This inspection plan outlines quality control procedures for a 3000 unit lot using ANSI/ASQ Z1.4 standards. It specifies normal, tightened, and reduced sample sizes for characteristics inspected at Level I with an AQL of 0.65% using inspection level H, and at Level S-1 with an AQL of 0.65% using inspection level C.
This inspection plan outlines quality control procedures for a 3000 unit lot using ANSI/ASQ Z1.4 standards. It specifies normal, tightened, and reduced sample sizes for characteristics inspected at Level I with an AQL of 0.65% using inspection level H, and at Level S-1 with an AQL of 0.65% using inspection level C.
This inspection plan outlines quality control procedures for a 3000 unit lot using ANSI/ASQ Z1.4 standards. It specifies normal, tightened, and reduced sample sizes for characteristics inspected at Level I with an AQL of 0.65% using inspection level H, and at Level S-1 with an AQL of 0.65% using inspection level C.
This inspection plan outlines quality control procedures for a 3000 unit lot using ANSI/ASQ Z1.4 standards. It specifies normal, tightened, and reduced sample sizes for characteristics inspected at Level I with an AQL of 0.65% using inspection level H, and at Level S-1 with an AQL of 0.65% using inspection level C.
A given characteristic is inspected per the following plans for a 3000 units lot.
Using ANSI/ASQ Z1.4, Level I 0.65% AQL
Letter H Normal inspection: 80 Tightened inspection: 125 Reduced: 32 Using ANSI/ASQ Z1.4, Level S-1 0.65% AQL Letter C Normal inspection: 20 Tightened inspection: 32 Reduce:8