Professional Documents
Culture Documents
Ondina 22
Ondina 22
Shell Ondina® Oil 22 is a water-white oil blended from highly refined mineral oil. It is intended for use as a
lubricant in the textile industry, as a slitter oil in the paper industry, or any other industry where oil may
accidentally spill on fabric or paper and must not cause a stain.
· Natural cleaning ability due to naphthenic base · Slitter applications in the paper industry
· Light viscosity
Specifications, Approvals & Recommendations
Main Applications For a full listing of equipment approvals and
· Textile industry where machine oil staining is an issue recommendations, please consult your local Shell Technical
Flash Point F 0 0
F ASTM D92 335
Pour Point, F 0 0
F ASTM D97 -25
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Shell Ondina Oil 22 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Advice
Advice on applications not covered here may be obtained from your Shell representative.