
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m Price
50 HS2.4S TUC-HS2.4SP 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 $395
50 HS2.75S TUC-HS2.75SP 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 $507
AUTO VERSION … HSZ
50 HSZ2.4S TUC-HSZ2.4SP 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 $448
50 HSZ2.75S TUC-HSZ2.75SP 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 $550
SLURRY VERSION .. HSD
50 HSD2.55S TUC-HSD2.55SP 0.55 7.2 single 13.2 220 capacitor 15.0 10 20 10 $592
Used extensively in batch plants Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 7
March 2017 | Issue 2
SINGLE PHASE
Global Leader PUDDLE SUCKERS HIRE/PLUMBERS
1.1.3 LSC RESIDUE PUMP
The LSC pump is a portable, single-phase residue
dewatering pump. Tsurumi’s unique sealing device makes
the pump capable of pumping down to floor level.
The rubber-lined base plate prevents scratching to floor
CONTRACTOR PUMPS
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m List Price
25 LSC1.4S TUC-LSC1.4SP 0.48 6.2 single 11 170 capacitor 12 6 20 5 $487
25 LSP1.4S TUC-LSP1.4SP 0.48 6.2 Single 7 55 Capacitor 16.5 6 20 5 $1,197
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 8 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
CONTRACTOR PUMPS
even when it operates at low water levels.
Semi-vortex pump design is adopted for maximum
durability and maintaining pump performance.
The pump has a built-in starting capacitor.
Discharge port 80mm
Top discharge … slimline design means pump can
fit into narrow locations
Semi-vortex impeller (ductile cast iron)
Single phase, 2 pole 2.2kW motor
Side flow design to cool motor
Internal starting capacitor
Simple to disassemble
Oil resistant cable
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m List Price
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 9
March 2017 | Issue 2
3 PHASE , 2 POLE,
Global Leader LIGHTWEIGHT & TOUGH HIRE/CONSTRUCTION
1.2.1 KTV SERIES
DIRTY WATER … KTV
The KTV series are compact, three-phase dewatering
pumps. Made from aluminium and synthetic rubber, these
are the lightest in Tsurumi’s 3-phase, dewatering pump
CONTRACTOR PUMPS
range.
The semi-vortex impeller minimizes blockages. The strainer
is easily removed for access during maintenance.
Top discharge port 50mm - 80mm
Side flow design cools motor at low water levels
Semi-vortex impeller
(Synthetic rubber coated ductile cast iron)
Three phase, 2 pole motors from 0.75 to 5.5kW
0 500 1000
Lightweight construction, high strength aluminium Capacity (L/min)
AUTO VERSION
The KTVE series are equipped with electrode control
Level sensors for automatic operation.
control Pump operation starts when the water level rises and
electrode
contacts the electrode. A timer function eliminates
excessive activations caused by agitated water. The pump
will operate for a further minute after the water-electrode
contact is lost. 0 500 1000
The electrode relay eliminates dry-running, reduces power Capacity (L/min)
consumption and extends operating life.
KTVE automatic version
SLURRY VERSION
With all the features of the standard KTV series, these
lightweight, portable slurry pumps are equipped with a
cast iron agitators that ensure smooth suction of the
settled matters.
The impeller is made of high-chromium cast iron for extra
durability.
Discharge port 50 - 80mm
Top discharge makes pump suitable for narrow spaces
Semi vortex impeller
(Chromium - durable & corrosion resistant)
Pumped water cools motor so pump can operate at low
0 400 800
water levels Capacity (L/min)
Rubber suction cover for abrasion resistance
KTV slurry version Pumping sediments in For online demo search Tsurumi KTV pump
wastewater treatment plantFull data sheets with performanceor click You
curves Tube image
available for application selection
All prices exclude gst, ex Sydney warehouse
Page 10 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
3 PHASE , 2 POLE,
Global Leader LIGHTWEIGHT & TOUGH HIRE/CONSTRUCTION
1.2.1 KTV SERIES CONTINUED
STANDARD AUTO SLURRY
CONTRACTOR PUMPS
DIMENSIONS (MM) Do not operate pump below C.W.L
Model d A A1 B B1 D H W1 (continuous running water level)
KTV2-8 50 200 155 353 281 200 369 65
KTV2-15 50 240 187 392 310 240 396 80 5 great features ... 5 times the life!
KTV2-22 50 240 187 412 330 240 416 80 Standard in every Tsurumi KTV submersible
KTV2-37H 50 285 211 510 387 285 510 90
KTV2-37 80 285 211 510 387 285 510 90 Anti-wicking cable entry
KTV3-55 80 300 229 545 422 300 545 90 SiC mech seal … 5 times higher corrosion,
AUTO VERSION wear & heat resistance than tungsten carbide
KTVE2.75 50 200 155 401 329 200 417 234 Mech seals protected in oil chamber with
KTVE21.5 50 240 187 462 380 240 426 266 patented oil lifter
KTVE22.2 50 240 187 462 380 240 426 266
KTVE33.7 80 285 210 585 462 285 585 327
Thermal motor protection
V-ring protector for mech seal
SLURRY VERSION See data sheets for full specifications
KTV2-50 50 250 192 450 368 250 454 120
KTV2-80 80 295 211 550 427 295 550 130
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m List Price
50 KTV2-8 TUC-KTV2-8 0.75 1.8 3-phase 15 320 d.o.l. 11.5 6 20 5 $1,301
50 KTV2-15 TUC-KTV2-15 1.5 3.3 3-phase 20 420 d.o.l. 20.5 8.5 50 8 $2,022
50 KTV2-22 TUC-KTV2-22 2.2 4.3 3-phase 24 525 d.o.l. 23.0 8.5 50 8 $2,222
50 KTV2-37H TUC-KTV2-37H 3.7 7.4 3-phase 33.8 500 d.o.l. 35.0 8.5 50 8 $3,119
80 KTV2-37 TUC-KTV2-37 3.7 7.4 3-phase 26.5 830 d.o.l. 36.0 8.5 50 8 $3,119
80 KTV3-55 TUC-KTV3-55 5.5 11 3-phase 35 980 d.o.l. 46.5 8.5 50 8 $3,676
AUTO VERSION
50 KTVE2.75 TUC-KTVE2.75 0.75 1.8 3-phase 15 320 d.o.l. 12.7 6 20 5 $2,139
50 KTVE21.5 TUC-KTVE21.5 1.5 3.3 3-phase 20 420 d.o.l. 21.5 8.5 50 8 $2,884
50 KTVE22.2 TUC-KTVE22.2 2.2 4.3 3-phase 24 525 d.o.l. 24.5 8.5 50 8 $3,108
80 KTVE33.7 TUC-KTVE33.7 3.7 7.4 3-phase 26.5 830 d.o.l. 39.5 8.5 50 8 $4,517
SLURRY VERSION
50 KTV2-50 TUC-KTV2-50 2 3.8 3-phase 20 420 d.o.l. 25.0 10 50 8 $2,769
80 KTV2-80 TUC-KTV2-80 3 6.1 3-phase 22.5 720 d.o.l. 38.0 10 50 8 $3,350
1,000 volt option available … p22 Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 11
March 2017 | Issue 2
The KTD series are cast iron, heavy duty slurry pumps based
on the KTZ series. An agitator assists the smooth of suction
solids in suspension.
