Alccobind (WP) is a two-component acrylic copolymer emulsion modified cementitious waterproofing coating system for concrete and masonry surfaces. It provides a flexible coating that can bridge minor cracks and is used in waterproofing systems as a sandwich coating. The document outlines the product features, advantages, surface preparation steps, mixing and application instructions, coverage rates, safety precautions and packaging/storage details for Alccobind (WP).
Alccobind (WP) is a two-component acrylic copolymer emulsion modified cementitious waterproofing coating system for concrete and masonry surfaces. It provides a flexible coating that can bridge minor cracks and is used in waterproofing systems as a sandwich coating. The document outlines the product features, advantages, surface preparation steps, mixing and application instructions, coverage rates, safety precautions and packaging/storage details for Alccobind (WP).
Alccobind (WP) is a two-component acrylic copolymer emulsion modified cementitious waterproofing coating system for concrete and masonry surfaces. It provides a flexible coating that can bridge minor cracks and is used in waterproofing systems as a sandwich coating. The document outlines the product features, advantages, surface preparation steps, mixing and application instructions, coverage rates, safety precautions and packaging/storage details for Alccobind (WP).
alccobind (WP) Remove all loose materials, dust, fungus, moss, oil and grease etc. Using alccobind (WP) is a two component acrylic mechanical means like wire brush, hard copolymer emulsion modified cementitious brooms, chisel or sand blasting. water proofing coating system suitable for concrete and masonry surfaces and supplied All undulations on the surfaces, large in ready to mix packing. cracks to be repaired by alccofix (DS) - repair mortar prior to application of Product Features and uses: alccobind (WP). Gives flexible coating. Moisten the surface with water 24 hours Can be used to bridges minor cracks. prior to application of alccobind (WP) Used in waterproofing system as sandwich coating. Mixing and Application Waterproofing coating for water tanks 1. Ratio of Acrylic polymer to powder and reservoirs. should be 1:1
2. The liquid component should be poured
Product Advantages from the plastic container into a metal Excellent barrier to carbon dioxide, drum. chloride ions and water. Allows water vapor to escape from the 3. The powder component should be added structure. gradually to the liquid while mixing with a slow speed drill (500 r.p.m) fitted with a Surface Preparations mixing paddle to form a brush able slurry The surface preparation is the most essential 4. Alccobind (WP) should be immediately part of waterproofing treatment, following applied with a brush/ roller in 2 coats, steps are recommended: the interval between coats to be minimum 2 hours. Alccotech Building Materials Pvt Ltd Page 1 of 2 710 B Wing Loadha Supremus II Road # 22 Wagle Industrial Estate Thane W – 400604 www.alccotech.com TECHNICAL DATA SHEET ALCCOTECH BUILDING MATERIALS PVT LTD 5. Ensure that the 2nd coat application is DISCLAIMER: The use of this product is beyond the done in the perpendicular direction of manufacturer's control and liability is restricted to the replacement of material proven faulty" The the application of the 1st coat manufacturer is not responsible for any loss or damage arising from incorrect usage" Specifications are 6. Allow to set for 48 hours subjected to change without notice 7. Alccobind (WP) should be cured at every interval of 6 hours by sprinkling of water for 48 hours prior to application of protective screed.
8. Alccobind(WP) should be protected by
the application protective plaster/ screed
Precautions
1. Add powder to water/liquid and not water/
liquid to Powder 2. Do not mix excessively , use material immediately after mixing
Packaging & Storage Life
Alccobind (WP) is available in powder
component of 20 kg bag and liquid component of 20 kg and has a shelf life of 6 months from the date of manufacturing if stored in unopened original packing, under shade in dry and moisture free conditions
Coverage
1.2 – 1.8 kg/m2 in 2 coats, coverage figures
can vary due to several factors such as wastage, surface undulations, cracks etc.
Safety
The use of dust masks, safety goggles, and
gloves is recommended
Alccotech Building Materials Pvt Ltd Page 2 of 2
710 B Wing Loadha Supremus II Road # 22 Wagle Industrial Estate Thane W – 400604 www.alccotech.com