Professional Documents
Culture Documents
Jsa GRIT BLASTING
Jsa GRIT BLASTING
03
Jindal Steel & Power Limited
(Occupational health &Safety Department)
1
OHSM -02.03
Jindal Steel & Power Limited
(Occupational health &Safety Department)
3 Blasting operation a)Flying dust ,spread a)Blaster shall wear blasting suit
up of blasting and compressor operator and
materials. other persons shall wear masks
b) Hose bursting. and goggles.
c) Fire Hazards and
b)Area should be wet .Blasting
health hazards.
work area to be enclosed and
properly ventilated.
c) Condition of all hose pipes
couplings to be checked for
damage ,leakage before blasting.
d)Compressor operator shall
always be present at work place ,so
that the blasting activity can be
stopped immediately in case of
hose bursting.
e) Always maintain correct
pressure.
f) Blasting does not take place with
a coiled hose.
g) Pin holes are not taped in the
blast hose . The hose will enlarge
quickly and will cause a blow out.
h) Blast hoses are coiled and stored
away from water , oil and
chemicals to prevent rotting .
i) Coupling fit to be checked.
j) Screw provided by the coupling
2
OHSM -02.03
Jindal Steel & Power Limited
(Occupational health &Safety Department)
Prepared By :-
Reviewed By :-
Approved By:-