Professional Documents
Culture Documents
Sony KDL60W855B, KDL70W855B Chassis RB2G-HE
Sony KDL60W855B, KDL70W855B Chassis RB2G-HE
Sony KDL60W855B, KDL70W855B Chassis RB2G-HE
Supported model
REPAIR MANUAL
RB2G Chassis
Segment: HE
KDL-60W855B
9-883-570-01
TABLE OF CONTENTS
Cautions and Warnings....................................................................................ii Section 4 - Exploded View/Part Number Information..................................19
Section 1 - Specifications and Layouts..........................................................1 Table Top Stand............................................................................................19
Specifications.................................................................................................1 KDL-60W855B.............................................................................................20
Checking the Accessories......................................................................................1 KDL-70W855B.............................................................................................21
Board Layout..................................................................................................2 Smart Core Block.........................................................................................26
KDL-60W855B........................................................................................................2 Connectors...................................................................................................27
KDL-70W855B........................................................................................................2 KDL-60W855B......................................................................................................27
Smart Core Block...................................................................................................2 KDL-70W855B......................................................................................................27
Wire Dressing.................................................................................................3 Screws..........................................................................................................28
KDL-60W855B........................................................................................................3 Section 5 - Accessories/Part Number Information......................................29
KDL-70W855B........................................................................................................3 Accessories and Packaging.........................................................................29
Smart Core Block...................................................................................................3 Miscellaneous...............................................................................................29
Section 2 - Troubleshooting............................................................................4 Optional Accessories....................................................................................29
Diagnosing the Error......................................................................................4 Remote Commander....................................................................................29
Viewing the Self Check Diagnosis History..............................................................4
Appendix A: Encryption Key Components................................................ A-1
Triage Chart....................................................................................................5
Flowcharts and Diagrams...............................................................................6
Overall Block Diagram............................................................................................6
Power and Control Block Diagram.........................................................................7
No Power Flowchart...............................................................................................8
Standby LED Blinking Flowchart............................................................................9
Video Distortion Flowchart....................................................................................10
No 3D Viewing...................................................................................................... 11
Section 3 - Repair Information.......................................................................12
Repairing the TV...........................................................................................12
Removing the Rear Cover....................................................................................12
Replacing the Main Board / Tuner Board.....................................................13