Discharge port 50 - 80mm
Top discharge … Slimline design means pump can fit into
narrow locations
Semi open type impeller
Hi chrome iron impeller & agitator, for durability &
corrosion resistance
Three phase, 2 pole motors from 2 to 3kW
Applications Standard Accessories
Draining or transferring Hose coupling (1 pc) 0 400 800
bentonite slurry Hose band (1 pc) Capacity (L/min)
Draining, transferring, or
mixing slurry
Draining slurry mixed water
KTD slurry version Concrete batch plants Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 12 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
CONTRACTOR PUMPS
KTZ21.5 50 235 173 509 401 216 478 120
KTZ31.5 80 235 173 509 401 216 478 120
KTZ22.2 50 235 173 529 421 216 498 120
KTZ32.2 80 235 173 529 421 216 498 120
KTZ23.7 50 283 208 615 492 252 625 150
KTZ33.7 80 283 208 615 492 252 625 150
KTZ43.7 100 283 208 630 492 252 625 150
KTZ35.5 80 306 218 671 548 259 688 150
KTZ45.5 100 306 218 686 548 259 688 150
KTZ47.5 100 330 240 764 626 314 687 190
Do not operate pump
KTZ67.5 150 330 240 799 626 314 687 190 5 great features ... 5 times the life! below C.W.L
Standard in every Tsurumi KTZ submersible (continuous running
KTZ411 100 373 260 806 645 350 740 190 water level)
KTZ611 150 373 260 826 645 350 740 190
Anti-wicking cable entry Mech seals protected in oil
chamber with patented oil lifter
AUTO VERSION Twin dual SiC mech seals …
KTZE21.5 50 270 173 235 623 216 628 345 5 times higher corrosion, Thermal motor protection
KTZE22.2 50 270 173 235 643 216 648 355 wear & heat resistance than
tungsten carbide
V-ring protector for mech seal
KTZE23.7 50 342 213 283 755 252 717 435
KTZE31.5 80 276 173 235 623 216 628 345 Hose tails Angled Hose & BSP tails
(for non multidirectional pumps)… self fit (multidirectional pumps, version 53)… self fit
KTZE32.2 80 276 173 235 643 216 648 355 Models suited Hose tail List Models suited Hose tail List BSP tail List
KTZE33.7 80 347 213 283 755 252 717 435 KTZ22.1, KTZ22.2 TS-03211117 $35 KTZ22.1, KTZ22.2 TS-03200078 $35 TS-03200085 $112
2” 2”
KTZE43.7 100 367 213 283 770 252 717 435 KTZ23.7 TS-03215119 $67 KTZ23.7 TS-03200082 $115 TS-03200089 $262
KTZ31.5, KTZ32.2 TS-03211612 $56 KTZ31.5, KTZ32.2 TS-03200079 $117 TS-03200087 $292
3” 3”
SLURRY VERSION KTZ33.7, KTZ35.5 TS-03211827 $63 KTZ33.7, KTZ35.5 TS-03200083 $119 TS-03200091 $315
KTZ43.7, KTZ45.5 TS-03212729 $ 67 KTZ43.7, KTZ45.5 TS-03200080 $131 TS-03200093 $331
KTD22.0 50 235 173 550 442 221 519 140 4” 4”
KTZ411 TS-03229516 $170 KTZ411 TS-03200098 $331 TS-03200099 $331
KTD33.0 80 297 222 644 521 266 654 160
KTZ67.5 TS-03215210 $196 KTZ67.5 TS-03200095 $212 TS-03200096 $644
6” 6”
KTZ611 TS-03229617 $248 KTZ611 TS-03200101 $395 TS-03200102 $395
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length List
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m Price
50 KTZ21.5 TUC-KTZ21.5 1.5 3.5 3-phase 21.5 430 d.o.l. 30 8.5 50 8 $1,604
80 KTZ31.5 TUC-KTZ31.5 1.5 3.5 3-phase 14.4 670 d.o.l. 30 8.5 50 8 $1,604
50 KTZ22.2 TUC-KTZ22.2 2.2 5 3-phase 26 500 d.o.l. 34 8.5 50 8 $1,714
80 KTZ32.2 TUC-KTZ32.2 2.2 5 3-phase 20.4 800 d.o.l. 34 8.5 50 8 $1,714
50 KTZ23.7 TUC-KTZ23.7 3.7 7.7 3-phase 36.5 450 d.o.l. 60 8.5 50 8 $2,751
80 KTZ33.7 TUC-KTZ33.7 3.7 7.7 3-phase 29 900 d.o.l. 60 8.5 50 8 $2,751
100 KTZ43.7 TUC-KTZ43.7 3.7 7.7 3-phase 18 1,440 d.o.l. 60 8.5 50 8 $2,751
80 KTZ35.5 TUC-KTZ35.5 5.5 11.4 3-phase 32 1,100 d.o.l. 74 8.5 50 8 $3,960
100 KTZ45.5 TUC-KTZ45.5 5.5 11.4 3-phase 22.5 1,750 d.o.l. 74 8.5 50 8 $3,960
100 KTZ47.5 TUC-KTZ47.5 7.5 15 3-phase 40 1,400 d.o.l. 101 12 50 8 $5,343
150 KTZ67.5 TUC-KTZ67.5 7.5 15 3-phase 31 2,040 d.o.l. 100 20 50 8 $5,530
100 KTZ411 TUC-KTZ411 11 22 3-phase 48.5 1,440 d.o.l. 130 12 50 8 $6,595
150 KTZ611 TUC-KTZ611 11 22 3-phase 32.5 2,440 d.o.l. 131 20 50 8 $6,595
AUTO VERSION
50 KTZE21.5 TUC-KTZE21.5 1.5 3.5 3-phase 21 450 d.o.l. 39 8.5 50 8 $2,036
50 KTZE22.2 TUC-KTZE22.2 2.2 5.0 3-phase 26 500 d.o.l. 41 8.5 50 8 $2,144
50 KTZE23.7 TUC-KTZE23.7 3.7 7.5 3-phase 37 450 d.o.l. 69 8.5 50 8 $3,420
80 KTZE31.5 TUC-KTZE31.5 1.5 3.5 3-phase 14 680 d.o.l. 38 8.5 50 8 $2,036
80 KTZE32.2 TUC-KTZE32.2 2.2 5.0 3-phase 20 800 d.o.l. 40 8.5 50 8 $2,144
80 KTZE33.7 TUC-KTZE33.7 3.7 7.5 3-phase 29 900 d.o.l. 69 8.5 50 8 $3,420
100 KTZE43.7 TUC-KTZE43.7 3.7 7.5 3-phase 18 1420 d.o.l. 69 8.5 50 8 $3,420
SLURRY VERSION … KTD SERIES
50 KTD22.0 TUC-KTD22.0 2 4.5 3 phase 20 500 d.o.l. 38 10 8 $2,699
80 KTD33.0 TUC-KTD33.0 3 6.5 3 phase 22 800 d.o.l. 65 10 8 $3,163
Tsurumi seawater kit available … p 22 Full data
1,000 volt option sheets….with
available p22performance curves available for
Used extensively in application
batch plantsselection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 13
March 2017 | Issue 2
CONTRACTOR PUMPS
LH23.0W 50 630 185 200
LH25.5W 50 750 240 170
LH311W 80 1030 270 200
LH322W 80 1235 330 300
LH430W 100 1375 365 300
LH4110W 100 1826 616 380
0 5,000 10,000
Capacity (L/min)
LOW HEAD / HIGH FLOW VERSION
This version of the KRS series are equipped with highly
efficient motors that minimize power consumption.
Discharge port 100 - 200mm
Top discharge
Semi-open type impeller, ductile cast iron
(closed type on KRS-63, 85.5)
Three phase, 4 pole motors (from 2.2 to 9kW) for
performance and durability
CONTRACTOR PUMPS
KRS2-C3 80 340 255 620 499 315 600 145
KRS2-D3 80 365 275 705 584 350 685 155
KRS2-C4 100 350 260 720 584 320 685 155 5 essential features ...
KRS2-D4 100 365 275 710 574 350 675 155 5 times the life!
KRS2-C6 150 415 305 767 585 373 685 175 Standard in every Tsurumi KRS submersible
KRS2-D6 150 434 324 813 632 407 744 180
KRS2-8S 200 472 356 933 701 403 814 300 Anti-wicking cable entry
KRS815 200 481 347 1069 837 440 949 275 Twin dual SiC mech seals … 5 times
KRS819 200 572 445 1238 1006 530 1156 345 higher corrosion, wear & heat resistance
KRS822 200 572 445 1238 1006 530 1156 345 than tungsten carbide
KRS822L 200 572 445 1238 1006 530 1156 345
KRS1022 250 520 250 1439 1156 - - 450 Do not operate pump below C.W.L
Mech seals protected in oil chamber
(continuous running water level)
with patented oil lifter
LOW HEAD / HIGH FLOW VERSION
Thermal motor protection
KRS-43 100 378 288 723 561 347 622 170 SLURRY
KRS-63 150 385 295 867 686 365 747 300 V-ring protector for mech seal
KRS-65.5 150 423 303 790 608 369 669 190
KRS-85.5 200 445 325 942 710 413 771 295
KRS2-69 150 487 371 812 630 424 742 200
KRS2-89 200 473 354 933 701 403 813 300
SLURRY VERSION
KRS2-80 80 350 260 786 666 326 766 250
KRS2-100 100 415 305 815 678 373 754 250
KRS2-150 150 434 324 879 699 407 811 250
KRS-200 200 576 445 1181 950 530 1140 285
Max.
