Professional Documents
Culture Documents
IG 77 MESC 14d - 2021
IG 77 MESC 14d - 2021
IG 77 MESC 14d - 2021
Introduction
Since the latest Internet version of MESC (version 14c), changes have been carried out in
MESC main group 77 including items from DEP 31.38.01.14-Gen piping classes.
1
Additional Documents
SPEs are updated to reflect the latest edition of the base standard with technical changes as
follows:
The changes to this document are to include requirements for the wall thickness of local areas,
for tapped or drilled area of the body neck region and handwheel clearance, exclude the 4th
edition of API 607 for the fire test and to clarify gland eyebolt pin retention.
The change is to update the handwheel clearance requirement, add qualification testing of
elastomers and exclude the 4th edition of API 607 for the fire test.
1.4 77/105 (BS 5154, gate, globe, check valves, copper alloy)
The changes to this document is to specify ASME B16.34 minimum wall thickness requirements
for tapped or drilled holes in body necks, add radius and surface finish requirements for flange-
to-body transition radius, to add handwheel dimensions/positioning requirements and to update
handwheel operator maximum allowable force and update wording of operator retention bolting.
Corrected reference to the base standard
The change is to change the revision of the base standard, exclude the 4th edition of API 607 for
the fire test, to add force requirements, to add handwheel clearance requirement and to add
qualification testing of elastomers.
The change is to add radius and surface finish requirements for flange-to-body transition radius,
clarify open/close indication of the valve, to add API 607 as an option for the fire test, to update
the operating force requirement, to ensure sufficient flange nut clearance adjacent to
body/closure bolting, to add angles to lever handles to avoid clashing when two valves are bolted
together, add handwheel clearance requirement, to add tapped or drilled hole requirement for
body neck region, to add gearbox orientation and to add qualification testing of elastomers.
The changes to this document are to add the requirements for handwheel clearance, to clarify
the local wall thickness requirements and to clarify the tapped or drilled hole requirements for
body necks, exclude the 4th edition of API 607 for the fire test and handwheel clearance and to
clarify gland eyebolt pin retention
2
Overlays: This revision to add the requirements for handwheel clearance, to clarify pressure
design compliant with ASME B31.3, to clarify requirements for tapped or drilled holes in the body
neck, to specify demonstration of the special tool for top entry ball valve disassembly, add angles
to lever handles to avoid clashing when two valves are bolted together, to clarify production
fugitive emission testing, torque measurements and functional testing for all QSL levels, to
modify Duplex and Super-Duplex Impact testing qualification level.
Underlays: This revision is to modify requirement for the provision of extension pup-pieces on
butt-weld end valves, removal of hollow section material restriction on handwheels and clarified
documentation requirements for QSL-4.
Overlays: This revision to add the requirements for handwheel clearance, to clarify requirements
for tapped or drilled holes in the body neck and to modify Duplex and Super-Duplex Impact
testing qualification level.
Underlays: This revision is to clarify requirement for gland eye bolt retention, to remove
requirement on Body-to-bonnet Joint and clarified documentation requirements for QSL-4.
Overlays: This revision to add the requirements for handwheel clearance, to clarify requirements
for tapped or drilled holes in the body neck and to modify Duplex and Super-Duplex Impact
testing qualification level.
Underlays: This revision is to clarify requirement for gland eye bolt retention, to remove
requirement on Body-to-bonnet Joint and clarified documentation requirements for QSL-4.
The change is to correct reference of DN 38 to DN 40, to modify applicable standards for design
and calculations for pressure-containing elements, to modify the operating force requirements, to
ensure sufficient flange nut clearance adjacent to body/closure bolting, to add the handwheel
clearance requirement, to clarify minimum wall thickness requirement, to add the requirement for
demonstration of the special tools for top entry ball valve disassembly, add angles to lever
handles to avoid clashing when two valves are bolted together, to include integral trunnion
covers in pressure containing parts definition, to clarify requirement for welding procedure
qualification of weld overlays on carbon steel lipseal housings, to harmonize pup-piece lengths
with IOGP, to add gearbox orientation, to add qualification testing of elastomers and to include
low pressure gas testing of soft seated valves.
1.12 77/131 (API 6D, through conduit slab and expanding gate valves)
The change is to correct reference of DN 38 to DN 40, to modify applicable standards for design
and calculations for pressure-containing elements, to clarify the minimum wall thickness
requirement, to modify the operating force requirements, to clarify requirement for welding
procedure qualification of weld overlay on carbon steel lipseal housings, to harmonize pup-piece
lengths with IOGP, to add gearbox orientation, to add qualification testing of elastomers, to
include low pressure gas testing of soft seated valves and to correct the gas testing clause
references.
1.13 77/132 (API 6D, swing and axial flow check valves)
The change is to correct reference to DN 38 to DN 40, to add the minimum wall thickness
requirement, to clarify requirement for welding procedure qualification of weld overlay on carbon
3
steel lipseal housings, to harmonize pup-piece lengths with IOGP and to add qualification testing
of elastomers.
The change is to update the revision of the base standard, to exclude the 4th edition of the API
607 as an option for the fire test, to add the minimum wall thickness requirement, to add the
handwheel clearance requirement, to add seat configuration table and to add qualification of
elastomers.
The change is complete re-write of the entire MESC SPE to make it an amendment/supplement
to IOGP S-730.
The change is to update the allowable stress criterion for stems, to add the handwheel clearance
requirement and to add qualification testing of elastomers.
1.19 77/170 (Process to Instrument Valves)
The update is to clarify bolt holes and slotted bolt holes requirements for DN 20 valves, to clarify
the minimum wall thickness requirement, add radius and surface finish requirements for flange-
to-body transition radius, to add qualification testing of elastomers and to add the lever clearance
requirement.
The change is to update the maximum size for lined ball and check valves and to lower the
minimum temperature of carbon steel valves with ASTM A105 or ASTM A 216 WCB/WCC, to
add the handwheel clearance requirement and to update handwheel operator maximum
allowable force. USC units are added where they were missing.
1.21 77/200 (Valves in low temperature and cryogenic services)
The changes are to align same MESC wording on force for seating and unseating.
1.22 77/212 (Valves in high temperature service)
The change is to correct the typo in the option for bolt sizing, addition of minimum heat
dissipation/lagging extension length up to 650 °C. and to update handwheel operator or lever
maximum allowable force.
1.23 77/213 (Valves in low temperature and cryogenic service with lagging extension)
This revision is to align same MESC wording on force for seating and unseating.
1.24 77/300 (procedure and techn. Spec. for DVT of Industrial valves)
4
The change is to add the requirements for documentation and strip down testing for top entry ball
valve.
1.25 77/300a (synopsis of procedure and techn. Spec. for DVT of Industrial valves)
The change is to editorially change “type acceptance testing” to “design validation testing” and to
remove dated reference to MESC SPE 77/312.
1.26 77/300b (Valve qualification range)
This revision includes revised codes for product standard in line with changes in design
specification for valves.
1.27 77/300C (synoptic tables)
TAT changed to DVT