Professional Documents
Culture Documents
WK 8. LO 3 Use Appropriate Hand Tools and Equipment
WK 8. LO 3 Use Appropriate Hand Tools and Equipment
Week 8
TLE_IAEPAS9-12UMHT-IIh-i-18
MULTIPLE CHOICE. (Direction: Choose the letter of the correct answer. Write the
letter on the space provided.)
__________ 1. Can you recall a technique of melting a soft metal to joint two pieces of
harder metal?
A. Electronics C. Soldering
B. Tinning D. Cabling
__________3. It is a process of coating the two surfaces to be joined with a thin layer of
solder to help the main mass of solder flow and melt into the joint.
A. Soldering C. Cabling
B. Tinning D. Electronics
A. Volt-ohm-milli-ammeter C. Volt-ohm-micrometer
B. Voltage-ohm-milli-ampere meter D. Voltage over meter
_________ 5. What differences exist between a zener diode’s and rectifier diode’s
electronics symbol?
A. Arrow C. anode
B. Junction D. cathode
A. C.
B. D.
__________ 9. The common power wattage of soldering iron for TV unit is?
__________ 10. What kind of splices we use when cabling twin leads wire?
A. western union splices C. Staggering splices
B. Fixture joint splices D. Rattail joint splices
__________ 11. What must have happen when the multitester is not accurate when you
measures voltage, resistance, and current?
A. Readings is not accurate C. Reading is nearly accurate
B. Reading is accurate D. None of the above
__________ 12. What is the difference between the analogue and digital multitester?
A. Cost and functions C. Appearance
B. Accuracy D. All of the above
__________ 15. What is happening to electronics component which has cold solder
joint?
A. Totally dead set C. Distorted output
B. Not functioning D. All of the above
__________ 16. What is the purpose and importance of fuse in electronics equipment?
A. It is a safety device
B. It’s protects a circuit for furthermore damage
C. It cut off power whenever there is an overloading
D. All of the above
__________ 17. What is the function of fuse in in electronics equipment?
A. Safety C. Connects power
B. Protection D. All of the above
__________ 18. If you will replace a defective fuse, what would be the best amperage
of a fuse?
A. Larger amperage C. The same amperage of the defective
fuse
B. Lower amperage D. All of the above
__________ 19. How could you determine a dead set electronics equipment?
A. No power C. Still functioning but distorted
B. With light indicator D. None of the above
__________ 21. Why is it need to clean the surface of a joint before applying a solder?
A. To make the joint strong
B. Solder will adhere to the surface easily
C. Because cleanliness is one of the factor which affect good soldering
D. All of the above
__________ 22. What factors would you choose which affect good soldering?
A. Cleanliness C. Adequate amount of solder
B. Right amount of temperature D. All of the above
__________ 23. What would happen if the amount of solder is not adequate?
A. Solder joint is very strong C. Solder joint is good
B. Solder joint is very weak D. All of the above
__________ 24. What would happen if the fuse in electronic equipment is defective?
A. Totally dead set C. No light indicator
B. No power D. All of the above
__________ 25. Why is it not suitable to use soldering gun to solder modern electronic
components?
A. It produce too much heat, it will damage the components
B. It produce low heat that makes a cold solder joint.
C. It is very bulky
D. None of the above
__________ 26. This group of PPE protects us against slippery floors, wet floors, sharp
objects, falling objects, chemical splashes and liquid metals aberration.
A. Helmets, bump caps
B. Gloves (gloves), armlets & mitts.
C. Safety shoes, safety boots & leggings.
D. Boiler suits, chemical suit, vest, apron, full body suits & jackets.
____________29. What trait refers to the ability to provide exact value or specification
in selecting replacement parts?
A. Availability B. Price C. Quality D. Tolerance
_____________ 32. A tool used to join two our more metal parts by melting lead.
A. Screw Drive B. Soldering Iron C. Long Nose Pliers D. Multitester
1. C
2. A
3. B
4. A
5. B
6. D
7. A
8. C
9. D
10. C
11. A
12. D
13. C
14. D
15. D
16. D
17. D
18. C
19. A
20. D
21. D
22. D
23. B
24. D
25. A
26. D
27. A
28. D
29. C
30. D
31. A
32. B
33. C
34. C
35. C
36. C
37. A
38. B
39. C
40. C