Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

FEDERAL PAINTS MANUFACTURING (M) SDN BHD (381688-T)

Office : 21, Persiaran Desa Ampang 1, Taman Sri Ampang,


68000 Ampang, Selangor.
Tel : 03-4292 4684 Fax : 03-4291 5303
Factory : Lot 3,Batu 13, Simpang Balak, 43000 Kajang, Selangor. Email: info@federalpaint.com.my
Tel : 03-8737 8826 Fax : 03-8737 8876 Website: federalpaint.com.my

TECHNICAL DATA SHEET NO: FS19


FELTEC ROAD MARKING PAINT
Reflective & Non- Reflective Road Marking Paint

PRODUCT DESCRIPTION Feltec Road Marking Paint is a quick drying synthetic paint with exceptional
durability. It is specially designed to maximize abrasion and chemical resistance.

TECHNICAL INFORMATION
Colour White (R & NR), Black (NR) and Yellow (R & NR)
Finish Reflective (R) and Non-Reflective (NR)
Flash Point About 23°C

RECOMMENDED USE
Feltec Road Marking Paint is specially designed for the marking of road,
car park, factories, schools, etc.

PRODUCT DATA
Recommended Dry film Thickness 30 ~ 40 microns
Drying times Touch Dry : 20 minutes
Hard Dry : 1 hour
Recoat Min : 1 hour
Theoretical coverage 9 – 10 m² / liter per coat
Volume Solids Approx. 50 ~ 60%

APPLICATION DATA
Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required,
add 5% of Federal General Thinner MO-475 for easy application.
Thinner/cleaner Federal General Thinner MO-475
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material,
dirt, grease or wax.

SHIPPING, STORAGE & PACKAGING


Storage The product should be kept in a cool and well ventilated place protected
from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months.
Packing Size 5 liters

SAFETY PRECAUTION
* This product is flammable. Keep away from sources of ignition.
Keep container tightly and keep out of reach of children.
* Wear suitable personal protective clothing such as overall during painting.
Ensure adequate ventilation. In case of insufficient ventilation during
spraying, wear suitable respiratory equipment and eye protection goggle.
Do not breathe or inhale mist.
* Avoid skin and eye contact. Spillage on skin should immediately be
removed with suitable cleanser, soap and water. Eyes should be well
flushed with water and seek medical immediately if discomfort persists.

DISCLAIMER Federal Paint believes that the data contained herein are factual.
The data are not to be taken as a warranty or representation for which
Federal Paint assumes legal responsibility. We reserve the right to change
the given data without notice.

FP02@03/13

You might also like