Professional Documents
Culture Documents
Temperature&Thermal Expansion
Temperature&Thermal Expansion
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th 15th 16th 17th 18th
Course Orientation & Temperature & Thermal Expansion of Solids & Liquids Heat & Internal Energy, Specific Heat & Calorimetry , Latent Heat 1st Law of Thermodynamics, & Energy Transfer Mechanisms (Long Test 1) Static Electricity (Coulombs law) Electric Fields, Gausss Law & Electric Potential Capacitance, Current & Resistance Ohms Law & Simple DC Circuits (Long Test 2) DC Circuits Analysis by Kirchhoffs Law MIDTERM EXAMINATION WEEK Magnetic Forces Sources of Magnetic Fields Motional Emf, Electromagnetic Induction , Motors & Generators (Long Test 3) Inductance & Transformers Alternating Current Circuits Fundamentals of Light, Reflection & Refraction, Dispersion (Long Test 4) Mirrors & Lenses, Interference of light wave Diffraction Patterns & Polarization of Light Waves FINAL EXAMINATION WEEK
Course Outline
TOPIC
HOUR 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Course Orientation
What is temperature? Zeroth Law of Thermodynamics Scales of Measuring Temperature Concept Map of Thermal Expansion Linear, Area and Volume Expansion Unusual Behavior of Water Assessment
We often associate the concept of temperature with how hot or cold an object feels when we touch it.
However, our senses are unreliable and often mislead us. For example, if we remove a metal ice tray and a cardboard box of vegetable from a freezer. Which object feels colder to the touch?
Two objects at different initial temperatures eventually reach some intermediate temperature when placed in contact with each other. Mixing hot and cold water in a bathtub Dropping an ice cube into a cup of hot coffee. Definition: 1.Thermal contact when two objects at different temperatures exchanged energy between them due to a temperature difference, even if they are not in physical contact with each other. 2.Thermal Equilibrium when two objects would not exchange energy by heat or electromagnetic radiation if they were placed in thermal contact.
This file is for exclusive use in my class Phy
On a day when the temperature reaches 50 F, what is the temperature in degrees Celsius and in Kelvins? A pan of water is heated from 25C to 80C. What is the change in its temperature on the Kelvin scale and on the
This file is for exclusive use in my class Phy
Change in Temperature
The change between two temperatures is specified in Celsius Degrees (C)
TK = TC = 5/9 TF
object can also be used to indicate temperature. For low to moderate temperatures, the radiation emitted is infrared. Infrared camera registers the intensity of infrared radiation. It is then connected to a color monitor that displays the different infrared intensities at different colors. This thermal painting is called thermograph or thermogram. Thermography finds application in medicine, oceanography and meteorology
Thermometric Properties
1. 2. 3. 4. 5.
Dimensions for solid materials Pressure at constant volume for gas Volume at constant pressure for liquids Color Resistance for conductors
Thermal Expansion
A phenomenon describing the changes in the dimension of a substance when temperature increases.
Linear Expansion
This file is for exclusive use in my class Phy 271-NEU by Luzale Dioso-Henson
Materials
Aluminum 24.0x10-6 Brass/Bronze 18.8x10-6 Copper 16.8x10-6 Glass (ordinary) 9.0x10-6 Glass (pyrex) 3.2x10-6 Iron 11.4x10-6 Lead 29.4x10-6 Invar (ni fe) Alloy 0.9x10This file is for exclusive use in my class Phy
The constant characterizes the volume expansion properties of a particular material (usually a fluid); it is coefficient of volume expansion
where =3 in solids, hence A=2Aoexclusive use in my class Phy This file is for T
Table of average expansion coefficients for some liquid materials /(c) MATERIALS
Alcohol, Ethyl 1.12x10-4 Benzene 1.24x10-4 Acetone 1.50x10-4 Glycerin 4.85x10-4 Mercury 1.82x10-4 Turpentine 9.00x10-4 Gasoline 9.60x10-4 Air2 at 0c 3.67x10-3
This file is for exclusive use in my class Phy
Applications
linear expansion has to be considered to minimize sagging of wires in between post. in the concreting of highways, construction of bridges and buildings, thermal expansion joints must compensate for dimensional changes that occur as temperature changes to avoid buckle-up when electronic devices are in operation, temperature increases and this must be considered in the design in the fabrication of materials for use in machine accesories such as diameter of rods and rings
This file is for exclusive use in my class Phy
1.
