The minutes document the installation and commissioning of an ultimo system in 6 machines at PK Laxmi Mills India Pvt Ltd by Premier Evolvics P Ltd. The work included connecting the machines to an existing coordinator, training staff, and handing over spare parts. After commissioning, the overall functions and performance of the 6 machines with the new ultimo system were observed to be working satisfactorily.
The minutes document the installation and commissioning of an ultimo system in 6 machines at PK Laxmi Mills India Pvt Ltd by Premier Evolvics P Ltd. The work included connecting the machines to an existing coordinator, training staff, and handing over spare parts. After commissioning, the overall functions and performance of the 6 machines with the new ultimo system were observed to be working satisfactorily.
The minutes document the installation and commissioning of an ultimo system in 6 machines at PK Laxmi Mills India Pvt Ltd by Premier Evolvics P Ltd. The work included connecting the machines to an existing coordinator, training staff, and handing over spare parts. After commissioning, the overall functions and performance of the 6 machines with the new ultimo system were observed to be working satisfactorily.
The minutes document the installation and commissioning of an ultimo system in 6 machines at PK Laxmi Mills India Pvt Ltd by Premier Evolvics P Ltd. The work included connecting the machines to an existing coordinator, training staff, and handing over spare parts. After commissioning, the overall functions and performance of the 6 machines with the new ultimo system were observed to be working satisfactorily.
Installation and commissioning of ultimo Ultimo system installed in all the 06 machines 1 system in 06 machines (LR G5/1) with from M/C no: 3 to 5 and 12 to 14. Then commis- 1008 spindles each machine.[Sl. Nos: sioned the same as per our standard work instruc- 9940 and 10027 to 10031] tion. This 6 machines connected with existing coor- dinator number 3.
The status board and Thin client location
2 New status board fixed near to the ma- chine 18 and existing status board, new wall mounting clamp and new thin client hand
over to the stores.
Ultimo features like end breaks lamp, MDU and power module enabled and working fine. Ultimo maintenance app installed in SM and supervisor mobile to explained the stop code entry and count change procedure. Ultimo software Training was given to all department peoples and sensor handling training was given to electrical department
Ultimo Spares Received spares with 6 machines
3. 12 cm sensors - 78 Nos. 18 cm sensors - 57 Nos. 25 cm sensors - 7 Nos. Master PCB -4 Nos. Slave PCB -8 Nos. Relimate cable - 10 Nos. Power cable -2 Nos. Coupling bracket - 1No.
Sl.No Nature of Work Action Taken
Ind.Prox.Sensor - 1 No. Following Spares are used for the old ma- chines by customer. 12 cm sensors -78 Nos. 18 cm sensors - 57 Nos. 25 cm sensors -7 Nos. Relimate cable -7 Nos. Power cable - 1 No. Slave PCB - 4 Nos. Remaining spares hand over to customer.
After commissioning, observed the overall
Conclusion functions and working performance of all 06 machines. Now system is working satisfac- 4 torily
For PK Laxmi Mills India Pvt Ltd For Premier Evolvics P Ltd