Replacing the Power Supply Board..............................................................17
Removing the Smart Core Block..................................................................18
KDL-60W855B/70W855B i
CAUTIONS AND WARNINGS
KDL-60W855B/70W855B ii
CAUTIONS AND WARNINGS
3. Measuring the voltage drop across a resistor by means of a VOM AC Outlet Box
or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so
analog meters must have an accurate low voltage scale. Nearly all
battery-operated digital multimeters that have a 2 VAC range are
suitable. (see Figure A)
To Exposed Metal
Parts on Set Figure B. Checking for earth ground.
AC
0.15 µF Voltmeter
(0.75V)
Earth Ground
Figure A. Use an AC voltmeter to check AC leakage.
KDL-60W855B/70W855B iii
SECTION 1 - SPECIFICATIONS AND LAYOUTS
SPECIFICATIONS
Sistema
Nome do modelo KDL-70W855B KDL-60W855B
Sistema de televisão Analógico: NTSC/PAL-M/PAL-N
Digital: SBTVD
Alimentação e outros
Cobertura de canais VHF: 2-13 Requisitos de alimentação 110-220V CA, 60Hz
UHF: 14-69
CATV (analógico): 1-135 Consumo de em uso 208 W 190 W
energia
Sistema do painel Painel LCD (tela de cristal líquido), retroiluminação LED em standby Menos de 0,2 W com 127 V CA e menos de 0,3 W com 220 V CA
Potência de saída dos Tamanho da tela* 2 (cm) Aprox. 176,6
10 W + 10 W (7 ohms, 1kHz, 10% THD* 1,127 V) Aprox. 152,5
alto-falantes (RMS) (polegadas medidas 69,5 polegadas
60 polegadas
Tecnologia wireless Protocolo IEEE802.11a/b/g/n diagonalmente) (classe 70)
Resolução do monitor 1,920 pontos (horizontal) × 1,080 linhas (vertical)
Tomadas de entrada/saída
Dimensões* 2 com pedestal
CABLE/ANTENNA Terminal de antena externa de 75 ohms para entradas RF 1,586 x 970 x 370 1,371 x 841 x 323
(mm)
VIDEO IN 1 Entrada de vídeo / áudio (tomadas RCA) sem pedestal
(mm) 1,586 x 920 x 93 1,371 x 799 x 93
COMPONENT IN YP B P R (vídeo componente): 1080p (50, 60 Hz), 1080i (50, 60 Hz), 720p (50, 60 Hz), 576p, 576i, 480p, 480i
padrão de furo
Entrada de áudio (tomadas RCA)
para montagem 400 × 300 30 0 × 3 00
VIDEO IN 2 Entrada de vídeo (plugue RCA comum com entrada Y)
na parede (mm)
HDMI IN 1/2/3/4 Vídeo (2D): 1080p (30, 50, 60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, tamanho do
576p, 576i, 480p, 480i, Formatos PC parafuso para
Vídeo (3D): M6 (8-12 mm)
montagem na
Frame Packing: 1080p (30 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p parede (mm)
Lado a lado: 1080p (50, 60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (50, 60 Hz)
Sobreposto: 1080p (30, 50, 60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (50, 60 Hz) Peso* 2 com pedestal
(kg) 44, 6 34 , 7
Áudio: PCM linear de 5.1 canais: 32, 44,1 e 48 kHz, 16, 20 e 24 bits, Dolby Digital
ARC (Audio Return Channel, Canal de Retorno de Áudio) (somente HDMI IN 2) sem pedestal
(kg) 43, 5 33 , 7
MHL Vídeo (2D): 1080p (30 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p,
(Comum com HDMI IN 1) 576i, 480p, 480i Outros
Vídeo (3D):
Lado a lado: 1080/24p, 1080i (50, 60 Hz), 720p (50, 60 Hz) Acessórios opcionais Unidade de Câmera e Microfone: CMU-BR200/CMU-BR100
Sobreposto: 1080p (30 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (50, 60 Hz) Controle Remoto com Touchpad: RMF-YD003 (somente KDL-70W855B)
Áudio: PCM linear de 5.1 canais: 32, 44,1 e 48 kHz, 16, 20 e 24 bits, Dolby Digital Subwoofer sem fios: SWF-BR100
AUDIO OUT/ i Saída de áudio (minitomada estéreo) Cabo MHL: DLC-MB10/DLC-MB20/DLC-MC10/DLC-MC20/DLC-MC30
Tomada para fones de ouvido Óculos 3D Ativos: TDG-BT500A
(suporta saída de Subwoofer)
DIGITAL AUDIO OUT Tomada digital óptica
(OPTICAL) (PCM linear de dois canais, Dolby Digital)
USB/DLNA Consulte o i-Manual para obter informações sobre os formatos suportados Umidade de operação 10 % – 80 % RH (sem condensação)
*1 Distorção Harmônica Total. *2 Os valores de tamanhos de tela, dimensões e pesos são aproximados.
• A disponibilidade dos acessórios opcionais depende do país/região/modelo de TV/estoque.
• Projeto e especificações técnicas sujeitos a alterações sem aviso prévio.
• Este aparelho de TV incorpora MHL 2.
KDL-60W855B/70W855B 1
SECTION 1 - SPECIFICATIONS AND LAYOUTS
BOARD LAYOUT
LD BOARD WIRELESS
LAN CARD
TUNER BOARD MAIN BOARD
(TUS BOARD) (BAX BOARD)
BT MODULE
TCON
POWER BOARD
(G2B BOARD) HSC2 BOARD
SWITCH
UNIT
SMART CORE
KDL-70W855B
LD BOARD
TCON
POWER BOARD
(G2B BOARD)
SWITCH
UNIT
SMART CORE
KDL-60W855B/70W855B 2
SECTION 1 - SPECIFICATIONS AND LAYOUTS
WIRE DRESSING
KDL-70W855B
KDL-60W855B/70W855B 3
SECTION 2 - TROUBLESHOOTING Self Diagnosis
Supported model
*Format of Error History = YYMMDDhhmmss example 120123132522= Jan 23, 2012 13:25:22 (1:25:22PM)
NOTE: date and time must be set for this to work
KDL-60W855B/70W855B 4
SECTION 2 - TROUBLESHOOTING
TRIAGE CHART
Use this general Triage Chart to determine what may possibly be causing the error before going out to the customers location.
