Professional Documents
Culture Documents
Separador de Gas
Separador de Gas
¡i¡ DRILCO
See-Flo Degasser
t
12"
69"
21"
20/." Oia.
!
t
101/2' long
36"
ADJUST ABLE
Sld. Pit - S1"-63"
Deep Pil - 7S" -87"
Sld. Pil-69"
Oeep Pit-93"
Inlet
Screen I 32"
1-2 3/82
í
Si; DRJLCO
See-Flo Degasser
from
([ flow line
t
Swing Elbow Type Return Une
1-8 1/80
\
See-Flo Degasser
Adjust Depth of Degasser in Pit l. Locate the unit enough off the bottom
of the pit (2-ft. minimum) lO prevent solids
Brackets can be bolted in place at six build up in pump.
difTerent height positions. Bracket placement
determines the depth ofthe unit in the pit. The 2. Elevate spray tank enough to establish
series of mounting holes on the riser pipe and downward slope of the trough so that fluid
pump frame permits a total adjustment of 15". flows through it by gravity to the next pit.
Existing rig framework can also be modified to
support brackets at higher or lower levels. . 3. Top ofpump frame tube must be above
When establishing depth of the unit in the pit, the highest potential mud level.
refer to Figure 9 and follow these rules:
Move brackets I
.. . up to lower unit in pit and
down to raise unít in pit.
Pump
Frame
Tube
Brackets moved down,
raises degasser.
Locate off bottom and out of solids
1/80 1-7