Professional Documents
Culture Documents
Instruction manual-新款
Instruction manual-新款
Instruction manual-新款
User’s Manual
Model: HP-003
Shenzhen Fast To Buy Commerce Co., Ltd.
www.fasttobuy.com
Email: service@fasttobuy.com
TOAUTO 1
TOAUTO Handheld Inkjet Printer
2. Settings:........................................................................................................................ ......... 7
3. text............................................................................................................................................8
4. data................................................................................................................................. ........8
5. image.............................................................................................................................. ....... 9
6. Barcode................................................................................................................... .............. 9
7. Counter................................................................................................................................ ...9
8. Printing settings.......................................................................................................................10
9. Nozzle setting.........................................................................................................................11
TOAUTO 2
TOAUTO Handheld Inkjet Printer
TOAUTO 3
TOAUTO Handheld Inkjet Printer
A .Printer structure:
B. Printing principle:
Unlike traditional printers, Inkjet Printers print ink on the printed matter and do not contact with the
The encoder determines the distance of the front wheel to control the inkjet. If the encoder is
used for printing, the encoder roller must contact with the printed matter.
TOAUTO 4
TOAUTO Handheld Inkjet Printer
2. Distance printing
Distance printing means that the roller is sprayed once after the roller has been rotated for a
distance, and the distance of the printing is fixed. In the "Print Settings", find the "Distance Switch"
and control the "Continuous Print Interval" to control the interval size (mm).
Time-delay printing is often used for printing on the assembly line. In the "Print Settings", find
"photoelectric switch" and turn on, control printing with delay time.
Color Black.
Weigh 0.9KG
(3) If you have any questions, please contact 24 hours customer service.
TOAUTO 5
TOAUTO Handheld Inkjet Printer
Edit: Edit the printed text content. Click on the content in the document, and edit it.
Open: Open the printed text in the local or USB flash drive
TOAUTO 6
TOAUTO Handheld Inkjet Printer
Add:
time.
Image: Insert picture (U disk picture, commonly used pictures inside the machine)
2. Settings:
TOAUTO 7
TOAUTO Handheld Inkjet Printer
Nozzle: Set the nozzle direction, nozzle voltage, inkjet density, flashing time
Data export: Export the document data in the machine to the U disk
Reset: Restoring the factory setting will delete all settings and data. At the seam time, the
UI Update: Update the interface using the USB flash drive activation program
3. Text
4. Date
TOAUTO 8
TOAUTO Handheld Inkjet Printer
5. image
Native: Import built-in images
6. Barcode
Variable barcode and QR code
The content is fixed by barcode and QR code and the editing method is similar
to "text" editing.
TOAUTO 9
TOAUTO Handheld Inkjet Printer
The content is fixed by bar code and QR code and the editing mode is similar to
Https://jingyan.baidu.com/article/20b68a8891b75e796cec62ab.html
7. Counter
TOAUTO 10
TOAUTO Handheld Inkjet Printer
High-level addition: The default is: high-level supplement 0, when the current print
8. Printing settings
sensor
9. Nozzle setting
TOAUTO 11
TOAUTO Handheld Inkjet Printer
Print Darkness: Adjust the concentration of inkjet (1~9. The higher the value, the higher
Idle Spray time: Customized printing to prevent nozzle clogging, the default is 00, which is
Nozzle selection: Left and right nozzles are freely selectable (if one of the nozzles is
Directional printing: Change the printing order and start printing in reverse.
TOAUTO 12
TOAUTO Handheld Inkjet Printer
loading and unloading of the ink cartridge must be performed in the off state. The
②The capacity of the ink cartridge is generally 40ml, and it can print 845 sheets of
A4 continuously at 5% coverage.
③ When the ink cartridge has no ink, there is no water sound when it is shaken.
④ If the ink cartridge is not in use, it must be covered with a cover. After the ink
cartridge is torn open and sealed, it is best to use it within 3-4 months.