1. Confirm the symptom from the customer. Red Dot: (Primary) Most likely defective part.
2. Select that symptom from the chart. Blue Triangle: (Secondary) Possible defective part.
3. Bring the primary component listed for that symptom.
4. Follow the associated flowcharts in the Training Manual to isolate the board.
5. Chart Color Code.
MAIN BOARD ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
TUNER BOARD ▲ ▲ ▲ ▲
POWER SUPPLY ▲ ▲ ▲
H BOARD ▲
SPEAKERS ▲
WIFI
BT BOARD
LD BOARD ▲
LVDS FFC ▲ ▲ ▲ ▲
TCON ▲ ▲ ▲ ▲ ▲
LCD PANEL ▲ ▲
AUDIO/ BACK- SOFT- EMI-
Problem POWER LD TCON TEMP
TTER
POWER LIGHT WARE
KDL-60W855B/70W855B 5
SECTION 2 - TROUBLESHOOTING
MAIN BOARD
HDMI 1 / MHL
HDMI
HDMI 2 /ARC L
SWITCH
HDMI 3 EQ AUDIO
HDMI 4 AMP
A/V
R
DECODER
ETHERNET
VIDEO
USB PROCESS
OPTICAL
USB AUDIO OUT LCD PANEL
USB HUB
HEADPHONES
CAMERA USB OUT
HUB HFR
MIC
LVDS
TCON
TUNER BOARD
SMART CORE
IR RX
WIFI LED’s BT SWITCH
HIR UNIT
HSC2
POWER SUPPLY
AC IN
BOARD
G2B
KDL-60W855B/70W855B 6
SECTION 2 - TROUBLESHOOTING
POWER_ON 28 11 12 30 GND
AC_OFF_DET 27 12 11 29 GND
STBY3.3V 23 14 3 28 BL_ERR
REG12V 17 21 5 27 BL_ON
REG12V 16 20 10 25 GND
REG12V 15 19 9 24 GND
REG12V 14 18 8 23 GND
REG12V 13 17 7 22 GND
GND 12 30 17 21 +19.5V(12V)
GND 11 29 16 20 +19.5V(12V)
GND 10 25 15 19 +19.5V_SS(12V)
GND 9 24 14 18 +19.5V_HOLD(12V)
GND 8 23 13 17 REG+12V
GND 7 22 23 14 STBY+3.3V
27 12 AC_OFF_DET
BL ON 5 27 LD BOARD
BL_ERR 3 28 28 11 POWER_ON
NC 25 NC GND 9 15 9 15 GND
DC_DIMMER 1 NC NC 9 LD_STBY
NC 6 LD_PWR_4/SPI0_RDATA/BLU_TEMP
CN6601
VLED_VCC 1 14 1 14 VLED_VCC NC 1 LD_MODE_SW
VLED_VCC 2 13 2 13 VLED_VCC
VLED_VCC 3 12 3 12 VLED_VCC
BAX
VLED_VCC 4 11 4 11 VLED_VCC
VLED_GND 6 9 6 9 VLED_GND
VLED_GND 7 8 7 8 VLED_GND
VLED_GND 8 7 8 7 VLED_GND
VLED_GND 9 6 9 6 VLED_GND
SIGNAL_GND 10 5 10 5 VLED_GND
LD_ERR 11 4 11 4 LD_ERR
GL_CTRL 12 3 12 3 GL_CTRL
REG12V 14 1 14 1 SET_12V
NC 5 NC NC 10 NC
NC 13 NC NC 2 NC
CN2001
CN6101
LD
1 AC-N
AC_IN
2 AC-L
G2B
KDL-60W855B/70W855B 7
SECTION 2 - TROUBLESHOOTING
NO POWER FLOWCHART
No Power
No No
No
No
Power Supply
Main Board*
Board*
*For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page 19.
KDL-60W855B/70W855B 8
SECTION 2 - TROUBLESHOOTING
Protect
Shutdown.
