Professional Documents
Culture Documents
7-LINE® - 7-374 SERIES: Product Data Sheet
7-LINE® - 7-374 SERIES: Product Data Sheet
DESCRIPTION
One-component, int./ext. semi-gloss acrylic metal finish
PRINCIPAL CHARACTERISTICS
• Waterborne acrylic enamel
• Formulated especially as a metal topcoat
• Excellent color and gloss retention
• Soap and water clean up
Note: Use PITTSBURGH paints custom colorants and refer to THE VOICE OF COLOR formula book for tinting instructions
Volume solids 34 ± 3%
Recommended dry film thickness 1.5 - 2.0 mils (38 - 50 µm) depending on system
Theoretical spreading rate 364 ft²/US gal for 1.5 mils (8.9 m²/l for 38 µm)
Notes:
- See ADDITIONAL DATA – Overcoating intervals
- See ADDITIONAL DATA – Curing time
Warning
Removal of old paint by sanding, scraping or other means may generate dust or fumes which contain lead. EXPOSURE TO
LEAD DUST OR FUMES MAY CAUSE ADVERSE HEALTH EFFECTS, ESPECIALLY IN CHILDREN OR PREGNANT WOMEN.
Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a
properly fitted and approved (e.g., NIOSHapproved) respirator and proper containment and cleanup. For additional information,
contact the USEPA/Lead Information Hotline at 1-800-424-LEAD or the regional Health Canada office
SYSTEM SPECIFICATION
• Primers for concrete/masonry: 4-603, 4-808
• Primers for ferrous metal: 90-712, 6-208, 6-212
• Primers for galvanized steel: 6-209, 90-712
• Primers for non-ferrous metals: 90-712, 6-204
• Primers for drywall: 6-2, 9-900, 17-921
• Primers for exterior wood: 6-609, 6-9
Application
• Area should be sheltered from airborne particulates and pollutants
• Avoid combustion gases or other sources of carbon dioxide that may promote ambering of light colors
• Ensure good ventilation during application and curing
• Provide shelter to prevent wind from affecting spray patterns
• Avoid exterior painting late in the day or when dew or condensation are likely to form or if rain is expected
Material temperature
Material temperature during application should be between 50°F (10°C) and 90°F (32°C)
Airless spray
• 28:1 pump or larger
Recommended thinner
Tap water
Volume of thinner
0 - 5%
Nozzle orifice
0.015 – 0.017 in (approx. 0.38 – 0.43 mm)
Nozzle pressure
19.3 MPa (approx. 193 bar; 2800 p.s.i.)
Brush/roller
• Use a high quality polyester/nylon brush and/or a high quality 3/8" nap roller. In hot or dry conditions, layoff lightly rolling
with 3/8" nap roller cover. Multiple coats may be required to achieve specified film thickness
Recommended thinner
Tap water
Volume of thinner
0 – 5%
Cleaning solvent
Soap and water
ADDITIONAL DATA
Product Qualifications
• Meets MPI Category #153, Interior W.B. Light Industrial Coating, semi-gloss, level 5
DISCLAIMER
SAFETY PRECAUTIONS
• For paint and recommended thinners see INFORMATION SHEETS 1430, 1431 and relevant Material Safety Data Sheets
• Although this is a waterborne paint, care should be taken to avoid inhalation of spray mist, as well as contact between the
wet paint and exposed skin or eyes
Danger
Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool or waste in a sealed water-filled metal container. Refer to
www.pittsburghpaints.com, Spontaneous Combustion Advisory for additional information
WORLDWIDE AVAILABILITY
It is always the aim of PPG Protective and Marine Coatings to supply the same product on a worldwide basis. However, slight
modification of the product is sometimes necessary to comply with local or national rules/circumstances. Under these
circumstances an alternative product data sheet is used.
REFERENCES
• CONVERSION TABLES INFORMATION SHEET 1410
• EXPLANATION TO PRODUCT DATA SHEETS INFORMATION SHEET 1411
• SAFETY INDICATIONS INFORMATION SHEET 1430
• SAFETY IN CONFINED SPACES AND HEALTH SAFETY, EXPLOSION HAZARD – INFORMATION SHEET 1431
TOXIC HAZARD
WARRANTY
PPG warrants (i) its title to the product, (ii) that the quality of the product conforms to PPG’s specifications for such product in effect at the time of manufacture and (iii) that the product shall be delivered free of the
rightful claim of any third person for infringement of any U.S. patent covering the product. THESE ARE THE ONLY WARRANTIES THAT PPG MAKES AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, UNDER
STATUTE OR ARISING OTHERWISE IN LAW, FROM A COURSE OF DEALING OR USAGE OF TRADE, INCLUDING WITHOUT LIMITATION, ANY OTHER WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE,
ARE DISCLAIMED BY PPG. Any claim under this warranty must be made by Buyer to PPG in writing within five (5) days of Buyer’s discovery of the claimed defect, but in no event later than the expiration of the
applicable shelf life of the product, or one year from the date of the delivery of the product to the Buyer, whichever is earlier. Buyer’s failure to notify PPG of such non-conformance as required herein shall bar
Buyer from recovery under this warranty.
LIMITATIONS OF LIABILITY
IN NO EVENT WILL PPG BE LIABLE UNDER ANY THEORY OF RECOVERY (WHETHER BASED ON NEGLIGENCE OF ANY KIND, STRICT LIABILITY OR TORT) FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IN ANY WAY RELATED TO, ARISING FROM, OR RESULTING FROM ANY USE MADE OF THE PRODUCT. The information in this sheet is intended for guidance only and is based upon
laboratory tests that PPG believes to be reliable. PPG may modify the information contained herein at any time as a result of practical experience and continuous product development. All recommendations or
suggestions relating to the use of the PPG product, whether in technical documentation, or in response to a specific inquiry, or otherwise, are based on data, which to the best of PPG’s knowledge, is reliable. The
product and related information is designed for users having the requisite knowledge and industrial skills in the industry and it is the end-user’s responsibility to determine the suitability of the product for its own
particular use and it shall be deemed that Buyer has done so, as its sole discretion and risk. PPG has no control over either the quality or condition of the substrate, or the many factors affecting the use and
application of the product. Therefore, PPG does not accept any liability arising from any loss, injury or damage resulting from such use or the contents of this information (unless there are written agreements
stating otherwise). Variations in the application environment, changes in procedures of use, or extrapolation of data may cause unsatisfactory results. This sheet supersedes all previous versions and it is the
Buyer’s responsibility to ensure that this information is current prior to using the product. Current sheets for all PPG Protective & Marine Coatings Products are maintained at www.ppgpmc.com. The English text of
this sheet shall prevail over any translation thereof.
AVAILABILITY
Packaging
1-gallon and 5-gallon kits
Notes:
- * Must be tinted before use. Use PITTSBURGH® Paints Custom Colorants and refer to THE VOICE OF COLOR® formula book for
tinting instructions
- Refer to the appropriate color formula book, automatic tinting equipment, and/or computer color matching system for color formulas
and tinting instructions
The PPG logo, and all other PPG marks are property of the PPG group of companies. All other third-party marks are property of their respective owners.