Motor Rated Head Capacity Max. Solid Water
Discharge Output Current max. max. Starting Dry Handling Depth Cable
Port (mm) Model S/code kW A Phase m l/min Method Weight kg mm m Length m List Price
80 KRS2-C3 TUC-KRS2-C3 2.2 5.1 3-phase 10 1,000 d.o.l. 72 8 30 8 $3,831
80 KRS2-D3 TUC-KRS2-D3 3.7 8.0 3-phase 17 1,400 d.o.l. 91 8 30 8 $4,394
100 KRS2-C4 TUC-KRS2-C4 3.7 8.0 3-phase 14 1,600 d.o.l. 88 8 30 8 $4,394
100 KRS2-D4 TUC-KRS2-D4 5.5 12.1 3-phase 20 2,000 d.o.l. 98 8 30 8 $5,199
150 KRS2-C6 TUC-KRS2-C6 7.5 15.0 3-phase 19 2,800 d.o.l. 130 8 30 8 $5,830
150 KRS2-D6 TUC-KRS2-D6 11 22.0 3-phase 22 3,700 d.o.l. 158 8 30 8 $7,157
200 KRS2-8S TUC-KRS2-8S 11 22.0 3-phase 18 5,100 d.o.l. 174 8 30 8 $8,063
200 KRS815 TUC-KRS815 15 29 3-phase 21.5 6,400 d.o.l. 235 25 30 8 $10,988
200 KRS819 TUC-KRS819 18.5 33.5 3-phase 29 5,500 d.o.l. 385 25 30 10 $18,530
200 KRS822 TUC-KRS822 22 43 3-phase 34 5,300 d.o.l. 390 25 30 10 $18,017
200 KRS822L TUC-KRS822L 22 42 3-phase 26 5,900 d.o.l. 390 25 30 10 $18,017
250 KRS1022 TUC-KRS1022 22 45 3-phase 12.2 12,000 d.o.l. 450 25 30 10 $23,451
LOW HEAD / HIGH FLOW VERSION
100 KRS-43 TUC-KRS-43 3 6.5 3-phase 14.8 1,820 d.o.l. 95 12 30 8 $4,440
150 KRS-63 TUC-KRS-63 3 6.5 3-phase 8 3,250 d.o.l. 97 15 30 8 $4,776
150 KRS-65.5 TUC-KRS-65.5 5.5 12.1 3-phase 17 3,200 d.o.l. 118 20 30 8 $5,963
150 KRS2-69 TUC-KRS2-69 9 19 3-phase 21 4,250 d.o.l 155 20 30 8 $8,304
200 KRS-85.5 TUC-KRS-85.5 5.5 12.1 3-phase 10 4,850 d.o.l. 126 20 30 8 $6,997
200 KRS2-89 TUC-KRS2-89 9 19 3-phase 15 5,300 d.o.l 175 30 30 8 $8,043
SLURRY VERSION
80 KRS2-80 TUC-KRS2-80 4 9.5 3-phase 15.8 1,670 d.o.l. 105 30 30 8 $6,328
100 KRS2-100 TUC-KRS2-100 6 13 3-phase 17.1 2,350 d.o.l. 145 30 30 8 $6,624
150 KRS2-150 TUC-KRS2-150 9 18.5 3-phase 22 3,250 d.o.l. 170 30 30 8 $8,372
200 KRS-200 TUC-KRS-200 18 34.5 3-phase 31 4,000 d.o.l. 380 30 30 8 $31,205
Tsurumi seawater kit available … p 22 Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 17
March 2017 | Issue 2
QUARRY/PILING/
Global Leader 4 POLE, SAND & MUD CONSTRUCTION
1.2.5 NKZ SERIES
The NKZ series of high head sand pumps have a spiral
pump casing and a shaft mounted agitator for
smooth suction of slurry, mud or sand.
The pump has a water jacket for cooling the motor.
CONTRACTOR PUMPS
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
NKZ3-C3 80 466 404 372 249 368 664 225
NKZ3-C4 100 466 404 387 249 368 709 225
NKZ3-D4 100 485 424 382 414 380 715 220 Do not operate pump below C.W.L
NKZ3-100H 100 547 486 422 450 414 841 240 (continuous running water level)
NKZ3-D6 100 620 520 458 266 450 798 240
Motor Rated Head Capacity Dry Max. Solid Max. Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length
Port (mm) Model S/code kW A Phase m l/min Method kg mm m m List Price
80 NKZ3-C3 TUC-NKZ3-C3 2.2 5.1 3-phase 12.5 900 d.o.l. 91 30 30 8 $4,195
100 NKZ3-C4 TUC-NKZ3-C4 3.7 8 3-phase 16 1,500 d.o.l. 97 30 30 8 $4,605
100 NKZ3-D4 TUC-NKZ3-D4 5.5 12.1 3-phase 19 2,000 d.o.l. 115 30 30 8 $5,368
100 NKZ3-100H TUC-NKZ3-100H 11 22 3-phase 29 2,400 d.o.l. 196 20 30 8 $8,624
150 NKZ3-D6 TUC-NKZ3-D6 11 22 3-phaseFull data
22 sheets
4,000 d.o.l. 192 curves
with performance 30available for
30 application
8 selection
$7,363
CONTRACTOR PUMPS
pump delivers long-lasting performance and
outstanding durability.
They have a water jacket for forced cooling of the
motor, which permits the pump to operate at low
water levels for extended period of time.
Discharge port 80 - 200mm
Side discharge
Semi open type impeller (Hi chrome)
Three phase, 4 pole & 6 pole motors, 5.5 - 37kW 0 5,000 10,000
Capacity (L/min)
Hi chrome wearing parts for longevity
Water jacket cools motor even at low water levels
Air release valve in water jacket prevents
5 essential features …. air-lock
5 times the life!
Standard in every Tsurumi GPN Chromium Molybdenum motor shaft
submersible
Applications Standard Accessories
Anti-wicking cable entry Draining sand laden water Hose coupling (1 pc)
Twin dual SiC mech seals … Transferring & draining
bentonite slurry in piling Options
5 times higher corrosion,
wear & heat resistance than
works Seawater resistant
tungsten carbide Draining slurry in cement adaptor kit
plants,
Mech seals protected in oil quarries or mines
chamber with patented oil Pumping sediments in
lifter wastewater
treatment plant
Thermal motor protection
Pumping scale at steel
V-ring protector for mech works
seal
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
GPN35.5 80 487 426 429 307 390 777 270
GPN411 100 617 517 481 328 450 860 295
GPN415 100 617 517 481 328 450 860 295
GPN422 100 725 625 488 335 573 1102 300
GPN622 150 725 625 528 335 572 1102 300 Do not operate pump below C.W.L
GPN837 200 1015 850 898 749 1606 560 (continuous running water level)
Max.
Motor Rated Head Capacity Dry Max. Solid Water Cable
Discharge Output Current max. max. Starting Weight Handling Depth Length
Port (mm) Model S/code kW A Phase Poles m l/min Method kg mm m m List Price
GPN35.5
80 TUC-GPN35.5 5.5 12.1 3-phase 4 16.3 1,900 d.o.l. 145 30 40 8 $6,655
(GPN3-80)
GPN411
100 TUC-GPN411 11 22 3-phase 4 19.3 3,250 d.o.l. 217 30 40 8 $9,716
(GPN3-100)
100 GPN415 TUC-GPN415 15 27.5 3-phase 4 21 4,000 d.o.l. 220 30 40 8 $10,471
100 GPN422 TUC-GPN422 22 42 3-phase 4 34 3,600 d.o.l. 415 30 40 8 $29,504
150 GPN622 TUC-GPN622 22 42 3-phase 4 28 5,000 d.o.l. 415 30 40 8 $29,504
200 GPN837 TUC-GPN837 37 73 3-phase 6 24 9,000 Star-Delta 800 30 40 8 $42,465
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 19
March 2017 | Issue 2
6 POLE
The GSZ-6 series are powerful, high volume sand pumps
operated by a 6-pole motors. Hi chrome wearing parts,
coupled with the slow speed motor, will ensure extremely
long wear life. It has a water jacket for forced cooling of the
motor which permits the pump to operate at low water
levels for extended period of time.
Discharge port 200mm
Side discharge
Semi open type impeller (Hi chrome iron)
Three phase, 6 pole motors, 22 - 37kW
Hi chrome wearing parts for longevity
Water jacket cools motor even at low water levels
CONTRACTOR PUMPS
5 great features ... 5 times the life!