⑤ Ink printing onto plain paper requires only 3S drying, but the drying time
depends on the material, and the material with poor water absorption will last a
little longer.
(1) The ink cartridge can be jammed on cardboard or white paper and printed
(2) Wipe the nozzle with a cotton swab soaked in alcohol or a paper towel, or
soak it in alcohol.
(3) In the “Settings”, find “Flash Time” and set to 10, then print again.
(4)Find the "sprinkler setting" exchange "left and right nozzle" in "Settings"
(2) Press and hold the screen at boot time, then turn it on to enter the calibration.
(3) Screen alignment problem: generally caused by external force pressing which
caused by screen deformation (PS: When correcting, use a stylus to point the target.)
(4) Never use sharp objects to tap the screen, and it is easy to scratch the screen and
(5) The resistor screen is used. Due to climatic reasons and transportation reasons, the
TOAUTO 13
TOAUTO Handheld Inkjet Printer
(4) Adjust to the size you want (up to 150 pixels) [key]
(6) View the created Bmp and right click on “Properties” to see if “Detailed
printing on plastic bottles, printing on the bottle cover, etc. You need to use a fixed plate.
(1) Loosen the upper four fixing screws of the fixing plate.
(2) Align the ink outlet of the handheld inkjet printer with the fixed plate print port.
(3)After alignment, lock the two screws on the upper positioning plate.
(4)Lock the screws on the side positioning plate again (as shown)
(6) Align the print position. Use the machine to debug the print position. After that,
TOAUTO 14
TOAUTO Handheld Inkjet Printer
Solution:
(2) When using handheld printing, you can't use down force, just move.
TOAUTO 15
TOAUTO Handheld Inkjet Printer
procedure.
(2) If you found that the printing was not clear in the printing process, you can adjust the
inkjet density.
(3)Print defects, adjust the inkjet head (left and right inkjet head adjustment) or use
(4) The best distance for printing is 2-5mm. If it is too large, there is no way to print it:
(5) Printing needs to print at a straight line, otherwise the printed content is easily
deformed.
(6) When using the encoder to print, you need to determine if the encoder belt is
(7)The default factory setting has been adjusted to the best hand-held state, and the ink
TOAUTO 16
TOAUTO Handheld Inkjet Printer
(2) Mount the photoelectric sensor and the machine on the right angle of the
photoelectric.
TOAUTO 17
TOAUTO Handheld Inkjet Printer
Note: The photoelectric sensing distance is 5-40cm, which is determined by the environment
and the surface color of the object. The smaller the inductive sensing distance of the darker
In the settings, select the start signal in the "Print Settings" and select "Photoelectric
(2)Encoder control:
The encoder determines the distance of the front roller to control the inkjet. If the
encoder is used for printing, the encoder roller must contact with the printed matter.
(3)Timing control:
Time-delay printing is often used for printing on the assembly line. In the "Print
Settings", find "photoelectric switch" and turn on, control printing with delay time.
Distance printing means that the roller is sprayed once after the roller has been rotated
for a distance, and the distance of the printing is fixed. In the "Print Settings", find
"Distance Switch" to open and operate the "Continuous Print Interval" to control the
TOAUTO 18
TOAUTO Handheld Inkjet Printer
(3)The timing speed is adjusted according to the speed of the pipeline equipment.
5m/min 600
10m/min 1200
20 m/min 2400
30 m/min 3600
40 m/min 4800
50 m/min 6000
65 m/min 7800
2. Commissioning phase
Conveyor speed and coding speed are related. The faster the conveyors speed, the
(1)Look at the position of the print before the drip or after the drip. After the drop, the
"photoelectric delay" is too large, it needs to be small, put the light head close to the
(2) Photo electrically senses when the object passes, it will flash. If the photoelectric
light is long, the photoelectric will be raised or tilted 45 degrees. The photoelectric
sensing distance is 5-40cm, which is determined by the environment and the surface
color of the object. The smaller the inductive sensing distance of the darker color, the
TOAUTO 19