Professional Documents
Culture Documents
FMU Filter Indicators FDHB500UKv2.0 1306
FMU Filter Indicators FDHB500UKv2.0 1306
Measuring critical
system parameters
is essential
Reliable and continuous
control of the filter in all
applications
www.parker.com/hfde
Parker Hannifin
Hydraulic Filter Division Europe
196 FDHB500UK/FMU
Indicators Series
FMU Dp-Indicators and Pressure Indicators
Typical Applications
Industrial equipment
Mobile equipment
Marine/offshore applications
Parker Hannifin
Hydraulic Filter Division Europe
197 FDHB500UK/FMU
Specification
Parker Hannifin
Hydraulic Filter Division Europe
198 FDHB500UK/FMU
Indicators Series
FMU Dp-Indicators and Pressure Indicators
Contact configuration
P1-P2
rt
pa
No
75
ed
connect
Fix
Normally closed (N.C)
P2 low pressure
¾-16 UNF-2A
available.
High pressure
/ - 14UNF - 2A
7 8 / - 14UNF - 2A
7 8
Low pressure
/ -16 UNF-2A
3 4
ø19.78 +
- 0.06
ø18.83 +-0.06
Parker Hannifin
Hydraulic Filter Division Europe
199 FDHB500UK/FMU
FMUF Electronic
NPN
3 +V
FMU F
NPN +10...36 Vdc Rotating part 360° U12H U14M U14H
1 Load
A 98 105 105
2 Load B 27.5 32 32
0V
C Ø16.2 Ø19.78 Ø18.83
4
max 300 mA Green LED ±0.05 ± 0.06 ± 0.06
rt
pa
Yellow LED’s D 3/4-16 7/8-14 7/8-14
A
ed
U
NF-2A UNF-2A UNF-2A
Fix
PNP Red LED
3 +V
FMU F
PNP +10...36 Vdc High pressure
1 Load
B
2 Load
4 0V Low pressure C
max 300 mA D U14M model U14H model
B
< 50 % - Low pressure
50 % -
75 % 2 active
C High pressure C
100 % 1 active
D D
Enclosure class IP65
Electrical connector DIN 43650, cable connection PG9 or optinally M12 4-pin
Input supply voltage +10 to 36 Vdc
Safety feature: The 250 bar U14M indicator does not fit into the U14H cavity,
*Indication output max. 300 mA/36 Vdc
which is used in 420 bar filters
Output type: N.O. or N.C./NPN or PNP
Parker Hannifin
Hydraulic Filter Division Europe
200 FDHB500UK/FMU
Indicators Series
FMU Dp-Indicators and Pressure Indicators
Ordering Information
Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
FMU M3 K V M U14 H
• Ikmax: 1A Connection cable for PC serial connection and software for indicator
• Halogenfree cable settings and utilising memory logs.
Ordering Code: 905075030
General Information
Seal kits (fluoroelastomer) Ordering code
Indicators with thread connection U12H (former -F6) + S08 911045078
Available for all Indicators with thread connection U14M (former -W3) 911045086
thread connections
HEX 24 (Ø 26.5 mm) Indicators with thread connection U14H (former -W6) 911045087
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Parker Hannifin
Hydraulic Filter Division Europe
201 FDHB500UK/FMU
Pressure Indicators for Low Pressure Filters
ETF Filter
Visual pressure indicator 48 Vdc electrical indicator 1.0 bar 250 VAC electrical indicator 1.0 bar
Code G2 Code S2/S3 Code S4
mm (inches) mm (inches) mm (inches)
38
31 Rotating
part 360° (1.49)
(1.22)
G1/8
67
(2.64) 74
(1.57)
40
2 NO
44 (1.73)
C3 (2.91)
HEX 24 56 1 NC
(0.94) (2.20)
32 10 (0.39)
(1.26) 10
(0.39) G1/8K
HEX 27
(1.06) Fixed part
G1/8K
55
24 A/F
9
G1/8 (BSP)
Ø28
Specifications
Elec.rating 42V / 2A Visual indicator 1.2 bar
Thread connection G1/8 G1/8: code FMUG2EBPG02L
Elec.connection AMP terminal 6.3x0.8
Protection IP65 (terminal IP00)
Switch type NO or NC
Code FMUS2EBMG02L (NO switch)
FMUS3EBMG02L (NC switch)
Parker Hannifin
Hydraulic Filter Division Europe
202 FDHB500UK/FMU