Professional Documents
Culture Documents
Liquid Application Data Sheet
Liquid Application Data Sheet
LIQUID MEASUREMENTS
CUSTOMER
Company/Plant location: Date:
Phone/e-mail: Name/Title:
MEASUREMENT FUNCTION
1. Type: pH Cond ORP Dissolved Oxygen 3. Measurement Range
Ozone Other 4. Desired Accuracy
2. Nature of Measurement: Monitor only 5. Purpose of Measurement
On-off control using alarms Control using current output 6. Have tried on-line measurements before?
PROCESS CONDITIONS
1. Type of Process: 9. Substances present that might Coat or Abrade
electrodes?
2. Typical stream components: Describe
Component Normal, High Low
% 10. Maintenance Interval: Daily Weekly Monthly
% 11. Autoretraction? No Yes
% 12. Calibration Required? No Yes
% Describe how often
% 13. Diagnostics Desired? No Yes
3. pH Range 14 Which of the following materials will withstand
4. Temperature, °C/°F corrosion or chemical attack by the process stream?
5. Pressure, kPa/psig Check all that apply
6. Approx. Viscosity: Paste Syrup Water Sensor Body Material O-Ring Material
7. Sanitation: CIP SIP Autoclave No PVC Ryton EPDM Viton
8. Are Suspended Solids Present? No Yes % PEEK Teflon/Tefzel Teflon Kal-rez
Describe 316 SS Titanium Other
Process Conductivity Range :
ANALYZER CONDITIONS
1. Temperature at Analyzer: 4. Is Radiation Present? Yes No
High Low Describe
2. Hazardous Area Classification: General Purpose 5. Total Distance from Sensor
Class I Division I Group 6. Preamp Location:
(pH/ORP only) Sensor
Class I Division II Group Analyzer J-Box (Distance from sensor )
Other 7. Communication Signal: wireless
3. Power Supply mA FieldBus ProfiBus HART
rev3., 07.16.2008