STANHOPE-SETA

www.stanhope-seta.co.uk London Street, Chertsey

Surrey, KT16 8AP
England

QUOTATION
To: Asbar for General Trading & Contracting Your Ref: Email
Office No.5-Floor 9 -Ali Tower Dated: 26/05/2021
Al Qibla- Block 10-Abdullah Al Mubarak St. Offer Date: 26/05/2021
P.O.Box 5459 Our ID: GD/SI34
SAFAT 13055
Kuwait

PLEASE QUOTE OUR REF: 21/05/205

Attention of: Norbett Gomes
email: norbet@asbarkw.com

Thank you for your enquiry, we have pleasure in submitting the following offer:

Item Prod Ref Qty Description Unit Price Total Price

UK Pounds UK Pounds

1 99700-6 1 Salt in Crude Analyser 3462.00 3462.00

Method(s): IP 265; ASTM D3230

* 0 to 430g/m3, 0 to 151 PTB (lb/1000 bbl)

* Pre calibrated for immediate use to ASTM D3230
* Salt concentration values displayed automatically
* No need for mixing of salt standards
* Typical test time of less than 30 seconds
* Moisture proof membrane touch screen with large keys
* Calibration modes allow verification using user standards
* RS232 - PC compatible
* Supplied with beaker and sensor support stands
* Optional bench top stand
* Interchangeable plug-in sensor
* Battery or mains power supply

SUPPLIED WITH: carry case, recharger, mains adaptor, beaker holder, sensor conncetion cable
with integral temperature probe, software, RS232 cable and instruction manual.

Optional Accessories

99690-0 1 Crude Oil Sampling Pipette 443.00

Includes 200 x 10 ml pipette tips, 100 x pipette filters, pipette and a
pipette bench top stand. UKAS calibration certificate available.
99701-0 1 Bench Stand 473.00

Suggested Spares

99690-001 1 Pipette Tips 10 ml (pack of 200) 60.00 60.00

99690-002 1 Pipette Filters (pack of 100) 60.00 60.00
99700-602 1 Glass Beaker (pack of 10) 118.00 118.00
99700-604 1 Replacement Probe and Sensor 299.00 299.00

Calibration & Verification

99703-0 1 SaltCheck Verification Tool 435.00 435.00

99704-001 1 ASTM D3230 Salts, Mixed Solution (Dilute Solution), 250 ml 431.00 431.00
99704-002 1 ASTM D3230 Oil, Refined Neutral 85.00 85.00

T: +44 (0)1932 564391 E: quotes@stanhope-seta.co.uk F: +44(0)1932 568363

Registered No: 361699
 STANHOPE-SETA
www.stanhope-seta.co.uk London Street, Chertsey
Surrey, KT16 8AP
England

2 90000-3 1 Seta Oil Test Centrifuge - 4 place 7634.00 7634.00

Method(s): ASTM D91; ASTM D893; ASTM D1290; ASTM D1796; ASTM D2273; ASTM D2709; ASTM D2711; ASTM D4007; ISO
3734; ISO 9030

• Conforms to safety requirements IEC 1010-1; 1010-2-D

• 4 place swing out rotor
• Static, near vertical bucket positioning
• Specifically designed for testing oils
• Heated chamber, ambient to 80°C
• Membrane ‘touch’ control panel
• Pre-heat facility to ensure bowl is at test temperature prior to test
• Universal buckets for 12.5 ml, 6 and 8 inch glassware
• Optional Setafuge Hazard Reduction System
• Microprocessor control with 99 memories
• Optional trolley
• Isothermal heaters fitted internally to the centrifuge chamber
• Temperature control using unique algorithm to compensate for air resistance heating

SUPPLIED WITH: Rotor, Buckets and tube cushions.

SELECTION OF ACCESSORIES:

1) Bucket adaptors and tubes should be selected according to test method requirements.
2) 90001-2 & 90040-0 are shown below as 'Required Accessories', these are specified for ASTM
D91; D893; D1796; D2711; D4007 test methods.

