Professional Documents
Culture Documents
Elementos Finitos Placa 2.2
Elementos Finitos Placa 2.2
Elementos Finitos Placa 2.2
ANSYS - PLACA
CODIGO: 201921004602
1:TITLE
AUTHOR
REPORT NO:
DRAWING/PART - MECHANICAL ENGINEERING
NO:
MODEL
Number of nodes: 142
Number and type of elements: square mesh
MODEL DETAILS
DOF: degrees of freedom 1
Type of analysis: linear static
MATERIAL DATA
LOAD
CONSTRAINS
NODOS OCTAGONAL TRIANGULAR TAMAÑO
Stress Stress (In)
142 1976 1792,3 1.2
210 1985 1945 1
317 2026,8 1740,2 0,8
RESULTS
664 2143,7 1974 0,6
2537 2242,7 2203 0,4
3162 2256 2193 0,2
3961 2248 2245 0
• Once the efforts and the nodes have been obtained, the
convergence table will be carried out in which the indication
of the results will be shown a little clearer.
Finally we can say that the design of a structural steel plate
was made taking into account all the necessary measures,
the behavior of the piece was evaluated based on its
simulation, the modeling and malleo of the piece, and thanks
to this it was obtained different data that the program through
CONCLUSIONS which can tell us that the piece does not show structural
steel failures, since the creep of the material is not exceeded
by seeing it previously in the graph and thus verify that it
does not exceed the creep limit in psi shown in the ansys
https://e-archivo.uc3m.es/bitstream/handle/10016/11571/
PFC_Adrian_Martin_Rodriguez.pdf;jsessionid=DD0D327130
62B92640B329602D24F4C7?sequence=1
https://previa.uclm.es/profesorado/evieira/ftp/apuntes/
ansys9.pdf
https://mecanica-usach.mine.nu/media/uploads/clase-gid-
REFERENCE mallas.pdf