Professional Documents
Culture Documents
Federal Register / Vol. 75, No. 35 / Tuesday, February 23, 2010 / Notices
Federal Register / Vol. 75, No. 35 / Tuesday, February 23, 2010 / Notices
Trademark Office, P.O. Box 1450, contact the appropriate source as listed and natural gas industries—Drilling
Alexandria, VA 22313–1450. for further information. and production equipment-Hoisting
Written comments and Exploration & Production: equipment, 4th Ed.
recommendations for the proposed RP 10B–6, Recommended Practice on Spec Q1–A1, Addendum 1 to
information collection should be sent on Determining the Static Gel Strength of Specification for Quality Programs for
or before March 25, 2010 to Nicholas A. Cement Formulations, 1st Ed. the Petroleum and Natural Gas
Fraser, OMB Desk Officer, via e-mail to RP 13D, Rheology and Hydraulics of Industry, 8th Ed.
Nicholas_A._Fraser@omb.eop.gov, or by Oil-well Drilling Fluids, 6th Ed. FOR FURTHER INFORMATION CONTACT:
fax to 202–395–5167, marked to the RP 17A–A, Addendum to Design and Roland Goodman, Standards
attention of Nicholas A. Fraser. Operation of Subsea Production Department, e-mail:
Systems—Petroleum and natural gas (goodmanr@api.org).
Dated: February 16, 2010.
industries-Design and operation of Meetings/Conferences: The
Susan K. Fawcett,
subsea production systems-Part 1: Exploration & Production Standards
Records Officer, USPTO, Office of the Chief General requirements and
Information Officer. Conference will be held in Washington,
recommendations, 4th Ed. DC, June 28–July 2, 2010. Interested
[FR Doc. 2010–3481 Filed 2–22–10; 8:45 am] RP 17Q, Recommended Practice for parties may visit the API Web site at
BILLING CODE 3510–16–P Subsea Qualification, 1st Ed. http://www.api.org/meetings/ for more
RP 19G4, Practices for Side-pocket information regarding participation in
Mandrels and Related Equipment, 1st these meetings.
DEPARTMENT OF COMMERCE Ed. Marketing:
RP 19G9, Design, Operation, and RP 1615, Installation of Underground
National Institute of Standards and
Troubleshooting of Dual Gas-lift Petroleum Storage Systems, 6th Ed.
Technology
Wells, 1st Ed. RP 1626, Storing and Handling Ethanol
Announcement of the American RP 2EQ, Seismic Design Procedures and and Gasoline-Ethanol Blends at
Petroleum Institute’s Standards Criteria for Offshore Structures, 1st Distribution Terminals and Service
Activities Ed. Stations, 2nd Ed.
RP 2MOP, Marine Operations, 1st Ed. RP 2611, Terminal Piping Inspection,
AGENCY: National Institute of Standards RP 2T, Planning, Designing and
1st Ed.
and Technology, Commerce. Constructing Tension Leg Platforms,
3rd Ed. FOR FURTHER INFORMATION CONTACT:
ACTION: Notice of intent to develop or
RP 5LT, Recommended Practice for Steve Crimaudo, Standards Department,
revise standards and request for public e-mail: (crimaudos@api.org).
comment and participation in standards Truck Transportation of Line Pipe, 1st
Ed. Petroleum Measurement:
development. MPMS Ch. 12.1.1, Calculation of Static
Spec 10A, Specification for Cements
SUMMARY: The American Petroleum and Materials for Well Cementing, Petroleum Quantities, Part 1—Upright
Institute (API), with the assistance of 24th Ed. Cylindrical Tanks and Marine
other interested parties, continues to Spec 11B, Specification for Sucker Vessels, 3rd Ed.
develop standards, both national and Rods, 27th. Ed. MPMS Ch. 12.1.2, Calculation of Static
international, in several areas. This Spec 13A, Specification for Drilling Petroleum Quantities, Part 2—
notice lists the standardization efforts Fluid Materials, 18th Ed. Calculation Procedures for Tank Cars,
currently being conducted by API Spec 17D, Subsea Wellhead and 2nd Ed.
committees. The publication of this Christmas Tree Equipment, 2nd Ed. MPMS Ch. 13.3, Measurement
notice by the National Institute of Spec 17E, Specification for Subsea Uncertainty, 1st Ed.
