Professional Documents
Culture Documents
Trelawney Modern Design Beam Calculation
Trelawney Modern Design Beam Calculation
Determin Required As
R ≥ Mu ÷ Øbd2 0.3928628757 ksi
ρ from table 0.0033
As ≥ ρdb 0.2277 in.2
Checks
As,min = 200bd ÷ fy 0.23 in.2
a = Asfy ÷ 0.85f'cb, at exterior end 2.3529411765 in.
a = Asfy ÷ 0.85f'cb, at midspan 1.568627451 in.
a = Asfy ÷ 0.85f'cb, at interior end 2.3529411765 in.
c = a÷β1, exterior support 2.76816609 in.
c = a÷β1, midspan 1.84544406 in.
c = a÷β1, interior support 2.76816609 in.
es = et = ((d - c) ÷ c)ecu, at exerior end 0.009463125 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at midspan 0.0156946875 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at interior end 0.009463125 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2), at exterior end 334.48235294 k-in.
ØMn = ØAsfy(d - a/2), at midspan 231.45882353 k-in.
ØMn = ØAsfy(d - a/2), at interior end 334.48235294 k-in.
SHEAR DESIGN
wul/2 9.5646485 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 9.5646485 1.1955810625
Vu/Ø 12.752864667 1.59410808333333
Vc = 2λ√f'cbd 7558.5712936 lbs
Vc/2 3.7792856468 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 5.1942933731 -5.96446321023796
use 6 in.
1.26 k/ft
23.3802518888889 k-ft
15.0301619285714 k-ft
23.3802518888889 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
4 0.5 0.2 3 0.6
4 0.5 0.2 2 0.4
4 0.5 0.2 3 0.6
b used OK
d used OK
h used OK
392.862875679712 psi
OK
OK
OK
27.8735294117647 k-ft > Mu OK
19.2882352941176 k-ft > Mu OK
27.8735294117647 k-ft > Mu OK
At interior support
1.15
10.999345775
14.6657943666667
7.55857129357129 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
7.10722307309537 kips
18.4034779321736 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
Both end continous
fc (ksi) 3
fy (ksi) 60
Span (L), ft 6
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Determin Required As
R ≥ Mu ÷ Øbd2 0.1698025977 ksi
ρ from table 0.0033
As ≥ ρdb 0.1881 in.2
Checks
As,min = 200bd ÷ fy 0.19 in.2
a = Asfy ÷ 0.85f'cb, at exterior end 0.7843137255 in.
a = Asfy ÷ 0.85f'cb, at midspan 0.7843137255 in.
a = Asfy ÷ 0.85f'cb, at interior end 0.7843137255 in.
c = a÷β1, exterior support 0.92272203 in.
c = a÷β1, midspan 0.92272203 in.
c = a÷β1, interior support 0.92272203 in.
es = et = ((d - c) ÷ c)ecu, at exerior end 0.027886875 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at midspan 0.027886875 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at interior end 0.027886875 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2), at exterior end 98.364705882 k-in.
ØMn = ØAsfy(d - a/2), at midspan 98.364705882 k-in.
ØMn = ØAsfy(d - a/2), at interior end 98.364705882 k-in.
SHEAR DESIGN
wul/2 5.172081 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 5.172081 0.646510125
Vu/Ø 6.896108 0.8620135
Vc = 2λ√f'cbd 6244.0371556 lbs
Vc/2 3.1220185778 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 0.6520708444 -5.38202365555889
use 6 in.
1.26 k/ft
6.896108 k-ft
4.43321228571429 k-ft
6.896108 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
4 0.5 0.2 1 0.2
4 0.5 0.2 1 0.2
4 0.5 0.2 1 0.2
b used OK
d used Change d
h used Change h
169.802597722376 psi
OK
OK
OK
8.19705882352941 k-ft > Mu OK
8.19705882352941 k-ft > Mu OK
8.19705882352941 k-ft > Mu OK
At interior support
1.15
5.94789315
7.9305242
6.24403715555889 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
1.68648704444111 kips
15.7744096561488 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
One end continous
fc (ksi) 3
fy (ksi) 60
Span (L), ft 20.5
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Determin Required As
R ≥ Mu ÷ Øbd2 0.5454399241 ksi
ρ from table 0.0033
As ≥ ρdb 0.3663 in.2
Checks
As,min = 200bd ÷ fy 0.37 in.2
a = Asfy ÷ 0.85f'cb, at exterior end 4.862745098 in.
a = Asfy ÷ 0.85f'cb, at midspan 3.137254902 in.
a = Asfy ÷ 0.85f'cb, at interior end 4.862745098 in.
c = a÷β1, exterior support 5.7208765859 in.
c = a÷β1, midspan 3.69088812 in.
c = a÷β1, interior support 5.7208765859 in.
es = et = ((d - c) ÷ c)ecu, at exerior end 0.0067013105 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at midspan 0.0120370313 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at interior end 0.0067013105 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2), at exterior end 1075.9552941 k-in.
