Professional Documents
Culture Documents
TDC En24
TDC En24
EN 24
1. TDC No : TDC/General/01 Prelim.00. Dt.23.04.2022
2. Material Specification : BS970-3 : 1991 (Gr.817M40)
CHEMICAL PROPERTIES
Composition%
Element
Minimum Maximum
Carbon 0.36 0.44
Silicon 0.10 0.40
Manganese 0.45 0.70
Phosphorous --- 0.035
Sulfur --- 0.04
Chromium 1.00 1.40
Molybdenum 0.20 0.35
Nickel 1.30 1.70
MECHANICAL PROPERTIES
Page 1 of 2
NCON TURBO TECH PVT LTD
# F-62 & F-63, Industrial Estate, Rajaji nagar
Bangalore – 560044
EN 24
1. TDC No : TDC/General/01 Prelim.00. Dt.23.04.2022
2. Material Specification : BS970-3 : 1991 (Gr.817M40)
Cooling
Process ‘T’ Condition ‘U’ Condition ‘V’ Condition Holding Time
Medium
Holding time
Normalizing 840 840 840 Air 1 min. /mm of
thickness.
Holding time
Quenching 850 – 860 850-860 850-860 Oil 1 min. /mm of
thickness.
Holding time
2.5 min. /mm
Tempering 660 630 610 Air
of thickness.
Or min. 1 hrs.
Notes:
1. The Heat Treatment Process flow should be Normalizing, Rough Machining, Quenching, and Tempering followed by
Proof Machining.
2. UT should be carried out as per ASTM A388 straight beam examination using DGS scale with acceptance of Ø3 mm
FBH or equivalent.
3. The Hardness variation of the Final Component should be maximum of 20 BHN.
PREPARED BY APPROVED BY
Page 2 of 2