Standard in every Tsurumi GSZ submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher
corrosion, wear & heat resistance than
tungsten carbide
Mech seals protected in oil chamber with
patented oil lifter
DIMENSIONS (MM)
Model d A A1 B D H W1 Thermal motor protection
GSZ5-37-4H 150 900 760 520 700 1553 440 V-ring protector for mech seal
GSZ5-37-4 200 915 750 550 660 1583 480
GSZ4-45-4 200 915 750 600 660 1591 460
GSZ2-55-4 250 1050 850 655 708 1927 510
GSZ2-75-4 250 1050 850 655 708 1927 510
GSZ2-75-4L 250 1050 850 700 739 1972 730
6 POLE VERSION
GSZ5-22-6 200 965 800 474 720 1393 350
GSZ5-37-6 200 1047 882 430 804 1424 370
SLURRY VERSION
GSD-37-4 200 915 750 550 660 1583 480
GSD-55-4 200 1050 850 655 708 1927 510
GSD-75-4 250 1050 850 655 708 1927 510
6 POLE VERSION
200 GSZ5-22-6 TUC-GSZ5-22-6 22 45 3-phase 21 9,000 d.o.l 685 50 10 $32,085
200 GSZ5-37-6 TUC-GSZ5-37-6 37 79 3-phase 28 10,500 Star Delta 796 50 10 $43,245
SLURRY VERSION
200 GSD-37-4 TUC-GSD-37-4 37 73 3-phase 37 7,000 Star Delta 685 25 10 $35,607
200 GSD-55-4 TUC-GSD-55-4 55 105 3-phase 38 9,000 Star Delta 1215 25 10 $45,669
250 GSD-75-4 TUC-GSD-75-4 75 150 3-phase 48 10,600 Star Delta 1215 25 10 $53,349
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 21
March 2017 | Issue 2
Port Motor Head max. Capacity max. Starting Dry Weight Max. Solids Max. water Cable List
(mm) Model S/code Output kW m l/min Method kg mm Depth m Length m Price
50 KTV2-22 TUC-KTV2-22-1V 2.2 24 525 d.o.l. 23.0 8.5 50 10 $7,828
80 KTZ35.5 TUC-KTZ35.5-1V 5.5 32 1,100 d.o.l. 82 10 50 10 $9,633
100 KTZ411 TUC-KTZ411-1V 11 48.5 1,440 d.o.l. 133 10 50 10 $13,675
80 LH311W TUC-LH311W-1V 11 79 825 d.o.l. 130 8.5 50 10 $16,773
80 LH322W TUC-LH322W-1V 22 120 1,180 d.o.l. 304 8.5 50 10 $27,105
100 LH422 TUC-LH422-1V 22 66 2,400 d.o.l. 350 6 50 10 $22,430
150 LH637 TUC-LH637-1V 37 89.5 2,380 Star Delta 495 6 50 10 $33,249
150 LH6110 TUC-LH6110-1V 110 177 3,000 Star Delta 3000 6 30 10 $78,331
200 LH837 TUC-LH837-1V 37 51.8 5,375 Star Delta 495 20 50 10 $33,249
200 LH8110 TUC-LH8110-1V 110 107 6,500 Star Delta 1325 20 30 10 $78,331
STAINLESS STEEL PUMPS
80 LH311W TUC-LH311W-141V 11 79 825 d.o.l. 130 8.5 50 10 $40,269
80 LH322W TUC-LH322W-141V 22 120 1,180 d.o.l. 304 8.5 50 10 $72,789
100 LH422 TUC-LH422-14-1V 22 66 2,400 d.o.l. 350 6 50 10 $64,593
150 LH637 TUC-LH637-14-1V 37 89.5 2,380 Star Delta 495 6 50 10 $98,697
150 LH6110 TUC-LH6110-141V 110 177 3,000 Star Delta 3000 6 30 10 poa
200 LH837 TUC-LH837-14-1V 37 51.8 5,375 Star Delta 495 20 50 10 $98,697
200 LH8110 TUC-LH8110-14-1V 110 107 6,500 Star Delta 1325 20 30 10 poa
80 80SFQ25.5 TUI-SFQ25.5-80V 5.5 30 1,340 d.o.l. 124 18 10 $20,805
80 80SFQ211 TUI-SFQ211-80V 11 44 1,950 d.o.l. 143 23 10 $24,783
INDUSTRIAL PUMPS
& wastewater treatment equipment
INDUSTRIAL PUMPS
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 23
March 2017 | Issue 2
required. Simply connect power to each pump. By adjusting the output range as the automatic pumps.
float levels the pumps can be set to run alternately. If extra
capacity is required, both pumps will automatically work together.
For online demo search Tsurumi Pump Automatic
Operation or click You Tube image
1. ‘START’ Float 3 activates pump W to discharge water. 1. ‘START’ Float 4 activates pump A to discharge water.
3. ‘STOP’ float 2 stops pump W. ’START’ float 3 of pump W rests for one 3. ‘STOP’ float 1 stops pump A. ‘START’ float 3 of pump W has reset, ready
discharge operation. for operation next cycle.
If the inflow exceeds the ability of the operating pump, the top float on the second pump will activate ensuring maximum pumping capacity.
Override float
Start float
Start float
NEW
NEW
INDUSTRIAL PUMPS
40 40PU2.25 TUI-PU2.25-40 0.25 3-phase 0.8 6.5 210 D.O.L. 7.1 35 6 $639
50 50PU2.25 TUI-PU2.25-50 0.25 3-phase 0.9 6.6 210 d.o.l. 6.6 35 6 $639
50 50PU2.4S TUI-PU2.4S-50P 0.4 single 3.1 9.6 270 condenser 7.1 35 5 $784
50 50PU2.4 TUI-PU2.4-50 0.4 3-phase 1.2 9.6 270 d.o.l. 7 35 6 $690
50 50PU2.75S TUI-PU2.75SP 0.75 single 5.4 12.5 360 condenser 8.9 35 5 $1,007
50 50PU2.75 TUI-PU2.75-50 0.75 3-phase 1.9 12.5 360 d.o.l. 8.3 35 6 $718
80 80PU21.5 TUI-PU21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 15.8 46 6 $1,404
80 80PU22.2 TUI-PU22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 22 46 6 $2,248
80 80PU23.7 TUI-PU23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 27 46 6 $2,789
Automatic (two floats)
40 40PUA2.15S TUI-PUA2.15SP 0.15 single 3 5.5 200 Capacitor 6.6 35 5 $734
40 40PUA2.15 TUI-PUA2.15-40 0.15 3-phase 0.7 5.5 200 D.O.L. 6.2 35 6 $582
40 40PUA2.25S TUI-PUA2.25SP 0.25 single 2.5 6.5 210 Capacitor 7.7 35 5 $925
40 40PUA2.25 TUI-PUA2.25-40 0.25 3-phase 0.8 6.5 210 D.O.L. 6.7 35 6 $812
50 50PUA2.4S TUI-PUA2.4SP 0.4 single 3.0 9.6 270 condenser 7.7 35 5 $958
50 50PUA2.4 TUI-PUA2.4-50 0.4 3-phase 1.15 9.6 270 d.o.l. 7.5 35 6 $841
50 50PUA2.75S TUI-PUA2.75SP 0.75 single 5.4 12.5 360 condenser 9.5 35 5 $1,316
50 50PUA2.75 TUI-PUA2.75-50 0.75 3-phase 1.8 12.5 360 d.o.l. 8.8 35 6 $946
80 80PUA21.5 TUI-PUA21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 16.5 46 6 $2,030
80 80PUA22.2 TUI-PUA22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 23 46 6 $2,601
80 80PUA23.7 TUI-PUA23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 28 46 6 $3,188
Alternation version (three floats)
40 40PUW2.15S TUI-PUW2.15SP 0.15 single 3 5.5 200 Capacitor 6.6 35 5 $887
40 40PUW2.15 TUI-PUW2.15-40 0.15 3-phase 0.7 5.5 200 D.O.L. 6.2 35 6 $699
40 40PUW2.25S TUI-PUW2.25SP 0.25 single 2.5 6.5 210 Capacitor 7.7 35 5 $1,206
40 40PUW2.25 TUI-PUW2.25-40 0.25 3-phase 0.8 6.5 210 D.O.L. 6.7 35 6 $1,090
50 50PUW2.4S TUI-PUW2.4-SP 0.4 single 3.0 9.6 270 d.o.l. 7.5 35 5 $1,196
50 50PUW2.4 TUI-PUW2.4-50 0.4 3-phase 1.15 9.6 270 d.o.l. 7.5 35 6 $1,145
50 50PUW2.75 TUI-PUW2.75-50 0.75 3-phase 5.4 12.5 360 d.o.l. 8.8 35 6 $1,221
80 80PUW21.5 TUI-PUW21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 16.5 46 6 $2,202
80 80PUW22.2 TUI-PUW22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 23 46 6 $2,705
80 80PUW23.7 TUI-PUW23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 28 46 6 $3,410
TOS Guide Kits (note: guide rails not included in kit)
TOK4-P TUI-TOK4-P Guide rail fitting for VANCS series up to 0.75kW $307
TOK2-65 TUI-TOK2-65 Guide rail fitting for VANCS series 1.5kW $446
TOK2-65T TUI-TOK2-65T Full data
Guide rail fitting for VANCS sheets
series with performance curves available for application selection
2.2/3.7kW $486
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 25
March 2017 | Issue 2
60 HZ options …
designed for a life at sea
TM manual version Call for chemical compatibility chart TMA automatic version
on VANCs pumps
DIMENSIONS (MM)
INDUSTRIAL PUMPS
Model d A B H W1 W2
40TM2.25S 40 236 162 360 325 110
40TM2.25 40 236 162 349 310 110
50TM2.4S 50 236 162 360 325 110
50TM2.4 50 236 162 360 325 110
50TM2.75 50 236 162 374 335 110
50TM21.5 50 295 196 435 390 110
80TM22.5 80 311 212 559 500 130
80TM23.7 80 311 212 594 535 130
Motor
Head Capacity Dry Weight Cable
Discharge Output Running max. max. Kg FREE Length
Port (mm) Model S/code kW Phase Amp m l/min Starting Method STANDING m List Price
40 40TM2.25S TUI-TM2.25SP 0.25 single 2.5 9 240 condenser 6.7 5 $2,218
40 40TM2.25 TUI-TM2.25-40 0.25 3-phase 0.9 9 240 d.o.l. 5.7 6 $2,045
50 50TM2.4S TUI-TM2.4SP 0.4 single 3.1 12 290 condenser 6.7 5 $2,260
50 50TM2.4 TUI-TM2.4-50 0.4 3-phase 1.2 12 300 d.o.l. 6.6 6 $2,087
50 50TM2.75 TUI-TM2.75-50 0.75 3-phase 1.9 15 350 d.o.l. 7.8 6 $2,225
50 50TM21.5 TUI-TM21.5-50 1.5 3-phase 4.0 17 650 d.o.l. 14.9 6 $4,085
80 80TM22.2 TUI-TM22.2-80 2.2 3-phase 5.1 19 700 d.o.l. 21 6 $5,833
80 80TM23.7 TUI-TM23.7-80 3.7 3-phase 7.5 26 900 d.o.l. 26 6 $7,184
Automatic (two floats)
40 40TMA2.25S TUI-TMA2.25SP 0.25 single 2.5 9 240 condenser 7.2 5 $2,430
40 40TMA2.25 TUI-TMA2.25-40 0.25 3-phase 0.9 9 240 d.o.l. 6.2 6 $2,255
50 50TMA2.4S TUI-TMA2.4SP 0.4 single 3.1 12 290 condenser 7.2 5 $2,418
50 50TMA2.4 TUI-TMA2.4-50 0.4 3-phase 1.2 12 300 d.o.l. 7.1 6 $2,310
50 50TMA2.75 TUI-TMA2.75-50 0.75 3-phase 1.9 15 350 d.o.l. 8.4 6 $2,493
50 50TMA21.5 TUI-TMA21.5-50 1.5 3-phase 4.0 17 650 d.o.l. 15.5 6 $4,656
80 80TMA22.2 TUI-TMA22.2-80 2.2 3-phase 5.1 19 700 d.o.l. 22 6 $6,230
80 80TMA23.7 TUI-TMA23.7-80 3.7 3-phase 7.5 sheets
Full data 26 with900 d.o.l.