Yes
Standby LED 10X
10X Placa
HEM3 Principal*
Board
H Board*
Blinking
No
Yes
2X Power Supply
Yes
Board* 10X
9X Placa
HEM3Principal*
Tuner Board
Board*
No
No
Yes
3X Main Board* Yes
10X
8X HEM3
See Board
Triage Chart
No
No
No No No After a while
4X 5X 6X 7X Check ventilation
*For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page 19.
KDL-60W855B/70W855B 9
SECTION 2 - TROUBLESHOOTING
Video Distortion
Lines
Is distortion Yes Improper or No
Vertical lines Yes move when Yes
across entire missing wide-mode Main Board*
or bars?
screen? colors? changed?
No Yes No No
TCON*
Main Board*
(LCD Panel)
Yes
Any horizontal LCD Panel*
lines?
No
No
Yes
More than 1 TCON*
vertical band? (LCD Panel)
*For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page 19.
KDL-60W855B/70W855B 10
SECTION 2 - TROUBLESHOOTING
NO 3D VIEWING
3D Not Working
Double images No
displayed on Main Board*
screen?
Yes
Yes No
Bluetooth
3D OK
Board*
*For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page 19.
KDL-60W855B/70W855B 11
SECTION 3 - REPAIR INFORMATION
REPAIRING THE TV
If the latest Software does not correct the issue, complete the following: 4. Locate and remove all screws from the Rear Cover.
1. Verify the television has the symptom the customer indicated.
2. Replace part causing the symptom.
3. Install the latest version of Software (Required for ALL repairs).
4. Perform the required service adjustments and checks.
5. Verify the repair resolved the issue.
2. Place TV face down on a soft and flat surface to remove all screws and 5. Grasp the Rear Cover as shown in the illustration to separate from panel.
detach the left and right Stand.
HOLD
KDL-60W855B/70W855B 12
SECTION 3 - REPAIR INFORMATION
b. Connect TV to AC power.
Bracket Rear
c. Wait at least 20 seconds.
Side
Bracket 8. When the DIGITAL Menu appears, press 2 until 002 MODEL
category displays.
Under Bracket
DIGITAL SERVICE
3. Locate and disconnect the connectors. Then remove all screws from 002 MODEL
the Tuner Board and Main Board and lift to detach. 000 BOARD CHECK
DIGITAL SERVICE
4. Install the new Main Board and/or Tuner Board and screws. 002 MODEL
5. Reconnect all connectors. 002 DEST SBTVD-T_BASE
KDL-60W855B/70W855B 13
SECTION 3 - REPAIR INFORMATION
10. Press 3 until the correct destination of the TV displays. 15. Locate the Serial Number for the TV on the side of the Rear Cover.
(Use the table below for reference).
MODEL NO
Model Name Destination Data Value
KDL-60W855B
KDL-60W855B BRAZIL SBTVD-T_BASE
SERIAL NO
KDL-70W855B BRAZIL SBTVD-T_BASE
2000001
11. Press MUTE then 0 to save the changes.
16. Press 1 until 004 SERIAL item displays.
DIGITAL SERVICE
002 MODEL
SBTVD-T_BASE DIGITAL SERVICE
002 DEST
002 MODEL
WRITE 004 SERIAL
*1 SerialNumber
13. Press 3 until the model displayed matches the model of the TV.
18. Press to display the Serial Number input screen.
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes. DIGITAL (MODEL) SERVICE
14. Press MUTE then 0 to save the changes. SerialNumberEdit
*1 SerialNumber
Please Input serial number
(0000000-99999999)
DIGITAL SERVICE _______
002 MODEL
CAUTION: The Serial Number can only be selected once. Be sure
003 MODELNAME KDL-60W855B
to verify the information is correct before saving the changes.
WRITE
KDL-60W855B/70W855B 14
SECTION 3 - REPAIR INFORMATION
19. Enter the Serial Number of the TV. 24. Cycle AC Power (Unplug and plug AC Cord from the outlet).
NOTE: If the incorrect Serial Number is entered, press RETURN 25. Access Service Mode, by pressing the following buttons within
to go back to the Serial Number input screen and re-enter 1 second of each other:
the correct number.
Info i+ Channel 5 Volume + POWER
20. Press to save the Serial Number.
26. When the DIGITAL Menu appears, press 2 until 002 MODEL
DIGITAL (MODEL) SERVICE category displays.