a. mental contact c. thermal contact b. mixture contact d. energy contact 2. Two objects in thermal equilibrium with each other are a. in physical contact c. at the same temperature b. in thermal contact d. at different temperature 3. The Celsius equivalent of 200K is a. -73 C c. 73 C b. 232 C d. 473 C 4. Lead melts at 626 F. The Celsius equivalent of this temperature is a. 316 C c. 330C b. 366 C d. 1069 increases by 50C . The 5. The temperature of an objectC increase in its absolute temperature is a. 28 K This file is c. 50 K for exclusive use in my class Phy
Assessment : When energy is exchangeditbetween 2 objects even if they are not in physical contact, is called
Assessment:
6. Fill the blank space with the given options. A material with a negative coefficient of linear expansion ______________ when temperature is increased. 7. For a solid, when its temperature is increased, the a. increases linearly c. decreases linearly expansion include its b. is unaffected d. vanishes a. length and width c. height and width 8. b. length and heightlinear expansion of aluminum is 24 x10-6 Ave. coefficient of d. 3 dimensions /C, copper has 19x10-6/C, and steel has 11 x10-6 /C. These indicates that for same changes in temperature and same initial length, the increase in 9. length purchased a 15.0 gal of gasoline when temperature is If you for 10 C, how less than that of copper c. copper is less than a. steel is much that steelgasoline will you have when temperature becomes 65 C? aluminum is less than that of copper d. aluminum is less b.
This file is for exclusive use in my class Phy
Assessment:
10. A metal pot whose volume is 1000 cm3 at 20C has a volume of 1006 cm3 at 100 C. Calculate the coefficient of linear expansion of the metal pot. a. 2.5 x 10 -5 / C c. 7.5 x 10 -5 / C b. 4.2 x 10 -5 / C d. 0.0126 / C These questions are of low and medium level of cognitive complexity to measure the learning of the students after the discussion. When you score below 9 points, you should review this topic and understand the concept and the use of temperature conversion and thermal expansion formulas before proceeding to solve questions/exercises of higher level of cognitive complexity.
This file is for exclusive use in my class Phy
Sample Problems: (This problems belong to high cognitive complexity level) #1. A brass ring of diameter 10.00 cm at 20C is heated and slipped over an aluminum rod of diameter 10.01 cm at 20C. Assuming the average of coefficients of linear expansion are constant, to what temperature must this combination be cooled to separate them? Is this attainable? ( al = 24 x 10-6 , brass = 19 x 10 -6 ) To conceptualize this problem, note that when the these two metals are cooled, both the diameter of the brass ring and the diameter of the aluminum rod will decrease. Since the coefficient of linear expansion of the aluminum is greater than that of the brass, its change in diameter will be greater than that of the brass given the same change in temperature. Note also that in order to separate these two metals, the change in diameter of the aluminum rod minus the change in diameter of the brass ring, Dal - Dbrass = 0.01 cm. Hence we can write,
This file is for exclusive use in my class Phy
(DoT) al - (DoT) brass = 0.01 cm. T [(Do) al - (Do) brass ] = 0.01 cm. T [(24x10-6/C)(10.01cm)-(19 x10-6)(10.00 cm)]=0.01cm
0.01 cm T = ------------------------------------------------[(24 x 10-6 /C)(10.01 cm) - ( 19 x 10 -6 /C)(10.00 cm)] T = 199C , (note that Tf<TI , since temperature was decreased and T must be a negative number or we can also write T = Ti Tf)
T Tf Tf Tf
Recall that compressional stress = F/A and the magnitude of the compressional force that the concrete supports exert on each end of the steel beam is given by:
F = YA ( L/Lo)
where Y is Youngs Modulus YA ( L/Lo) Compressional stress = A = Y ( L/Lo) Substituting Lo from the Lo in L = Lo ( T To) (Y L) Compressional stress = [ L/(T - To)] = Y (T-To) =(2.0x1011N/m2)[12x10-6(C] -1(42C - 23C) = 4.6 x107N/m2 (Answer)
This file is for exclusive use in my class Phy
For 1st assignment, please refer to topic outline of Linear expansion uploaded in the yahoogroup Phy271-neu@yahoogroups.com
References:
ysics, By Cutnell J., 7th ed, 2007, pp 360- 370 ysics for Scientist and Engrs. By Serway & Jewett, 7th ed. 2008 pp. 5 ysics for Scientist & Engrs. By Paul Tipler. 4th ed., 1990 pp. 541-549, haums Outlines Applied Physics By Arthur Beiser 4th ed., 2004, pp. u tube: Lec 32 8.01 Physics I: Classical Mechanics, MIT, Fall 1999