Professional Documents
Culture Documents
CSA Z245.1 Product Ordering
CSA Z245.1 Product Ordering
1
4.1 Product ordering requirement
4.1.1 Standard requirements
a CSA Standard designation and year of publication
b Quantity
c Grade
d Category (C 1.2.3)
e Specified pipe test temperature for Cat 2 (C 8.4.2)
f Process of pipe manufacture (C 1.1)
g Specified outside diameter (C 1.2.1)
h Specified wall thickness (C 10.1.1)
i Nominal length (C 10.5)
j End finish (C 10.7)
k Delivery date and shipping instructions
Note
1 Heat, identifying pipe number and pipe length to be clearly stencilled on inside of pipe at each end in addition
to other marking requirements.
2 Maximum carbon equivalent of CE=0.4.
3 The manufacturer shall supply all mill test certificates, chemical, check and ladle reports for each heat of steel
and all MTRs including hardness value.
4 Refer attached TNPI Engienering Standard 6 - Purchasing
CSA Z245.1-14
144m
359 Mpa
2
(-45) C
ERW
273.1mm
7.80mm
18m (TRL)
Plan end, bevelled
Octorber 3rd week to Dorval, QC
tificates, chemical, check and ladle reports for each heat of steel