Professional Documents
Culture Documents
H-E Parts Flyer Jaw Crusher
H-E Parts Flyer Jaw Crusher
NOT DUPLICATION.™
JAW OPTIONS
crusher is a high capacity, single toggle
jaw crusher designed and manufactured
by H-E Parts. It is suitable for use in both
mobile and fixed plant applications.
H-E PARTS HAS STANDARD
INNOVATIVE DESIGN JAW LINER PROFILE OPTIONS
The design incorporates a number of patent
TO SUIT MOST APPLICATIONS.
pending innovations, while retaining the
H - E PA R T S L I N E R
usual selling features such as spherical roller
bearings, heavy duty construction, rocking DEVELOPMENT PROGRAM
toggle assembly and reversible jaws. CAN BE UTILIZED TO PROVIDE
CUSTOMERS WITH SITE-
The result is an innovative crusher that
has been tested in the most extreme SPECIFIC PERFORMANCE
applications. The CME™ 1100HD has a AT THE LOWEST TOTAL
higher stroke than all commonly available OPERATING COST.
machines, ensuring that high tonnages
are possible even at small gap settings.
FEATURES
High inertia SG iron flywheels Common bearing assembly allows
for low spare parts inventory
Heavy duty chamber design & high stroke toggle
assembly for maximum tonnage and maximum life
Removable jaw toes fully protected Dry toggle assembly toggle plate end
by jawplates for maximum life and toggle seats, all induction hardened
Side access jaw bolt system Side-access jaw bolts remove access problems in front of the crusher and allows jaw changes to
be conducted quickly and easily.
The CME™ 1100HD has a positive locking jaw bolt arrangement that ensures the jaws are held in
Open pitman design The open pitman design allows for easy, on-site repair with commonly available welding consumables.
Common bearing All four bearings used in the CME™ 1100HD are identical, minimizing emergency stock inventories.
arrangement
Fully replaceable jaw All jaw supports are fully replaceable, minimizing lengthy rebuild requirements inherent in repairing
some machines.
Application-specific liner H-E Parts is often regarded as an industry leader in application-specific liner design, and can tailor
gap adjustment rapidly and without the need to crawl under the crusher to release or tension the pullback spring.
Optional fully automatic Any loss of tension in the pullback springs is automatically corrected, protecting the crusher against
spring tensioning damage due to toggle knock and minimising the need to regularly check spring tension.
CAPACITIES CSS
(MM)
TONNAGE RATE
(MTPH)
The capacity data is based on computer models 70 148-160
using rock with a bulk density of 1.6 t/cubic metre. 80 169-183
Actual throughput depends on a large number 90 191-206
of factors and will vary between feed materials. 100 212-229
Technical data and specificaitions are subject 125 265-286
to change without notice. 150 318-343
175 371-400
200 423-457
HEPI02AUG18 www.h-eparts.com