This document is an electric watthour meter test report from the Republic of the Philippines Energy Regulatory Commission. It provides test results for a meter's serial number and company number, including the ideal and actual test ratios, accuracy percentages, and findings. The findings section lists 38 potential issues checked for such as accuracy, damaged parts, tampering, and cover seal issues. The report is signed by the witness and tester, and an ERC representative.
This document is an electric watthour meter test report from the Republic of the Philippines Energy Regulatory Commission. It provides test results for a meter's serial number and company number, including the ideal and actual test ratios, accuracy percentages, and findings. The findings section lists 38 potential issues checked for such as accuracy, damaged parts, tampering, and cover seal issues. The report is signed by the witness and tester, and an ERC representative.
This document is an electric watthour meter test report from the Republic of the Philippines Energy Regulatory Commission. It provides test results for a meter's serial number and company number, including the ideal and actual test ratios, accuracy percentages, and findings. The findings section lists 38 potential issues checked for such as accuracy, damaged parts, tampering, and cover seal issues. The report is signed by the witness and tester, and an ERC representative.
IDEAL TEST RATIO ACTUAL RATIO AVERAGE % AMPERE LOAD PERCENT ACCURACY METER STANDARD METER STANDARD ACCURACY
SP/SPMD/SPED/2S/2SMD/2SED/3S/3SMD/3SED/EPP/OTHERS As found reading Demand:
Energy: Reference Standard Make / Serial No. As left reading Demand: Energy: FINDINGS: Cover Seal No.: ERC DU ERC STICKER NO. 1. Accuracy and dial test okay 10. Cover rim clip/s were pried open 26. Missing meter cover 2. Altered meshing adjustment 11. Damaged register assembly 27. No Display 3. Altered suspension supports 12. Defective electronic module 28. No pulse output a. Upper b. Lower c. Both 14. Defective ratchet mechanism 29. Open potential coil 4. Bent register 15. Digital and analog readings do not match 30. Reset kWh registration 5. Broken meter cover 13. Erratic pulse output 31. Resistor was found connected to: 6. Broken guide pin 16. Error on display a. current sensor lead wire 7. Burned meter 17. Failed to register b. potential lead wire 8. Corroded meter parts 18. Filed gear 32. Regressed kWh registration 9. Cover Seal Condition: 19. Foreign particles inside meter 33. Run-away registration a. intact 20. Foreign particles bet. magnets 34. Shunted current coils b. deformed 21. Frozen display 35. Stopped meter c. w/ cut sealing wire 22. Incomplete LCD segment 36. Totally damaged meter d. pulled-out 23. Interlocked gears 37. W/ scratches on the face of the register e. missing 24. Misaligned dial pointers 38. Others: see remarks f. fake 25. Missing cover rim clip/s