performance 27 for application
curves available 6 $7,771
selection
All prices exclude gst, ex Sydney warehouse
Page 26 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
INDUSTRIAL PUMPS
corrosion, wear & heat resistance than
tungsten carbide
Mech seals protected in oil chamber with 0 400 800
Capacity (L/min)
1,200
patented oil lifter
1000 volt options p22
Thermal motor protection
V-ring protector for mech seal
DIMENSIONS (MM)
C.W.L
Model L H L.W.L C.W.L Cast 316 SS guide rail kits for
50SFQ2.4 252 397 90 355 5.5kW - 11 kW pumps only
50SFQ2.75 252 397 90 397 Lifting chain 5m
80SFQ21.5 329 484 95 415 (with shackles)
80SFQ23.7 359 542 130 552 Guide support
80SFQ25.5 635 884 190 690 (with bolts & nuts)
80SFQ27.5 635 884 190 690 Guide hook (with bolts)
L.W.L 80SFQ211 635 892 190 892 Duckfoot bend
TOS80SFQ25.5 808 875 Guide connector (with bolts)
TOS80SFQ27.5 808 875 JIS 10kg/cm2 flange
TOS80SFQ211 808 923 Foundation bolts (with nuts)
Do not operate the pump at the lowest water level longer than 30
minutes (15 minutes on the models with 1.5kW power output).
REAL QUALITY …
VALUE PACKED PRICES
Motor
Capacity Max. Solid
Discharge Output Head max. max. Starting Dry Weight Handling Cable Length
Port (mm) Model S/code kW Phase m l/min Method kg mm m List Price
50 50UT2.4S TUI-UT2.4SP 0.4 single 9 270 Capacitor 14 35 5 $354
50 50UT2.75S TUI-UT2.75SP 0.75 single 12.5 440 Capacitor 16 35 5 $420
Automatic
50 50UTZ2.4S TUI-UTZ2.4SP 0.4 single 9 270 Capacitor 14 35 5 $396
50 50UTZ2.75S TUI-UTZ2.75SP 0.75 single 12.5 440 Capacitor 16 35 5 $498
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 28 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
INDUSTRIAL PUMPS
DIMENSIONS (MM)
0 200 400 0 400 800
Capacity (L/min) Capacity (L/min) Without Level Control
Model d A A4 D B H W1 W2
Automatic version 40U2.25S 40 241 207 172 107 383 340 100
shown with guide rail 40U2.25 40 241 207 172 107 383 340 100
option 50U2.4S 50 236 199 158 102 433 390 105
50U2.4 50 236 199 158 102 400 355 105
50U2.75 50 249 212 172 102 395 365 105
80U2.75 80 383 329 172 173 421 390 130
80U21.5 80 420 366 200 173 501 430 135
80U22.2 80 502 410 240 225 562 490 160
80U23.7 80 502 410 234 226 565 520 160
With Level Control
Model d A A4 D B H FL1 FL2
Guide adaptors allow B, BZ, C, U & UZ 40UA2.25S 40 241 207 194 107 433 100 585
series pumps to fit Flygt guide rail system
50UA2.4S 50 236 199 187 102 450 105 590
80-80mm TS-FLAD-TEG-33 $150
Motor
Head Capacity Dry Weight Max. Solid Cable
Discharge Suits Flygt Output Running max. max. Starting kg Handling Length
Port (mm) Adaptor Model S/code kW Phase Amp m l/min Method FREE STANDING mm m List Price
40 40U2.25S* TUI-U2.25SP 0.25 single 2.9 7.4 260 Split phase 14 35 5 $878
40 40U2.25* TUI-U2.25-40 0.25 3-phase 0.7 7.5 260 d.o.l. 13.5 35 6 $804
50 50U2.4S* TUI-U2.4SP 0.4 single 3.4 11 270 Capacitor 20 35 5 $949
50 50U2.4* TUI-U2.4-50 0.4 3-phase 1.1 11 270 d.o.l. 19.2 35 6 $831
50 50U2.75* TUI-U2.75-50 0.75 3-phase 2.1 15 270 d.o.l. 22.7 35 6 $1,004
80 TEG-33 80U2.75 TUI-U2.75-80 0.75 3-phase 2.1 12.2 450 d.o.l. 28.5 46 6 $1,104
80 TEG-33 80U21.5 TUI-U21.5-80 1.5 3-phase 3.5 16.5 600 d.o.l. 41.5 46 6 $1,483
80 TEG-33 80U22.2 TUI-U22.2-80 2.2 3-phase 4.9 19 800 d.o.l. 55 56 6 $2,102
80 TEG-33 80U23.7 TUI-U23.7-80 3.7 3-phase 7.7 23.5 1,030 d.o.l. 75 56 6 $2,906
Automatic (two floats)
40UA2.25S TUI-UA2.25SP 0.25 single 2.9 7.4 260 Split phase 14.5 35 5 $1,004
50UA2.4S TUI-UA2.4SP 0.4 single 3.4 11 270 Capacitor 20.5 35 5 $1,140
Discharge bends and stand sets (not required with TOS guide kits)
BEND80 TUI-BEND80 suits all 80mm pump s up to 1.5kW (Oval - BSP screw flange) $122
BEND80-80 TUI-BEND80-80 suits all 80mm pumps from 2.2kW (JIS 10kg/cm2 flange ) $200
* Bend set not required, part of casing, in 40mm & 50mm pumps 0.75kW and under
TOS Guide Kits (note: guide rails not included in kit) Guide rail size (outside dim)
TOK4-A TUI-TOK4-A Suits 40mm & 50mm U series pumps except 50U21.5 $314
TOS5-50 TUI-TOS5-50 0 Suits 50U21.5 Full 100
onlydata
(notsheets 200
stocked)
with performance curves available for application $552
selection
Capacity (L/min)
TOS3-65-80 TUI-TOS3-65-80 Suits 80mm U series pumps $816
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 29
March 2017 | Issue 2
0 1,000 2,000
DIMENSIONS (MM) Capacity (L/min)
Model A A1 A2 A3 A5 A6 D D1 D2 W1 W2 H H1 H2 M1 M2
TOS50UZ41.5 368 245 123 195 130 218 250 110 140 585 230 626 786 60 550 350 C.W.L.
