Premium lithium soap grease including solid lubricants with excellent lubricating capabilities for metal-on-metal friction under heavy loads at slow to fast speeds
Features Typical properties
• Superior load-carrying capability Specification writers: These values are not intended for use in • Extended time possible between applications preparing specifications. Please contact your local MOLYKOTE® • Good oxidation resistance sales representative prior to writing specifications on this product. • Can provide lubrication under conditions where Standard(1) Test Unit Result it is difficult to create oil film • Reduces wear Appearance Black • Superior water resistance JIS K 2220 Penetration mm/10 265 to 295 • Superior corrosion resistance (worked 60 times) • Prevents fretting corrosion NLGI class 2 JIS K 2220 Drop point °C 185 Composition Service temperature °C -30 to 130 range(2) • Mineral oil • Lithium soap JIS K 2220 Bleed (100°C 24 hours) % 2.0 • Solid lubricants JIS K 2220 Evaporation % 0.2 • EP additives (99°C 22 hours) • Corrosion inhibitor JIS K 2220 Oxidation resistance MPa 0.03 (99°C 100 hours)
Applications JIS K 2220 Water washout % 1.0
(38°C/1 hour) Ideally suited for roller bearings, slide bearings, guides, roller Shell four ball test OK N 3,150 guides, ball joints, splines, small low-speed gears, and as an load automotive chassis grease. Wear scar mm 1.2 (1 hour, 800 N) How to use DIN 51821- FAG bearing test, type hours 40 02-A FE9 (6,000 rpm, 130°C, Clean points of contact. As is usual with lubricating greases, 4,500 N) apply or fill by means of a brush, spatula, or automatic lubrication DN value mm/min 450,000 device. Corrosion resistance test Can also be used in a centralized lubrication system. ASTM Humidity corrosion 1 (None) D1743 SKF Emcor test 0 (None) Handling precautions (1) JIS: Japanese Industrial Standard. ASTM: American Society for Testing PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE and Materials. DIN: Deutsche Industrie Norm. USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE (2) Up to 150°C for short periods of time. HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.