Professional Documents
Culture Documents
Daily DLC Gradation Register
Daily DLC Gradation Register
IS Sieve (mm)
Wt. of Material Retained Cumm.Wt. of Material Cum. % of Material Retained Cum. % of Material Passing Specific Limit As per Morth
(gm) Retained (gm) (%) (%) Table No.-600-1
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
COMBINED FLAKINESS AND ELONGATION INDEX [As per IS 2386, (Part - I)]
IS Sieve Size
Weight of Aggregate Weight of Aggregate Weight of Aggregate
Total Weight of Aggregate
passing from thickness retained on thickness retained on length gauge
retained on Sieves
gauge gauge after retained on
(g)
Passing Retained (g) (g) thickness gauge (g)
mm mm W1 W2 W3 W4
63 50
50 40
40 31.5
31.5 25 - -
25 20
20 16
16 12.5
12.5 10
10 6.3
Total Weight
IS Sieve (mm)
Wt. of Material Retained Cumm.Wt. of Material Retained Cum. % of Material Retained Cum. % of Material Specific Limit As per Morth
(gm) (gm) (%) Passing (%) Table No.-600-1
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
IS Sieve (mm)
Wt. of Material Retained Cumm.Wt. of Material Retained Cum. % of Material Retained Cum. % of Material Specific Limit As per Morth
(gm) (gm) (%) Passing (%) Table No.-600-1
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
IS Sieve (mm) 26.5 mm 10 mm C.sand Combination of Fraction Specific Limit As per Morth
achieved Gradation Table No.-600-1
26.5 mm 10 mm C.sand
26.5 100
19.0 75-95
9.5 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
Average