TOS80UZ41.5 446 320 126 260 165 258 261 128 133 630 275 670 829 33 600 500
TOS80UZ42.2 446 320 126 260 165 258 261 128 133 630 275 670 829 33 600 500
TOS80UZ43.7 473 320 153 260 165 258 290 140 150 680 275 721 880 33 600 500
TOS100UZ43.7 560 405 155 310 181 286 314 149 165 735 330 777 936 40 700 600 L.W.L.
TOS80UZ45.5 510 350 160 290 165 258 358 179 179 800 310 927 1185 28 600 500
TOS100UZ45.5 585 425 160 330 181 286 358 179 179 845 355 974 1230 38 700 600
TOS80UZ47.5 510 350 160 290 165 258 358 179 179 820 310 948 1220 28 600 500
TOS100UZ47.5 585 425 160 330 181 286 358 179 179 865 355 995 1265 35 700 600
TOS80UZ411 518 350 168 280 165 258 358 179 179 850 325 1107 1260 26 600 500
TOS100UZ411 593 425 168 330 181 286 385 179 179 895 370 1054 1310 33 700 600
Outlet mm d T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 K1 K2 K3 K4 K5 K6 B1 B2 B3
50 50 250 230 185 70 63 160 200 50 25 55 25 120 40 110 10 40 120 250 203 15
80 80 288 230 195 80 63 220 250 60 25 55 32 170 40 155 15 40 170 290 237 15
100 100 362 300 245 100 74 250 290 95 30 66 Full
50 data
200 sheets with
45 181 19 performance
45 200 340 curves
285 15 available for application selection
INDUSTRIAL PUMPS
Wastewater Treatment Selection Guide …
call for your copy
Grundfos
Guide adaptors allow MG series pumps to
be fitted to Grundfos SEG series guide rail
kit
TS-GRAD-SEG50 $250
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 31
March 2017 | Issue 2
Automatic version
shown with guide rail
option
INDUSTRIAL PUMPS
INDUSTRIAL PUMPS
DIMENSIONS (MM)
Model d A A1 A2 A3 B D D1 D2 W1 W2 H
80BZ41.5 80 523 302 129 190 303 273 133 140 590 235 631
100BZ42.2 100 551 317 129 190 328 273 133 140 590 235 631
100BZ43.7 100 584 327 153 200 328 289 139 150 640 235 681
Guide adaptors allow B, BZ, C, U & UZ series 100BZ45.5 100 716 407 204 280 380 421 205 216 790 305 925
pumps to fit Flygt guide rail system
100BZ47.5 100 716 407 204 280 380 421 205 216 820 305 946
80-80mm TS-FLAD-TEG-33 $150 100BZ411H 100 727 407 215 280 377 431 205 226 865 330 1023
80-100 mm TS-FLAD-TEG-34 $170 100BZ411 100 727 407 215 280 377 431 205 226 865 330 1023
100-100mm TS-FLAD-TEG-44 $190 Do not operate the pump at the lowest water level (L.W.L.)
longer than 30 minutes
Motor
Capacity Dry Weight Max. Solid Cable
Discharge Suits Flygt Output Running Head max. l/ Starting Kg FREE Handling Length
Port (mm) Adaptor Model S/code kW Phase Amp max. m min Method STANDING mm m List Price
80 TEG-33 80BZ41.5 TUI-BZ41.5-80 1.5 3-phase 4.0 9.1 1,480 d.o.l. 78 80 10 $3,048
100 TEG-33/34 100BZ42.2 TUI-BZ42.2-100 2.2 3-phase 5.3 11.3 1,800 d.o.l. 80 80 10 $3,006
100 TEG-33/34 100BZ43.7 TUI-BZ43.7-100 3.7 3-phase 7.9 15.8 2,220 d.o.l. 100 80 10 $3,558
100 TEG-44 100BZ45.5* TUI-BZ45.5-100 5.5 3-phase 12.1 18 2,630 d.o.l. 175 80 10 $5,960
100 TEG-44 100BZ47.5* TUI-BZ47.5-100 7.5 3-phase 15.9 23 2,960 d.o.l. 194 80 10 $6,418
100 TEG-44 100BZ411H* TUI-BZ411H-100 11 3-phase 23.8 30 2,810 Star-Delta 219 80 10 $8,243
100 TEG-44 100BZ411* TUI-BZ411-100 11 3-phase 23.8 26 3,570 Star-Delta 219 80 10 $8,188
100 100BZ415* TUI-BZ415-100 15 3-phase 35 3,500 Star-Delta 295 80 10 $14,196
With Guide Rail Fitting (*Dry weight of guide rail fitting excluding ductfoot bend)
100 TOS100BZ415 TUI-BZ415-100TO 15 three 35 3500 Star-Delta *290 80 10 $15,536
Discharge bends and stand sets (not required with TOS guide kits)
BEND80-80 TUI-BEND80-80 suits all BZ series 80mm pumps (JIS 10kg/cm2 flange ) $200
BEND80-100 TUI-BEND80-100 suits BZ series 100mm pumps up to 3.7kW (JIS 10kg/cm2 flange ) $235
BEND100-100 TUI-BEND100-100 suits BZ series 100mm pumps over 5.5 kW (JIS 10kg/cm2 flange ) $278
*Stand set TUI-STANDSET required for BZ series 100mm pumps over 5.5kW $110
TOS Guide Kits (note: guide rails not included in kit)
TOS3-80-80 TUI-TOS3-80-80 suits all BZ series 80mm pumps $779
TOS3-80-100 TUI-TOS3-80-100 suits BZ series 100mm pumps up to 3.7kW $894
TOS3-100-100 TUI-TOS3-100-100 suits BZ series 100mm pumps over 5.5 kW $1,398
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 33
March 2017 | Issue 2
Automatic version
shown with guide For online demo
rail option search Tsurumi
INDUSTRIAL PUMPS
DIMENSIONS (MM)
DESIGNED TO LAST …. Model d A B B1 D W1 W2 H H1
INDUSTRIAL PUMPS
features detailed page 4 32MG21.5 32 360 201 90 217 485 160 558 -
50MG22.2 50 438 206 - 226 550 180 594 -
50MG23.7 50 438 206 - 226 550 180 594 -
TOS32MG21.5 - 367 - - 216 490 160 562 -
TOS50MG22.2 - 367 - - 226 580 210 627 847
0 100 200 300 TOS50MG23.7 - 367 - - 226 580 210 627 847
Capacity (L/min)
Do not operate the pump at the lowest water level (L.W.L.) longer than 30 minutes.
Motor
Head Capacity Dry Weight Cable
Discharge Output Running max. max. Starting kg Length
Port (mm) Model S/code kW Phase Amp m l/min Method FREE STANDING m List Price
32 32MG21.5 TUI-MG21.5-32 1.5 3-phase 3.9 25 145 d.o.l. 36 6 $1,530
50 50MG22.2 TUI-MG22.2-50 2.2 3-phase 5.5 25 320 d.o.l. 77 6 $2,421
50 50MG23.7 TUI-MG23.7-50 3.7 3-phase 7.8 35 320 d.o.l. 78 6 $2,465
With guide rail kit (note: suit 25mm guide rails, not included in kit)
32 TOS32MG21.5 TUI-MG21.5-32TO 1.5 3-phase 3.9 25 145 d.o.l. 48 6 $1,821
50 TOS50MG22.2 TUI-MG22.2-50TO 2.2 3-phase 5.5 25 320 d.o.l. 86 6 $2,793
50 TOS50MG23.7 TUI-MG23.7-50TO 3.7 3-phase 7.8 35 320 d.o.l. 87 6 $2,887
Replacement TOS Guide Kits (note: guide rails not included in kit)
TOS32 TUI-TOS32 Guide rail fitting, suits all 32mm MG series pumps 13 $650
TOSH-50 TUI-TOSH-50 Guide rail fitting, suits all 50mm MG series pumps 13 $688
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 35
March 2017 | Issue 2
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 36 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
INDUSTRIAL PUMPS
250 250B445 TUI-B445-250 45 4 pole 3-phase 38 11000 star-delta 780 45x70 10 $32,112
250 250B455 TUI-B455-250 55 4 pole 3-phase 44 10000 star-delta 1100 45x70 10 $57,076
250 250B475 TUI-B475-250 75 4 pole 3-phase 57 10000 star-delta 1150 35x75 10 $62,069
With Guide Rail Fitting (*Dry weight of guide rail fitting excluding ductfoot bend)
200 TO200B47.5 TUI-B47.5-200TO 7.5 4 pole 3-phase 14 5000 d.o.l. *208 80x60 8 $15,222
200 TO200B411 TUI-B411-200TO 11 4 pole 3-phase 16 6500 star-delta *257 68x60 8 $15,755
200 TO200B415 TUI-B415-200TO 15 4 pole 3-phase 20 8000 star-delta *287 70x60 8 $18,713
200 TO200B422H TUI-B422H-200TO 22 4 pole 3-phase 35 4500 star-delta *420 75 10 $24,581
200 TO200B422 TUI-B422-200TO 22 4 pole 3-phase 25 7000 star-delta *390 75 10 $26,252
200 TO200B437 TUI-B437-200TO 37 4 pole 3-phase 37.5 9000 star-delta *605 40x77 10 $31,981
200 TO200B455 TUI-B455-200TO 55 4 pole 3-phase 57.5 8000 star-delta *1020 40x110 10 $65,380
250 TO250B611 TUI-B611-250TO 11 6 pole 3-phase 11 8500 star-delta *390 80x68 8 poa
250 TO250B415 TUI-B415-250TO 15 4 pole 3-phase 13 10000 star-delta *380 73 8 poa
250 TO250B622 TUI-B622-250TO 22 6 pole 3-phase 18 12000 star-delta *630 90x90 10 $30,094
250 TO250B430 TUI-B430-250TO 30 4 pole 3-phase 18 10000 star-delta *610 75x80 10 $32,112
250 TO250B437 TUI-B437-250TO 37 4 pole 3-phase 32 12000 star-delta *640 63x80 10 $33,899
250 TO250B445 TUI-B445-250TO 45 4 pole 3-phase 38 11000 star-delta *680 45x70 10 $35,765
250 TO250B455 TUI-B455-250TO 55 4 pole 3-phase 44 10000 star-delta *1040 45x70 10 $64,487
250 TO250B475 TUI-B475-250TO 75 4 pole 3-phase 57 10000 star-delta *1090 35x75 10 $68,586
Discharge Bends & Stands
BEND150-150 TUI-BEND150-150 suits all B series 150mm pumps (JIS 10kg/cm2 flange ) $904
#
Stand set required Contact Aussie for details on stand set A, B or C
Pumps over 150mm supplied with bends
TOS Guide Kits (note: guide rails not included in kit)
TOS-150A TUI-TOS3-50 suits all B series 150mm pumps $3,994
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 37
March 2017 | Issue 2
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 38 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
WATER TREATMENT
Easy to install
& maintain,
efficient to run
Full data sheets with performance curves available for application selection
EJECTOR SYSTEMS
Global Leader EASY AERATION WASTEWATER TREATMENT
Basic submersible unit - does not include silencer, valve kit &
5m lifting chain or ejector accessories.
