Professional Documents
Culture Documents
Light Sensing Plant Print Layout
Light Sensing Plant Print Layout
Light Sensing Plant Print Layout
LIGHT SENSING
PLANT
Create an animated
potted plant responding
to light. Construct
leaves and petals for
the plant spring toward
or close from.
x 41 x 12 x 14
x1 x 18 x 19
x1 x1 x1
x3 x1 x2
For activities, lesson plans and
support material please go to:
LEARNING
P L AT F O R M learning.strawbees.com
PLANT BASE
2 Build 2 hexagons with 12
1 Bend 12 of the 3-leg connectors yellow straws
x 12 x2
x2
15 Add the batteries and connect the servo 16 Snap the clip
motor to the Robotics board. Align the on the
black cable with the marked arrow Robotics
board
MOVING MECHANISM
17 Click the servo motor and the Robotics Make a moving joint with 3 of the
18
board on opposite sides of base
1-leg connectors and fit 1 yellow
straw and 1 pink straw on legs
19 Slide a 1-leg connector on the yellow 20 Attach the servo arm to the motor
straw, fit the 1-leg servo arm after and slide the pink straw through
then slide the 1-leg connector over the hole of the 3-leg connector of
the arm to lock top
21 Take 3 of 3-leg connectors, 22 Take a 1-leg connector, fit in the pink
slide along the pink straw straw, and lock the 3-leg connectors on
leg inside pink straw
23 Take 12 of the 1-leg connectors and 6 24 Slide the beams on the yellow
orange straws to build 6 beams straws on top of base so they
are free to move
x6
PLANT LEAVES
22 Take 3 of the 1-leg connectors, click 2
21 Take 6 of the 1-leg connectors, 6 of beams together, build 3 leaves
the 2-leg connectors, 6 orange straws
and 6 yellow straws, build 6 beams
x6 x3
https://makecode.microbit.org/pkg/strawbees/pxt-robotic-inventions