Professional Documents
Culture Documents
fC56520 CanBusCheck
fC56520 CanBusCheck
Concern: Transmission in “Limp Home Mode”, erratic data shown on the digital monitor or
cluster instrument.
Knowledge
CAN BUS LINE CHECK
Search Text:
Action: The CAN BUS Line consists of 2 wires connecting two or three electronic control
units (ECU):
• the Transmission controller (ZF EST37)
• the Brown Box controller (CAN machine interface)
• the Engine controller (EDC7 – W170 and W190 only).
Instability of the CAN BUS Line can lead to erratic behaviour of the machine
(Transmission in “Limp Home Mode”, erratic data shown on the digital monitor or
cluster instrument).
Specific resistance values between the two wires on the three branches of the CAN
BUS Line are necessary for the stability of the line and a correct data exchange
between the three ECU.
This line has a triple connector CAN_SPL (see FIG1 and FIG2) placed in the cab
electrical compartment, behind the operator seat.
CE Heavy Wheel Loader 2007-007 THIS SERVICE NEWS AND UPDATE IS FOR INFORMATION ONLY
2007 CNH All rights reserved
Page 1/2
CE Product Support
Status: If information within this SNU is suitable for a dealer, a dealer can be given the
text contained in the Knowledge Search Text box above. The dealer can then
find the information himself within Knowledge.
Warranty: Normal warranty terms and conditions apply.
CE Heavy Wheel Loader 2007-007 THIS SERVICE NEWS AND UPDATE IS FOR INFORMATION ONLY
2007 CNH All rights reserved
Page 2/2