Professional Documents
Culture Documents
TVL CSS12 Q2 DW7
TVL CSS12 Q2 DW7
SECOND QUARTER
WORKSHEET No. 7
Configuring and Installing DHCP
Activity 1
1.
2.
3.
4.
5.
6.
II. Fill in the blanks the missing word. DHCP IP Address Allocation Procedure:
7. Client sends DHCP to entire network
8. Server send DHCP (IP settings)
9. Client Offered Settings
10. Server sends At this time, the DHCP
server transfers all the network configuration data
Activity 2
Step to install DHCP. Write the correct word on the space provided.
When the Add Roles Wizard comes up, you can click Next on that screen. Next,
select that you want to add the and click Next.
1
3. Network connection binding
Configure some basic IP settings and configure the first DHCP Scope. It was
shown the network connection binding and asked to verify
4 to 6 Entering domain and DNS information
The wizard is asking, “what interface do you want to provide DHCP services on?”
took the default and clicked Next. Next, entered
, and and clicked Next.
7 to 9 Adding a new DHCP Scope
Click Add to add a new scope. Name Scope (Scope name), configured
the and IP address and default
gateway, type of subnet (wired), and activated the scope.
10. Choose to Disable stateless mode for this server and click Next.
Then, confirmed DHCP Installation Selections (on the screen below) and
clicked Install.
Activity 3
True or False
Directions: Read each statement below carefully. Write T if the statement is correct
and F if wrong in the space provided.
1. DHCP is used so that you do not have to statically assign IP addresses to every
device on your network and manage the issues that static IP addressing can create.
2. When a client (PC) is booted, it broadcasts a DHCP Discover message over the
Ethernet network to locate all available DHCP servers on the different subnet network.
3. When a DHCP server receives the DHCP Discover message from the client, it
also broadcasts a DHCP Offer message over the Ethernet network.
4. DHCP offer network data, such as client IP address, subnet mask, default
gateway IP address, DNS IP address, IP lease time and DHCP server IP address.
5. IP address allocation procedure is request, discover, acknowledge, discover
respectively.
2
Key to Correction
Activity 1 Activity 2 Activity 3
I.
1. IP address 1. Add Roles 1. T
2. Subnet Mask 2. DHCP Server Role 2. F
3. Default gateway 3. Network Connection 3. T
IP address 4. Parent Domain 4. T
4. DNS Server IP 5. Primary DNS 5. F
address 6. Alternate DNS
5. Lease time 7. Starting
6. Server IP address 8. Ending
II. 9. Subnet
7. Discover 10. DHCPv6
8. Offer
9. Request
Acknowledge