Professional Documents
Culture Documents
Simulacion 2
Simulacion 2
Simulacion 2
31. Click the Value (-any-) drop-down arrow. View your options.
32. Select Plastics. You can perform a general search or customize your search on
physical properties of the material.
Find Similar Material
Materials Material Class Elastic Mod.- Poisson's R... Shear Mod... Thermal Ex... Density Thermal Co... Specific Heat Tensile Stre... Yield
Stren..
Property IJn...
Select a Similar Material from the provided list. You can find similar materials
based on the following Properties: Material Class, Thermal Expansion
Coefficient, Specific Heat, Density, Elastic Modulus, Shear Modulus, Thermal
Conductivity, Poissons Ratio, Tensile Strength and Yield Strength. The
definitions are listed at the end of the chapter.
Page 6 - 15
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
36. Click inside the top left box (Show Selected Only) as illustrated.
The selected materials are displayed with their properties.
View the Environment Impact for the alternative materials.
37. Click the ABS material row as illustrated. View the results. The
material is lower in Carbon Footprint, Energy Consumption, Air
Acidification and Water Eutrophication than Nylon 6/10. Your
numbers may vary depending on your release and version year.
What is important is the trend.
Find Similar Material x
Materials Material Class Elastic Modm Poisson's Shear Mod.„ Thermal Ex.„ Density Thermal co... Specific Heat Tensile Stre... Yield Stren...
N/mA2 N/A N/mA2 /K kg/mA3 W/(m.K) J/(kg.K) N/mA2 N/mA2
2e+09 0.394 3.189@+08 1020 0.2256 1386 3e+07
2.41e+09 0.3897 8.622e+08 1070 0.2618 1900 4e+07
nmental Irnoact
Units
38. Click the ABS PC material row. View the results. You decide to stay
with Nylon 6/10 due to cost and other design manufacturing
issues. Your numbers may vary depending on your release and
version year. What is important is the trend.
Find Similar Material x
Materials Material Class Elastic Mod.„ Poisson's R... Shear Mod... Thermal Ex... Density Thermal Co... Specific Heat Tensile Stre... Yield
Stren...
N/mA2 N/A N/mA2 kg/mA3 W/(mK) J/(kgk) N/mA2 N/mA2
Environmental Impact
Manufacturinq Process
Original Inj
ection Molded
Page 16
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
6-
39. Click the Cancel button from the Find Similar Material Manufacturinq Process
dialog box. Injection Molded
Units
Sl - N/m A 2 (Pa)
Run a Report.
40. Click the Save As or the Generate Report button as
illustrated depending on your SOLIDWORKS version.
SOLIDWORKS provides the ability to communicate Accept Edit C ncel Hel
p
this report information throughout your
organization. Sustainability generates a report that
will compare designs (material, regions) and
explain each category of Environmental Impact
and show how each design compares to the Base
line.
Sustainability Output
41. Click OK. File type:
Report - Generate a Sustainability report in .docx format
File name:
CLAMP2
You can't generate a report if Microsoft Word is Save file to:
running.
42. Review the Generated report. Ctrl Click here for
alternative units such as Miles Driven In a Car.
View the results. Note: Internet access is required
Close the Report and part. You are finished with this
section. Model-Name:.ä CLAMP2Ä
Nylon 6/100
We'ght n
Manutactunr,qproce€fi Customa
SurfaceAte-aa 7164.92tnm'p
Reglon1
Thechoice oimanufacturmq regiondeterminegtheenergy
sourcwand technolcqiesused the creatronand
Page 6 - 17
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
term
SOUDWORKS I SUSTAINABILITY
Sustainable Design Guide Sustainable Design SolidWorks Sustainability Community
Print
use I Privacy
Corp.
NEXT
STEPS
&Get a Quote
Contact
Toy Sales
Get
Certifie
d
Summary
The main requirement for
obtaining the CSWA-SD
certification is to take and pass the
on-line 30 minute exam (minimum of 24 out of 30 points).