Required Accessories

90001-2 1 Bucket Adaptor for 90040-0 & 90060-0 (pack of 4) 480.00 480.00
90040-0 1 Tube 8 inch x 100 ml cone-shaped (Pack of 6) 393.00 393.00

Optional Accessories

90002-0 1 Adaptor for 90012-0 Centrifuge Tube (Pack of 4) 884.00

90003-2 1 Bucket Adaptor for 90050-0 (Pack of 4) 884.00
90005-2 1 Bucket Adaptor for 90011-0 Tube (pack of 4) 522.00
90010-0 1 Setafuge Hazard Reduction System 2415.00
90011-0 1 Tube 6 inch x 100 ml cone-shaped (pack of 6) 445.00
90012-0 1 Centrifuge Tube 12.5 ml (Pack of 6) 266.00
90014-0 1 Low Level Centrifuge Trolley 1267.00
Height 28 cm alone or 68 cm including Centrifuge, fitted with lockable
castors
90015-0 1 High Level Centrifuge Trolley 1467.00
59 cm height alone or 99 cm including Centrifuge, fitted with lockable
castors
90016-0 1 Transformer for 120 V 60 Hz Operation 978.00
90041-2 1 Stoppers (Pack of 50) 49.00
90050-0 1 Tube 6 inch x 100 ml pear-shaped (Pack of 6) 414.00
90060-0 1 Tube 8 inch x 100 ml trace-sediment (pack of 6) 414.00
90200-5 1 Water Bath 2727.00
90202-3 1 5 Place Rack 196.00
for use with 6 inch, 90011-0 tubes
90203-3 1 6 Place Rack 194.00
For use with 8 inch 90040-0 or 90060-0 tubes
90300-2 1 Seta Block Heater 1350.00
Includes: block extractor tool, mains lead and instruction manual
90301-2 1 Block for Seta Block Heater 1055.00
Holds four cone-shaped tubes (8 inch x 100 ml, reference 90040-0) or
four trace-sediment tubes (100 ml, reference 90060-0)
99100-2 1 Analytical Balance 2843.00

T: +44 (0)1932 564391 E: quotes@stanhope-seta.co.uk F: +44(0)1932 568363

Registered No: 361699
 STANHOPE-SETA
www.stanhope-seta.co.uk London Street, Chertsey
Surrey, KT16 8AP
England

Suggested Spares

90000-301 8 Bottom Cushions (pack of 2) 27.00 216.00

Calibration & Verification

82012-0 1 Thermometer Digital: -199 to 199 °C UKAS Calibrated 568.00 568.00

Range -199 to +199 °C. Accuracy ±0.05 °C. Resolution 0.01 °C. 5 point
UKAS calibration at 30, 37.8, 55, 90 and 150 °C
99960-2 1 Digital Photo Tachometer 473.00 473.00

Charge for packing 90000-3 160.00 160.00

3 90100-0 1 Seta Oil Test Centrifuge - 6 place 8774.00 8774.00

Method(s): ASTM D91; ASTM D893; ASTM D1290; ASTM D1796; ASTM D2273; ASTM D2709; ASTM D2711; ASTM D4007; ISO
3734; ISO 9030

• Conforms to safety requirements IEC 1010-1; 1010-2-D

• 6 place swing out rotor
• Static, near vertical bucket positioning
• Specifically designed for testing oils
• Heated chamber, ambient to 80°C
• Pre-heat facility to ensure bowl is at test temperature prior to test
• Universal buckets for 12.5 ml, 6 and 8 inch glassware
• Optional Setafuge Hazard Reduction System
• Microprocessor control with 99 memories
• Optional trolley
• Isothermal heaters fitted internally to the centrifuge chamber
• Temperature control using unique algorithm to compensate for air resistance heating

SUPPLIED WITH: Rotor, Buckets and tube cushions.

SELECTION OF ACCESSORIES:

1) Bucket adaptors and tubes should be selected according to test method requirements.
2) 90001-2 & 90040-0 are shown below as 'Required Accessories', these are specified for ASTM
D91; D893; D1796; D2711; D4007 test methods.