For complete unit select ejector pump from table 1
and either ejector (diffuser on side of pump) or TOS ejector
(diffuser with guide rail kit) from table 2.
Full data sheets with performance curves available for application selection
(150) $9,294
1750 34.80 9.17 33.70 15.41 32.80 21.69 32.10 28.38 31.40 34.88 30.70 41.29 4. Using the amount of air and the
1960 39.95 10.22 38.80 17.23 37.84 24.30 37.10 31.85 36.40 39.25 35.76 46.70 necessary discharge pressure
730 21.57 6.02 20.94 10.14 20.29 14.48 19.68 18.83 19.08 22.84 18.48 26.74 obtained from the above calculations,
RSR2 -200KS 880 26.52 7.11 25.78 12.22 25.14 17.46 24.43 22.70 23.87 27.53 23.44 32.23 determine your blower model, bore,
(200) $15,438
1100 34.24* 8.82 33.40 15.18 32.63 21.98 31.93 28.56 31.24 34.70 30.84 40.98 revolution, and shaft power referring
1470 47.85 11.71 46.98 20.36 45.87 29.27 44.99 38.12 44.42 46.57 43.84 55.38 to the Selection Chart.
800 36.82 9.75 35.86 16.43 34.81 23.47 33.95 30.51 33.09 37.01 32,23 43.33 5. Your selectable range can overlap
RSR2 -250KS 960 4.4.63 11.70 43.47 19.72 42.28 28.17 41.35 36.61 40.43 44.41 39.53 52.00 several models. It is recommended
(250) $26,085
1150 54.58 13.84 53.29 23.70 52.06 34.23 50.95 44.34 49.54 53.61 48.60 63.01 that one with a smaller model number
1350 64.99 15.90 63.61 27.52 62,29 39.74 61.10 51.77 60.02 63.18 59.18 74.98 be selected for cost economy, or one
800 74.64 20.81 71.85 30.73 69.81 44.04 67.88 57.36 66.26 70.67 64.65 84.15 with a larger model number be
RSR2 -300KS 960 91.31 24.37 88.39 36.98 86.23 53.40 84.35 69.87 82.61 86.15 80.78 102.14 selected for lower noise.
(300) $43,212
1150 110.48 29.20 107.47 44.52 105.15 64.48 103.07 84.53 101.13 104.43 99.5 124.5 6. For necessary motor output, refer to
1350 130.99 34.27 128.05 52.52 125.29 76.06 123.17 100.01 121.21 123.93 119.7 148.4 required power (La) in the Selection
Chart.
NOTE
The motor must be selected with 10 to 20% margin from the required power (La in kW).
The standard condition is defined as a temperature of 20°C, absolute pressure of 101.3kPa, and relative humidity of 70%.
For blowers with a discharge bore diameter of 80 to 250mm, the 3-lobe spur rotor can be exchanged with a helical rotor (option).
In case of operating at 0.6kg/cm2 (58.8kPa), if you need a larger model, contact
Full Aussie
data sheets
Pumps with performance curves available for application selection
970 48.3 43.0 47.1 52.6 46.1 62.6 45.0 72.5 44.1 82.8
RSR2-200LWKS 1100 56.3 48.7 55.1 60.0 54.0 71.1 52.9 82.4 51.7 93.5
16 $26,355
(200) 1180 60.7 52.1 59.5 64.2 58.3 76.0 57.1 88.2 55.9 100.4
1470 77.0 64.8 75.6 80.1 74.3 95.3 73.0 110.3 71.7 125.5
1750 93.5 77.4 92.0 95.5 90.7 113.4 89.2 131.9 87.9 150.1
880 79.1 68.8 77.6 85.0 76.1 100.5 74.8 116.3 73.5 132.0
RSR2-250WKS 980 89.9 76.7 88.3 94.7 86.8 112.0 85.4 129.5 84.1 147.0
18 $48,045
(250) 1150 107.5 90.4 105.5 111.0 103.8 131.3 102.2 151.5 100.7 171.1
1280 122.2 100.8 120.3 123.7 118.4 146.0 116.4 167.8 114.7 189.1
730 94.8 82.8 92.9 102.7 91.2 122.6 89.5 141.9 87.8 161.4
800 105.9 90.1 103.9 111.9 101.9 133.2 100.3 154.4 98.7 175.7
RSR2-300WKS
880 118.4 98.1 116.1 121.9 114.1 145.0 112.5 168.8 111.1 192.2 20 $65,418
(300)
980 134.4 108.3 132.1 134.3 130.2 160.2 128.3 186.4 126.6 213.1
1150 161.9 127.2 159.4 157.3 157.2 187.1 155.1 216.2 153.5 246.4
580 162.6 141.0 159.3 173.4 156.0 205.9 153.2 237.1 150.5 269.2
650 186.7 155.5 183.7 191.9 180.4 226.9 177.4 261.7 175.1 298.3
RSR2-350WKS
700 206.8 168.8 203.5 207.2 200.5 245.7 198.3 284.7 195.3 322.2 25 $119,808
(350)
750 226.3 180.0 222.6 220.9 219.7 262.5 217.0 303.9 214.3 344.5
800 246.8 191.2 242.8 235.3
Full data sheets
239.1 278.2
with236.3
performance
321.3
curves233.7
available for application selection
365.0
KE series
Width of
Bar spacing Capacity Height Water Way Install Weight
Model S/code mm m3/h mm ( mm) Angle kgs List Price
TUT-KE-200S-2 2.0 26 $9,683
KE-200S TUT-KE-200S-2.5 2.5 31 510 300 ~ 400 60˚ 32 $9,683
TUT-KE-200S-5 5.0 41 $9,555
TUT-KE-200M-2 2.0 36 $15,901
KE-200M TUT-KE-200M-2.5 2.5 46 685 300 ~ 400 60˚ 38 $15,901
TUT-KE-200M-5 5.0 58 $15,425
TUT-KE-200L-2 2.0 49 $18,639
KE-200L TUT-KE-200L-2.5 2.5 62 865 300 ~ 400 60˚ 42 $18,639
TUT-KE-200L-5 5.0 78 $17,467
KS series
Width of
Bar spacing Capacity Height Water Way Install Weight
Model S/code mm m3/h mm ( mm) Angle kgs List Price
TUT-KS-200Z-1 1.0 16 $14,892
TUT-KS-200Z-2 2.0 26 $13,091
KS-200Z 520 330 ~ 400 60˚ 33
TUT-KS-200Z-2.5 2.5 31 $13,091
TUT-KS-200Z-5 5.0 41 $12,776
TUT-KS-200Y-1 1.0 29 $18,355
TUT-KS-200Y-2 2.0 47 $16,887
KS-200Y 760 400 ~ 500 60˚ 49
TUT-KS-200Y-2.5 2.5 56 $16,887
TUT-KS-200Y-5 5.0 74 $16,488
TUT-KS-300Y-1 1.0 43 $21,686
TUT-KS-300Y-2 2.0 70 $19,885
KS-300Y 760 500 ~ 600 60˚ 54
TUT-KS-300Y-2.5 2.5 84 $19,885
TUT-KS-300Y-5 5.0 110 $19,486
TUT-KS-200S-1 1.0 17 $20,084
TUT-KS-200S-2 2.0 28 $19,486
KS-200S 800 330 ~ 400 45˚ 47
TUT-KS-200S-2.5 2.5 31 $19,486
The KM/KMA series ….
