Professional Documents
Culture Documents
Steel Interstop Stopper Rod Mechanism Type SRM L 1812 en 181206 Mon
Steel Interstop Stopper Rod Mechanism Type SRM L 1812 en 181206 Mon
Overview Stopper rod mechanism especially designed for Installation & operational features Integrated INTERSTOP® system package
• Stopper rod mechanism especially designed for casting application on casting ladle • Easy stopper alignment due to horizontal guidance • Fact finding on site
ladles • Sturdy design of the stopper rod mechanism (2-axis) • Engineering for system and refractories
• Precise system for automatic actuation • Stopper rod mechanism with limited mechanical play • Specially designed for stopper rod assembly into a • Customer-tailored refractory solutions
• Electrical and hydraulic actuators available, manual offering precise reaction, minimal maintenance and long preheated casting ladle • Documentation
operation possible at any time service times of components • Lever allows a convenient working position • Commissioning
• Easy installation and operation • Stopper arm with integrated air-cooling (i.e. connected • After sales service
• Special locking system for safe ladle transfer and during ladle preheating) Flexible drives
slag tilting • Bearings suitable for high temperatures • Electric and hydraulic actuators available
• Very reliable vertical-movement locking system – • In case of power failure, immediate manual operation
designed for a safe ladle transfer and slag tilting possible
Stopper arm
Clamping unit
Drive holder
Base plate
Main carrier
Drive
HUB/STROKE +/-60
Manual drive
879.5
30
HUB/STROKE +/-60
1840
765
Counter weight
405
HUB/STROKE +/-60
Lever
555.5
483
1423
Hydraulic Electric
drive drive
2 S T E E L / F LOW C O N T R O L T E C H N O LO G Y
Imprint:
Media owner and publisher: RHI Magnesita GmbH, Kranichberggasse 6, 1120 Vienna, Austria
Produced by: RHI Magnesita – 12 / 2018-10-EN
Place of publication and production: Vienna, Austria
Copyright notice:
The texts, photographs and graphic design contained in this publication are protected by copyright. Unless indicated
otherwise, the related rights of use, especially the rights of reproduction, dissemination, provision and editing, are held
exclusively by RHI Magnesita. Usage of this publication shall only be permitted for personal information purposes. Any
type of use going beyond that, especially reproduction, editing, other usage or commercial use is subject to explicit
prior written approval by RHI Magnesita.
Stopinc Aktiengesellschaft
Bösch 83a, 6331 Hünenberg, Switzerland
T +41 41 785 75 00 F +41 41 785 75 01
E interstop@rhimagnesita.com
RHI MAGNESITA
Kranichberggasse 6, 1120 Vienna, Austria
T +43 50213 0 F +43 50213 6213
E steel@rhimagnesita.com
rhimagnesita.com