Required Accessories

90001-2 2 Bucket Adaptor for 90040-0 & 90060-0 (pack of 4) 480.00 960.00
90040-0 1 Tube 8 inch x 100 ml cone-shaped (Pack of 6) 393.00 393.00

T: +44 (0)1932 564391 E: quotes@stanhope-seta.co.uk F: +44(0)1932 568363

Registered No: 361699
 STANHOPE-SETA
www.stanhope-seta.co.uk London Street, Chertsey
Surrey, KT16 8AP
England

Optional Accessories

90002-0 1 Adaptor for 90012-0 Centrifuge Tube (Pack of 4) 884.00

90003-2 1 Bucket Adaptor for 90050-0 (Pack of 4) 884.00
90005-2 1 Bucket Adaptor for 90011-0 Tube (pack of 4) 522.00
90010-0 1 Setafuge Hazard Reduction System 2415.00
90011-0 1 Tube 6 inch x 100 ml cone-shaped (pack of 6) 445.00
90012-0 1 Centrifuge Tube 12.5 ml (Pack of 6) 266.00
90014-0 1 Low Level Centrifuge Trolley 1267.00
Height 28 cm alone or 68 cm including Centrifuge, fitted with lockable
castors
90015-0 1 High Level Centrifuge Trolley 1467.00
59 cm height alone or 99 cm including Centrifuge, fitted with lockable
castors
90016-0 1 Transformer for 120 V 60 Hz Operation 978.00
90041-2 1 Stoppers (Pack of 50) 49.00
90050-0 1 Tube 6 inch x 100 ml pear-shaped (Pack of 6) 414.00
90060-0 1 Tube 8 inch x 100 ml trace-sediment (pack of 6) 414.00
90202-3 1 5 Place Rack 196.00
for use with 6 inch, 90011-0 tubes
90203-3 1 6 Place Rack 194.00
For use with 8 inch 90040-0 or 90060-0 tubes
90300-2 1 Seta Block Heater 1350.00
Includes: block extractor tool, mains lead and instruction manual
90301-2 1 Block for Seta Block Heater 1055.00
Holds four cone-shaped tubes (8 inch x 100 ml, reference 90040-0) or
four trace-sediment tubes (100 ml, reference 90060-0)
99100-2 1 Analytical Balance 2843.00

Suggested Spares

90000-301 1 Bottom Cushions (pack of 2) 27.00 27.00

Calibration & Verification

82012-0 1 Thermometer Digital: -199 to 199 °C UKAS Calibrated 568.00 568.00

Range -199 to +199 °C. Accuracy ±0.05 °C. Resolution 0.01 °C. 5 point
UKAS calibration at 30, 37.8, 55, 90 and 150 °C
99960-2 1 Digital Photo Tachometer 473.00 473.00

Charge for packing 90100-0 160.00 160.00

TERMS
Power Supply Where applicable we have quoted suitable for a power supply of 240V 50Hz, please advise if your
requirements are different.
Price Unless stated otherwise, all prices are quoted nett ex-works in pounds sterling and include packing
suitable for airfreight. All prices are exclusive of VAT which will be charged where applicable.
Validity Prices are valid for 90 days from offer date
Shipment 4-6 weeks from receipt of order (to be confirmed at time of order)
Warranty 18 months from date of leaving our factory
Discount Please note 90000-3 & 90100-0 is subject to 15% discount, for all other items 20% discount applies
Freight Cost Delivery cost extra
Documentation Standard shipping documents are included and any specialised document requirements will be charged
extra.
Payment Proforma Invoice
Bank The Royal Bank of Scotland
62-63 Threadneedle Street
London
EC2R 8LA
Sort code 16-00-15
Account number 23187615
Swift code RBOSGB2L
IBAN number GB32RBOS16001523187615
Please note END USER DECLARATION: All offers are subject to International Export Sanctions based on country
of destination provided to us. We may request an 'End User Declaration' to be completed by the final
user prior to acceptance of any resulting Contract/Order.

T: +44 (0)1932 564391 E: quotes@stanhope-seta.co.uk F: +44(0)1932 568363

Registered No: 361699