SerialNumberEdit
*1 SerialNumber
DIGITAL SERVICE
2000001 WRITE 002 MODEL
000 BOARD CHECK
21. Press 1 until 006 VAR_TYPE item displays.
DIGITAL SERVICE 27. Press 0 to select the 000 BOARD CHECK item.
002 MODEL
006 VAR_TYPE
DIGITAL (MODEL) SERVICE
Board Check
1. Replace MAIN BOARD (and TUNER BOARD)
22. Press 3 until STD option displays. 2. Replace TUNER BOARD only
DIGITAL SERVICE
002 MODEL
006 VAR_TYPE STD
DIGITAL SERVICE
002 MODEL
006 VAR_TYPE STD
WRITE
KDL-60W855B/70W855B 15
SECTION 3 - REPAIR INFORMATION
When replacing the Main Board and/or Tuner Board: When replacing the Tuner Board only:
28. Press 1 to verify the Main Board replacement results. 30. Press 2 to verify the Tuner Board replacement results.
NOTE: Either one of the following messages indicates
a correct process. DIGITAL (MODEL) SERVICE
Board Check
DIGITAL (MODEL) SERVICE OK
Board Check TUNER BOARD OPTION: STANDARD
OK
TUNER BOARD OPTION: STANDARD CAUTION: If the Tuner Board is a mismatch to the Main Board,
a “NG: DIFFERENT KIND OF TUNER BOARD HAS BEEN
CONNECTED” will display.
DIGITAL (MODEL) SERVICE
31. Press RETURN then MUTE and 0 to save the changes.
Board Check
OK
TUNER BOARD OPTION: PCA / HTL DIGITAL (MODEL) SERVICE
TUNER BOARD OPTION is changed correctly Board Check
1. Replace MAIN BOARD (and TUNER BOARD)
CAUTION: If the Main Board is a mismatch to the Tuner Board, 2. Replace TUNER BOARD only
a “NG: WRONG COMBINATION OF MAIN BOARD AND TUNER WRITE
BOARD” will display.
KDL-60W855B/70W855B 16
SECTION 3 - REPAIR INFORMATION
32. Clear the Self Check screen. REPLACING THE POWER SUPPLY BOARD
a. Press POWER to exit Service Mode. 1. Locate and remove the connectors from the Power Supply Board, then
remove all screws and lift as shown to detach.
b. Press the following buttons on the Remote Commander within
1 second of each other:
SELF CHECK
000 RESERVED --------------------- --------------------- --------------------- 00
2. Install the new Power Supply Board and screws.
000 RESERVED --------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00 3. Reconnect all connectors.
003 DC_ALERT --------------------- --------------------- --------------------- 00
003 AUD_PROT --------------------- --------------------- --------------------- 00 4. Update the Software.
003 HDMI_EQ --------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00 After ALL repairs UPDATE the SOFTWARE to the latest version.
004 VLED --------------------- --------------------- --------------------- 00
004 LD_ERR --------------------- --------------------- --------------------- 00
Instructions are included with the Software package on the Sony
005 HFR_ERR --------------------- --------------------- --------------------- 00 website.
005 TCON_ERR 120123132522 120123113645 --------------------- 02 Error Count
005 P_ID-ERR --------------------- --------------------- --------------------- 00 a. Insert the USB device with the latest Software into one of the TVs’
006 BACKLITE --------------------- --------------------- -------------------- 00 USB ports.
007 TEMP_ERR --------------------- --------------------- --------------------- 00
007 FAN_ERR --------------------- --------------------- --------------------- 00
010 EMITTER --------------------- --------------------- --------------------- 00 b. Connect TV to AC power.
101 VPC_WDT --------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00 c. Wait at least 20 seconds.
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT --------------------- --------------------- --------------------- 00
d. Press POWER on the remote to turn ON the TV.
00345 000333 06789
e. Wait until the Software update is completed.
c. To clear the error history and error count press 8 0 .
d. Press POWER to exit Self Check Mode.
33. Cycle AC Power (Unplug and plug AC Cord from the outlet).
KDL-60W855B/70W855B 17
SECTION 3 - REPAIR INFORMATION
6 4 3
5 2
1
HSC2 Board
3. Grasp Smart Core Block and carefully pull upwards, then disconnect
Harness to detach from Panel. 7. Release 4 hooks to remove the back cover from the front cover.