TUT-KS-200S-5 5.0 47 $19,220
rear-type mechanical bar screens
TUT-KS-200M-1 1.0 25 $23,348
WATER TREATMENT
TUT-KW6038_1(S) 1 56
TUT-KW6038_2(S) 2 95
KW-6038 380 842 506 774 500-600 60° 36.5 $9,025 $11,593
TUT-KW6038_2.5(S) 2.5 109
TUT-KW6038_5(S) 5 153
TUT-KW4049_1(S) 1 39
TUT-KW4049_2(S) 2 66
KW-4049 490 1057 722 544 300-400 60° 31.8 $8,810 $11,366
TUT-KW4049_2.5(S) 2.5 76
TUT-KW4049_5(S) 5 105
TUT-KW5049_1(S) 1 60
TUT-KW5049_2(S) 2 101
KW-5049 490 1057 722 650 400-500 60° 37.1 $9,025 $11,593
TUT-KW5049_2.5(S) 2.5 117
TUT-KW5049_5(S) 5 164
TUT-KW6049_1(S) 1 81
TUT-KW6049_2(S) 2 138
KW-6049 490 1057 722 774 500-600 60° 42.3 $9,440 $11,799
TUT-KW6049_2.5(S) 2.5 158
TUT-KW6049_5(S) 5 223
Add S after s/code for 316 ss version Full data sheets with performance curves available for application selection
WATER TREATMENT
Full data sheets with performance curves available for application selection
6” & 8”
options Performance at 2900 rpm
available
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Specs subject to change without notice Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Page 47
March 2017 | Issue 2
High head options … for transfer of fuel oils long distances or up a steep gradient
G3TMK-A ATEX4 EABL 3ɸ, 415V 4 55 35 800 8 118 280x650x410 $5,169
G3TMK-A ATEX5.5 EABM 3ɸ, 415V 5.5 55 40 910 10 127 280x670x410 $5,759
3” x 3” G3TMK-A ATEX
G3TMK-A ATEX7.5 EABN 3ɸ, 415V 7.5 55 44 850 13 142 280x670x410 $6,196
G3TMK-A ATEX11 EABP 3ɸ, 415V 11 55 55 1100 16 196 280x720x410 $7,980
1” BKQ-A Motor Pumps for Oil/Diesel Fuel Transfer (Not ATEX certified)
Designed for systems requiring high flow i.e. dump truck or crawler tractor fast refuelling in the field. Viton seals fitted.
Aussie Dispenser …. complete fuel station wall mounted steel plate, with flow metre, Auto stop nozzle gun (CAT# 6793) option
Just add diesel fuel and the dispenser does maximum flow to 35 litres per minute, hose available for no spill fuel transfer.
the rest. Kit includes Domus pump, set up on and aluminium nozzle gun.
Global Leader
4. SUBMERSIBLE PUMP TROUBLESHOOTING GUIDE
To prevent serious accidents, disconnect the power supply before inspecting the pump.
50Hz model operated at 60Hz Check name plate and replace the pump
Pump is picking up too much sedi- Raise pump to prevent it from picking up sediment
ment
Hose is kinked or clogged Minimize the number of bends in hose. Place pump in
meshed basket if a large amount of debris is present in
water
Full data sheets with performance curves available for application selection
All prices exclude gst, ex Sydney warehouse
Page 50 Australian Pump Industries (www.aussiepumps.com.au) - 02 8865 3500 Specs subject to change without notice
March 2017 | Issue 2
▪ Pump sets, pressure cleaners or sprayers, or any other product, not ▪ Warranty is deemed to apply to failures due to faulty workmanship or
listed as a standard product in the catalogue may be manufactured by materials and does not apply to fair wear and tear, improper
Aussie Pumps against specific customer order and specification. installation or application, the user’s failure to carry out maintenance,
These units are not eligible for return under the stock swap program. or as a result of the product’s use for purposes for which it was not
designed.
▪ It is the purchaser’s responsibility to satisfy itself of the suitability of
any special order products being built by Aussie Pumps for the ▪ Aussie Pumps is not liable for any loss of profit or consequential or
buyer’s purpose based on the information provided by Aussie Pumps indirect special loss arising from defects in any of its products.
in its quotation. ▪ Aussie Pumps will not be liable for damage or injury of any kind
▪ Special orders as described above are irrevocable and not subject to whatsoever arising directly or indirectly from product defects.
cancellation or deferment. ▪ Aussie Pumps’ liability under the terms of the company’s guarantee
▪ Warranties applicable to special order products as described above or warranty is limited to any one of the following:
are the same as that which applies to all standard Aussie Pumps ▪ replacement of the product with a suitable equivalent
product, other than for those items supplied to Aussie Pumps by third
parties for which Aussie Pumps will assign the original supplier’s ▪ repair of the product
warranty to the buyer of the “special order product”. ▪ return of the product for refund of purchase price
Goods Returned Policy ▪ payment for the cost of having the product repaired
▪ Return of goods for credit will not be accepted without our prior ▪ supply of replacement services
written approval. There is no obligation on the part of Australian
Pump to accept goods returned for credit without prior approval. ▪ payment of the cost of having services supplied again
Return authority label must be attached to outside of box. Return is ▪ Aussie Pumps reserves the right to choose the lowest cost option
conditional upon the products being returned; of the above.
▪ Freight prepaid in unused condition and in original packaging.
Obsolete products are not eligible for return.
N.B. All prices are ex works Castle Hill warehouse. If purchaser chooses to
▪ Products returned for credit must be unsoiled, undamaged, in use our carrier insurance is purchaser’s responsibility. We do offer
resalable condition and not more than 12 months old. freight insurance at 2% of the value of the goods shipped.
▪ All returned products must be accompanied by a copy of the DEMONSTRATION/FIELD DAY STOCK - In the event that goods are loaned
original delivery docket. to a customer for demonstration or display, the customer is responsible
for return of the goods in BRAND NEW CONDITION. Any parts, labour or
▪ A written statement including the original invoice number, the
packaging required to put the loaned items back into brand new condition
date of purchase and full reasons for the return.
will be charged to the customer at normal rates.
▪ Credit value of the goods returned will be at the absolute discretion N.B. The customer is deemed to be the person / customer to whom
of Aussie Pumps and will be limited to the original amount invoiced Australian Pump Industries loans the goods.
for that product. A restocking charge, the amount of which shall be at
the absolute discretion of Aussie Pumps but will be not less than 15%
of the original price of the product, will be applied to cover restock, Due to our program of continuous product development Australian Pump
repackaging, documentation and administration charges. reserves the right to alter specifications without notice.
Incorrectly Supplied, Missing or Damaged Goods
▪ Aussie Pumps must be notified, in writing, within three (3) working Note:
days of delivery of any goods incorrectly supplied so that prompt
Our goods come with guarantees that cannot be excluded under the
replacement with the correct products can be arranged.
Australian Consumer Law. You are entitled to a replacement or refund for
▪ All deliveries should be inspected for missing or damaged goods a major failure and for compensation for any other reasonably foreseeable
before the buyer signs for the goods. Missing or damaged goods loss or damage. You are also entitled to have the goods repaired or
should be noted on the consignment note. Any claims for missing replaced if the goods fail to be of acceptable quality and the failure does
goods or for products supplied in damaged condition must be not amount to a major failure.
reported to Aussie Pumps, in writing, within three (3) working days The benefits under the Aussie Pump warranty are in addition to other
for the claim to be considered. N.B. Our terms are ex works. Claims rights under Australian Consumer Law.
for damage in transit will not be considered.
Page 51
Australian Pump Industries Pty Ltd
ABN: 79 061 619 234
7 Gladstone Road, Castle Hill NSW 2154
(02) 8865 3500
www.aussiepumps.com.au info@aussiepumps.com.au
Prices valid from 9/03/2017, subject to change without notice,
all prices exclude GST, ex Sydney warehouse
API_TSUR_CAT/17