Download the
http://www.SOLIDWORKS.com/sustainability/sustainable -
design-guide.htm to learn and answer these questions and
to apply your knowledge for the CSWA-SD certification
exam. SOLIDWORKS does not require that you have a copy
of SOLIDWORKS Sustainability, or even
SOLIDWORKS.
Page 6 - 18
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
Page 6 - 19
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
6. A focus on product design that ensures the ultimate recyclability of a product you're
developing is a sustainable design technique most specifically called:
A. Design for Environment (DÆ).
B. Design for Disassembly (DfD).
C. Life Cycle Assessment (LCA).
D. Design for Total Life Assessment (TLA).
7. The sustainable design technique that promotes systematically using natural inspiration
and technologies found in nature to design products is known as:
A. Biomimicry.
B. Cradle to Cradle.
C. Environmental Management System (EMS).
D. Intelligent Design.
8. The sustainable design technique that can most simply be characterized by the concept
that the waste from one entity equals the food of another is:
A. Cradle to Cradle.
B. Design for Disassembly (DfD).
C. Life Cycle Assessment (LCA).
D. Intelligent Design.
Page 6 - 20
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
9. The sustainable design technique that focuses on re-formulating the raw materials we
use to design out their toxicity and environmental impacts is known as:
A. Green chemistry.
B. Design for Environment (DfE).
C. Life cycle assessment (LCA).
D. Cradle to cradle.
Page 6 - 21
Certified SOLIDWORKS Associate Sustainable Design Associate (CSWA-SD)
14. The "global warming potential" (GWP) from greenhouse gases emitted throughout
a product's lifecycle, such as carbon dioxide and methane, is a measure of the product's
tendency to affect:
A. Human toxicity.
B. Climate change.
C. Ionizing radiation.
D. Air acidification.
15. The following: "(1) raw material extraction, (2) material processing, (3) part
manufacturing, (4) assembly, (5) transportation, (6) product use, and (7) end of life"
describes a product's:
A. Environmental indicators.
B. Metrics.
C. Lifecycle stages.
D. Good times.
Page 6 - 22
CHAPTER 7 - CERTIFIED
SOLIDWORKS ASSOCIATE
SIMULATION (CSWA-S)
EXAM
Certified SolidWorks Simulation Associate: Examination Information
Examination Information
DS SOLIDWORKS
- Your exam is: 20 questions divided into hands-on and multiple choice questions.
- You are allowed to answer the questions in any order you prefer. You may answer other questions while an
analysis is running.
- use the Summary Screen to see the list of all questions you have or have not answered.
- Once you click End Test you will not be able to return to your questions.
- You will have: 120 minutes to complete this examination.
- Minimum passin score is: 70.
- Your proctor is:
- For all numerical answer. a reasonable percentage or error is allowed to account for various
sources of discrepancies.
Good luck!
Start Examination
Chapter Objective
Provide in-depth coverage of the material in the
Certified SOLIDWORKS Associate - Simulation (CSWA-
S) exam. Knowledge to create and modify models,
exam layout, question types and grading procedure.
71
-Simulation
The questions consist of 4 hands-on problems (13 points, 7 points, 5points and 20
points) single answer, and the rest are multiple-choice questions for a total of 100
points.
Point allocation ranges from 3 points to 20 points, depending on the difficulty. A passing
grade is 70% (70 out of 100) or higher.
You are allowed to answer the questions in any order. Use the Summary Screen during
the CSWA-S exam to view the list of all questions you have or have not answered.
(beam, solid, shell) apply and modify fixtures Contact Visualization Plot Interaction Viewer
Contact set Local interaction
types, loads types, and results. You need to Component contact Component interaction
enter the answer in the correct units with Global contact Global interaction
Page -
Table 1 displays the User Interface
updates for Contact terms between
SOLIDWORKS 2020 and 2021. The CSWA-S
exam uses the older contact terms. The
older terms are used in this chapter.
7
Certified SolidWorks
Simulation
Summary DS SOLIDWORKS
SOLIDWORKS
2019
SOLIDWORKS
2020
SOLIDWORKS
2021
2
Page -