Locate and unclamp the side clips to detach the BT Module and
Wireless LAN Card.
Wireless
LAN Card
BT Module
4. Pull Bottom Cover on the direction shown to detach from Top Cover.
Top Cover
Bottom Cover
KDL-60W855B/70W855B 18
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
Components not identified by a part number or description The component parts of an assembly are indicated by the reference numbers in
TABLE TOP STAND are not stocked because they are seldom required for routine the far right column of the parts list and within the dotted lines of the diagram.
service.
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
mark are critical for safety. information. Specific instructions must be adhered to whenever these components are
Replace only with part number specified. repaired and/or replaced. (See Appendix A)
KDL-60W855B/70W855B 19
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
61
60
61 4-484-096-01 BRACKET, VESA (S)
62 A-1998-594-A BRACKET SP (RIGHT)
59
52
58
53
56
55
54
57
KDL-60W855B/70W855B 20
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
111
102
108
103
106
105
104
107
KDL-60W855B/70W855B 21
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
152
158 4-480-397-11 BRACKET, SIDE
159 1-798-510-21 SWITCH UNIT
161
155
160 4-480-122-01 HOLDER, SIDE SW
153
161 A-1998-591-A PANEL SIDE (LEFT)
154
REINSTALL THIS PART WHEN REPLACING THE LCD PANEL.
156
157
158
160
159
KDL-60W855B/70W855B 22
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
205
211 210 4-480-122-01 HOLDER, SIDE SW
203 211 A-1997-420-A PANEL SIDE (LEFT)
REINSTALL THIS PART WHEN REPLACING THE LCD PANEL.
204 206
207
208
209 210
KDL-60W855B/70W855B 23
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
253
251
254
252
254
KDL-60W855B/70W855B 24
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
306
306 NA LCD PANEL
FOR LCD PANEL AND TCON BOARD PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL.
301
304
302
304
KDL-60W855B/70W855B 25
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
353
355 352
356
357
KDL-60W855B/70W855B 26
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
KDL-60W855B KDL-70W855B
404
454
401
451
402
452
403
453
REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION
401 1-910-804-26 CONNECTOR ASSEMBLY 14P (G2B/LD) 451 1-910-804-30 CONNECTOR ASSEMBLY 14P (G2B/LD)
402 1-848-159-11 (LVDS) FLEXIBLE FLAT CABLE 51P (BAX/TCON) 452 1-848-160-11 (LVDS) FLEXIBLE FLAT CABLE 51P (BAX/TCON)
403 1-910-804-24 HARNESS ASSEMBLY (BAX/LD/G2B) 453 1-910-804-28 HARNESS ASSEMBLY (BAX/LD/G2B)
404 1-910-804-23 CONNECTOR ASSEMBLY 30P (BAX/SC/SU/SPKS) 454 1-910-804-27 CONNECTOR ASSEMBLY 30P (BAX/SC/SU/SPKS)
KDL-60W855B/70W855B 27
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and ! NOTE: The components identified by a red outline and a mark contain confidential
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 Rear Cover (9), Cover Under (1) Smart Core Block (2)
2-990-421-41 SCREW (+PSW) (M3X6) Main Board (6), Power Supply Board (5), Switch Unit Holder (1),
Panel Bracket L (4), Panel Bracket M (3), Rear Bracket (1)
4-256-393-01 SCREW, +PSW M3X6 W12 Tuner Board (4), Main Plate (5), AC Bracket (1), Rear Cover (16),
Speakers Bracket (8), Panel Sides (6)
2-580-600-01 SCREW, +PSW M4X8 Bracket Stand Out (4), Bracket Stand In (2)
4-159-298-01 SCREW, +PSW M4X10 Vesa Brackets (4), Stand Brackets (16), Rear Cover (2),
AC Cover (1)
KDL-60W855B/70W855B 28
SECTION 5 - ACCESSORIES/PART NUMBER INFORMATION
ACCESSORIES AND PACKAGING MISCELLANEOUS
PART NO. DESCRIPTION PART NO. DESCRIPTION
REMOTE COMMANDER
PART NO. DESCRIPTION
KDL-60W855B/70W855B 29
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1. In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to
Sony.
b. and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.
KDL-50W805B A-1