Professional Documents
Culture Documents
Multisim pw3
Multisim pw3
(1)
2 OBJECTIVE :
To analyze and simulate AC circuit .
3 THEORY :
PART A
Draw and simulate all the circuits in Figure 3.1, 3.2, 3.3 and 3.4 .
Sketch their input and output waveform in Result section.
Amplitude : 12V
Frequency : 50 Hz
AC Magnitude : 1V
AC Magnitude : 1V
Pulsed Value : 5
Rise time : 1ns
Fall time : 1ns
Pulse Width : 2.5m
Period : 5m
AC magnitude : 1V
Time / Value Pairs :
0s – 0V
1s – 0V
2s – 5V
3s – 5V
4s - -5V
5s - -5V
AC Magnitude : 1V
Rise delay time : 0.2 us
Rise time constant : 0.8us
Fall delay time : 1.2 us
Fall time constant : 0.8us
PART B
Draw and simulate the circuit in Figure 3.5.
Sketch the input and output waveform in Result section.
GND
PART A
a. Input and output waveform for Figure 3.1: The Diode Clipper Circuit
b. Input and output waveform for Figure 3.2: Relay Based Switch Circuit
c. Input and output waveform for Figure 3.3: Piece Wise Linear
d. Input and output waveform for Figure 3.4 : Exponential source setup circuit
PART B
Input and output waveform for Figure 3.5 : Full wave rectifier (bridge)
7 DISCUSSION :
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
8 CONCLUSION :
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
PRACTICAL WORK 3: TRANSIENT ANALYSIS
A
Waveform : Student
Edit title block: Draw circuit: Student Simulation setting:
able to produce the
Student able to able to draw the Student able to set
Circuit edit the title block circuit same as simulation settings
waveform with Marks
correct axis labels
correctly. given. correctly.
and values.
PART A
/12
3.1
PART A
3.2
/12
PART A
3.3
/12
PART A
3.4
/12
PART B
3.5
/12
MARKS /60
PART A /16
PART B /6
Discussion /5
Conclusion /3
MARKS /30