Professional Documents
Culture Documents
Irrigation Tubing Setup Guide Internal
Irrigation Tubing Setup Guide Internal
Irrigation Tubing Setup Guide Internal
2. Spike the fluid bag and pinch the tubing below the
drip chamber
3. Ensure that arrows on tubing are pointing in same direction as arrows on pump head
4. Mount the tubing and ensure it is within the tubing track, within the
side hooks.
5. Push the tubing into the bubble sensor slot and close the door.
© Medical Device Business Services, Inc., 2020. All rights reserved. 163554-201223
CONFIDENTIAL. FOR INTERNAL USE ONLY. NOT FOR USE WITH ANY CONSUMER OR FOR EXTERNAL DISTRIBUTION.
Advanced Program | Irrigation Tubing Setup Guide
6. Close the door, ensuring the tubing remains within the track and bubble
sensor
7. Press and hold the Flush Button, until you see the image below.
• While flushing make sure to inspect the length of the irrigation line
for air bubbles
• Ensure the drip chamber is flowing once low flow has started.
10. Flush final time to ensure ablation catheter is primed and there are
not bubbles in the irrigation tubing or ablation catheter
© Medical Device Business Services, Inc., 2020. All rights reserved. 163554-201223
CONFIDENTIAL. FOR INTERNAL USE ONLY. NOT FOR USE WITH ANY CONSUMER OR FOR EXTERNAL DISTRIBUTION.