ØMn = ØAsfy(d - a/2), at midspan 731.43529412 k-in.
ØMn = ØAsfy(d - a/2), at interior end 1075.9552941 k-in.
SHEAR DESIGN
wul/2 18.44002675 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 18.44002675 2.30500334375
Vu/Ø 24.586702333 3.07333779166667
Vc = 2λ√f'cbd 12159.440777 lbs
Vc/2 6.0797203883 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 12.427261557 -9.08610298494802
use 6 in.
1.26 k/ft
84.0045663055556 k-ft
54.0029354821429 k-ft
84.0045663055556 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
5 0.625 0.31 4 1.24
4 0.5 0.2 4 0.8
5 0.625 0.31 4 1.24
b used OK
d used OK
h used OK
545.439924068212 psi
OK
OK
OK
89.6629411764706 k-ft > Mu OK
60.9529411764706 k-ft > Mu OK
89.6629411764706 k-ft > Mu OK
At interior support
1.15
21.2060307625
28.2747076833333
12.1594407766147 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
16.1152669067186 kips
28.9197510362728 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
One end continous
fc (ksi) 3
fy (ksi) 60
Span (L), ft 16.67
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Determin Required As
R ≥ Mu ÷ Øbd2 0.4711937379 ksi
ρ from table 0.0033
As ≥ ρdb 0.3267 in.2
Checks
As,min = 200bd ÷ fy 0.33 in.2
a = Asfy ÷ 0.85f'cb, at exterior end 3.6470588235 in.
a = Asfy ÷ 0.85f'cb, at midspan 2.3529411765 in.
a = Asfy ÷ 0.85f'cb, at interior end 3.6470588235 in.
c = a÷β1, exterior support 4.2906574394 in.
c = a÷β1, midspan 2.76816609 in.
c = a÷β1, interior support 4.2906574394 in.
es = et = ((d - c) ÷ c)ecu, at exerior end 0.0085366935 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at midspan 0.014881875 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at interior end 0.0085366935 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2), at exterior end 737.05235294 k-in.
ØMn = ØAsfy(d - a/2), at midspan 496.48235294 k-in.
ØMn = ØAsfy(d - a/2), at interior end 737.05235294 k-in.
SHEAR DESIGN
wul/2 15.583206518 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 15.583206518 1.9479008147625
Vu/Ø 20.777608691 2.59720108635
Vc = 2λ√f'cbd 10844.906639 lbs
Vc/2 5.4224533193 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 9.9327020522 -8.24770555225229
use 6 in.
1.32825042 k/ft
57.727122812606 k-ft
37.1102932366753 k-ft
57.727122812606 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
5 0.625 0.31 3 0.93
4 0.5 0.2 3 0.6
5 0.625 0.31 3 0.93
b used OK
d used OK
h used OK
471.193737884755 psi
OK
OK
OK
61.4210294117647 k-ft > Mu OK
41.3735294117647 k-ft > Mu OK
61.4210294117647 k-ft > Mu OK
At interior support
1.15
17.920687495815
23.89424999442
10.8449066386023 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
13.0493433558177 kips
26.290682760248 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
One end continous
fc (ksi) 3
fy (ksi) 60
Span (L), ft 21.375
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Section Design
SHEAR DESIGN
wul/2 20.302091066 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 20.302091066 2.53776138328125
Vu/Ø 27.069454755 3.383681844375
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 13.59547984 -10.0902930702521
use 6 in.