Standards and Technology (NIST) on Umbilicals, 4th Ed. MPMS Ch. 14.1, Collecting and
behalf of API is being undertaken as a Spec 19G1, Side-pocket Mandrels, 1st Handling of Natural Gas Samples for
public service. NIST does not Ed. Custody Transfer, 7th Ed.
necessarily endorse, approve, or Spec 19G2, Flow-control Devices for MPMS Ch. 19.1, Evaporative Loss From
recommend the standards referenced. Side-pocket Mandrels, 1st Ed. Fixed-roof Tanks (Previously
Spec 2SF, Manufacture of Structural Publication 2518), 4th Ed.
ADDRESSES: American Petroleum
Steel Forgings for Primary Offshore MPMS Ch. 19.2, Evaporative Loss From
Institute, 1220 L Street, NW., Floating-roof Tanks, 3rd Ed.
Applications, 1st Ed.
Washington, DC 20005; telephone (202) MPMS Ch. 19.3, Part H, Tank Seals and
Spec 5CRA, Specification for Corrosion
682–8000, http://www.api.org. Fittings Certification—
Resistant Alloy Seamless Tubes for
FOR FURTHER INFORMATION CONTACT: All Use as Casing, Tubing and Coupling Administration, 2nd Ed.
contact individuals listed in the Stock, 1st Ed. MPMS Ch. 19.4, Recommended Practice
supplementary information section of Spec 5CT, Specification for Casing and for Speciation of Evaporative Losses,
this notice may be reached at the Tubing—Petroleum and natural gas 3rd Ed.
American Petroleum Institute. industries—Steel pipes for use as MPMS Ch. 2.2D, Calibration of Upright
SUPPLEMENTARY INFORMATION: casing or tubing for wells, 9th Ed. Cylindrical Tanks Using the Internal
Spec 5ST, Specification for Coiled Electro-optical Distance Ranging
Background (EODR) Method (ANSI/API MPMS
Tubing, 1st Ed.
mstockstill on DSKH9S0YB1PROD with NOTICES
The American Petroleum Institute Spec 6A, Specification for Wellhead and 2.2D–2010), 2nd Ed.
develops and publishes voluntary Christmas Tree Equipment, 20th Ed. MPMS Ch. 21.1, Electronic Gas
standards for equipment, materials, Spec 7K, Drilling and Well Servicing Measurement, 2nd Ed.
operations, and processes for the Equipment, 5th Ed. MPMS Ch. 22.2, Testing Protocols—
petroleum and natural gas industry. Spec 8C–A3, Addendum 3 to Differential Pressure Flow
These standards are used by both Specification for Drilling and Measurement Devices, 2nd Ed.
private industry and by governmental Production Hoisting Equipment (PSL MPMS Ch. 22.4, Testing Protocols—
agencies. All interested persons should 1 and PSL 2)—(Modified), Petroleum Pressure, Differential Pressure, and
VerDate Nov<24>2008 16:25 Feb 22, 2010 Jkt 220001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\23FEN1.SGM 23FEN1
8040 Federal Register / Vol. 75, No. 35 / Tuesday, February 23, 2010 / Notices
RP 2200, Repairing Crude Oil, Liquefied Heavy Wall Pressure Vessels, 1st Ed.
Petroleum Gas and Product Pipelines, TR 934–D, Technical Report on the telephone at (202) 482–5131 (this is not
4th Ed. Materials and Fabrication Issues of a toll free number) or E-mail at
Std 1160, Managing System Integrity for 11⁄4Cr-1⁄2Mo and 1Cr-1⁄2Mo Steel oetca@ita.doc.gov.
Hazardous Liquid Pipelines, 2nd Ed. Pressure Vessels, 1st Ed. SUPPLEMENTARY INFORMATION: Title III of
FOR FURTHER INFORMATION CONTACT: TR 938–C, Use of Duplex Stainless the Export Trading Company Act of
Ed Baniak, Standards Department, e- Steels in the Oil Refining Industry, 1982 (15 U.S.C. 4001–21) authorizes the
mail: (baniake@api.org). 2nd Ed. Secretary of Commerce to issue Export
VerDate Nov<24>2008 16:25 Feb 22, 2010 Jkt 220001 PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 E:\FR\FM\23FEN1.SGM 23FEN1