Professional Documents
Culture Documents
2u DWDM Transmission System
2u DWDM Transmission System
Product overview
Product introduction
Picture 1. G-1000-2U-2-2A
2022 Rev.1.0 1 / 14
Product features
• Supporting CWDM / DWDM / EDFA / OLPS / OTAP and other business cards
hot-swapping mode.
bidirectional chain, star and ring types and other networking methods.
supply is optional.
2022 Rev.1.0 2 / 14
Product Specifications
Maximum capacity of
96 channels.
single system
Physical network
Chain type, Star type and Ring type.
topology
Network management
CLI, WEB, NMS.
mode
Safety and EMC Compliance with FCC, UL, CE, TUV, CSA standard.
2022 Rev.1.0 3 / 14
2. Network Management Unit (G-NMU)
Product overview
products. The NMU board uses high-speed ARM processor to provide powerful
WEB, CLI, SNMP), and also provides server version (server and client) and
Product introduction
Picture 2. G-NMU
2022 Rev.1.0 4 / 14
Product features
• Supports hot swap, which does not affect the normal operation of the
expansion card.
• Supports local and remote online upgrade without affecting the normal
• Supports in-band and out-of-band networking tubes and provides three SFP
optical ports, two RJ45 electrical ports, and one Console serial port.
graphics.
2022 Rev.1.0 5 / 14
Product Specifications
Working
-10℃ ~ 70℃.
temperature
Environmental Storage
-40℃ ~ 80℃.
requirements temperature
Relative
5% ~ 95% no condensation.
humidity
Product dimension 177(W) x 20(H) x 225(D) (mm).
Safety and EMC Compliance with FCC, UL, CE, TUV, CSA standard.
CLI (Telnet, Console, SSH), SNMP C/S architecture; supports access to third-
2022 Rev.1.0 6 / 14
Application 1: Out-of-band management
the NMU are gathered and transmitted to the NMU center through a third-party
network (such as the DCN or DNN network) to implement the unified out-of-
2022 Rev.1.0 7 / 14
Application 2: In-band management
the optical signal and service signal of the network management card. After the
signals or the network management optical signals are directly sent to the
2022 Rev.1.0 8 / 14
3. G-EDFA-mAxx/Gyy (EDFA board)
Product overview
EDFA amplifiers board uses high-quality pump lasers and unique APC
(automatic power control circuit) and ATC (automatic temperature control circuit)
GFF (gain flat filter), with excellent optical path design, so that its flatness and
noise are optimized. Three main types of amplifiers are available: Booster
saturation power of amplifier (xx) and maximum signal gain (yy) are
customizable.
Product introduction
Picture 5. G-EDFA-mAxx/Gyy
2022 Rev.1.0 9 / 14
Product features
power of -35dB.
amplifier.
• Monitor: pump drive current, pump output power, pump switch, pump
• Supports adjustable pump switch, AGC mode and APC mode (adjustable
2022 Rev.1.0 10 / 14
Product Specifications
2022 Rev.1.0 11 / 14
4. Mux/De-MUX (ODM)
Product overview
which can combine CWDM or DWDM channels for wave division, greatly saving
has higher spectrum utilization rate and saves frequency band resources. The
Product introduction
2022 Rev.1.0 12 / 14
Picture 7. AAWG MUX/DEMUX 1x40
Product features
bidirectional scenarios.
• Low insertion loss, high channel isolation, high reliability and stability,
2022 Rev.1.0 13 / 14
Product Specifications
CWDM: 1271nm~1611nm
Wavelength range
DWDM: C-Band (100GHZ and 50GHZ)
2022 Rev.1.0 14 / 14