1.32825042 k/ft
96.4349325646875 k-ft
61.9938852201562 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
5 0.625 0.31 4 1.24
b used OK
d used OK
h used OK
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
4 0.5 0.2 3 0.6
≤ fy
At interior support
1.15
23.3474047261875
31.12987296825
13.4739749146271 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
17.6558980536229 kips
31.5488193122976 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
One end continous
fc (ksi) 3
fy (ksi) 60
Span (L), ft 21.375
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Determin Required As
R ≥ Mu ÷ Øbd2 0.5099342062 ksi
ρ from table 0.0033
As ≥ ρdb 0.4059 in.2
Checks
As,min = 200bd ÷ fy 0.41 in.2
a = Asfy ÷ 0.85f'cb, at exterior end 4.862745098 in.
a = Asfy ÷ 0.85f'cb, at midspan 3.137254902 in.
a = Asfy ÷ 0.85f'cb, at interior end 4.862745098 in.
c = a÷β1, exterior support 5.7208765859 in.
c = a÷β1, midspan 3.69088812 in.
c = a÷β1, interior support 5.7208765859 in.
es = et = ((d - c) ÷ c)ecu, at exerior end 0.0077501008 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at midspan 0.0136626563 Should be ≥ 0.005
es = et = ((d - c) ÷ c)ecu, at interior end 0.0077501008 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2), at exterior end 1209.8752941 k-in.
ØMn = ØAsfy(d - a/2), at midspan 817.83529412 k-in.
ØMn = ØAsfy(d - a/2), at interior end 1209.8752941 k-in.
SHEAR DESIGN
wul/2 20.302091066 kips
At exterior
support At midspan
Shear coefficient 1 0.125
Vu (kips) 20.302091066 2.53776138328125
Vu/Ø 27.069454755 3.383681844375
Vc = 2λ√f'cbd 13473.974915 lbs
Vc/2 6.7369874573 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc 13.59547984 -10.0902930702521
use 6 in.
1.32825042 k/ft
96.4349325646875 k-ft
61.9938852201562 k-ft
96.4349325646875 k-ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
5 0.625 0.31 4 1.24
4 0.5 0.2 4 0.8
5 0.625 0.31 4 1.24
b used OK
d used OK
h used OK
509.934206171921 psi
OK
OK
OK
100.822941176471 k-ft > Mu OK
68.1529411764706 k-ft > Mu OK
100.822941176471 k-ft > Mu OK
At interior support
1.15
23.3474047261875
31.12987296825
13.4739749146271 kips
STIRRUPS
NEEDED Use no.3 bar
At interior support
17.6558980536229 kips
31.5488193122976 kips
, max stirrup spacing is smaller of d/2 or 24 in.
FLEXURE DESIGN
Simply supported
fc (ksi) 3
fy (ksi) 60
Span (L), ft 6
slab thickness, ft 0.5
Factored Live load from slab 32 psf
Factored Dead load from slab 126 psf
6'' parpet wall (SDL), k/ft 0.0450225
Determin Required As
R ≥ Mu ÷ Øbd2 0.0728561773 ksi
ρ from table 0.0033
As ≥ ρdb 0.1881 in.2
Checks
As,min = 200bd ÷ fy 0.19 in.2
a = Asfy ÷ 0.85f'cb 0.7843137255 in.
c = a÷β1 0.92272203 in.
es = et = ((d - c) ÷ c)ecu 0.027886875 Should be ≥ 0.005
ØMn = ØAsfy(d - a/2) 98.364705882 k-in.
SHEAR DESIGN
Vu = wul/2 (at supports) 1.972581 kips
Vu = wu,Ll/8 (at midspan) 0.078 kips
Vn = Vu/Ø (at supports) 2.630108 kips
Vn = Vu/Ø (at midspan) 0.104 kips
Vu/Ø at d from supports = Vu/Ø - d/0.5 × l × (Vu/Ø at supports -
Vu/Ø at midspan) 1.9634961667 kips
min. Vn 1.9634961667 kips
Vc = 2λ√f'cbd 6244.0371556 lbs
Vc/2 3.1220185778 kips
At exterior
support At midspan
Vs where Vs = Vu/Ø - Vc -3.613929156 -6.14003715555889
use 6 in.
0.4095 k/ft
As provided,
Bar no. Bar Ø Bar area minimum # of bars in2
4 0.5 0.2 1 0.2
b used OK
d used Change d
h used Change h
72.8561772853185 psi
OK
8.19705882352941 k-ft > Mu OK
6.24403715555889 kips
STIRRUPS NOT
NEEDED Use no.3 bar
kips
15.7744096561488 kips
, max stirrup spacing is smaller of d/2 or 24 in.