Professional Documents
Culture Documents
Periodical Service KOMATSU D155-6: Maintenance Sheet
Periodical Service KOMATSU D155-6: Maintenance Sheet
Engine Model Engine SN Type of Attachment Every Every Every Every Every
Information
250h 500h 1000h 2000h 4000h
Code 1 2 3 4 5
Filling Instruction : Below are the items related to the operation, maintenance and lubrication of this unit. To be serviced at periodic service and additional services
The operation & Maintenance Manual details all items to maximize machine availability
: Item to be serviced Result of Inspection : Good Condition X : Bad Condition : Correction Made
( )( )( )
FORM NO.
Engine Model Engine SN Type of Attachment Every Every Every Every Every
Information
250h 500h 1000h 2000h 4000h
Code 1 2 3 4 5
Filling Instruction : Below are the items related to the operation, maintenance and lubrication of this unit. To be serviced at periodic service and additional services
The operation & Maintenance Manual details all items to maximize machine availability
: Item to be serviced Result of Inspection : Good Condition X : Bad Condition : Correction Made
1 End bit and cutting edge Check wearness; reverse or replace if necessary
•••••
2 Blade Arm ball joint Greasing blade arm ball joint 1 pcs
•••••
3 Tilt cylinder ball joint Greasing tilt cyilinder ball joint 1 pcs
•••••
4 Pitch cylinder ball joint Greasing Pitch cylinder ball joint 1 pc
•••••
5 Lift cylinder suport yoke Greasing Lift cylinder suport yoke 4 pcs
•••••
6 Lift cylinder suport shaft Greasing Lift cylinder suport shaft 2 pcs
•••••
7 Ripper Tilt cylinder bottom pin Greasing Ripper Tilt cylinder bottom pin 1 pcs
•••••
8 Ripper Lift cylinder bottom pin Graesing Ripper Lift cylinder bottom pin 1 pcs
•••••
9 Ripper Tilt cylinder rod end Graesing Ripper Tilt cylinder rod end 1 pcs
•••••
10 Ripper Lift cylinder rod end Greasing ripper Lift cylinder rod end 1 pcs
12 Equalizer bar side shaft Greasing equalizer bar side shaft 2 pcs
•••••
13 Equalizer bar centre shaft Greasing equalizer bar centre shaft 1 pca
•••••
14 Recoil spring Check oil level recoil spring
•••
15 Final drive oil Check level, add if necessary and take oil sample for PAP
•••••
16 Final drive oil Change oil final drive case 31 ltr (each)
••
17 Frame Check pivot bearing oil level
••
18 Idler clearance Check clearance; adjust if necessary
•••
19 Idler oil level Check level; Add oil
••••
20 Engine oil Change engine oil 37 ltr
••••
21 Universal Joint (Drive Shaft) Greasing universalo joint 2 pcs
•••
22 Power train oil Change power train oil 70 ltr
•••
23 Power train strainers Clean strainers
•••
24 Power train case breather Clean breather from dust with diesel oil
•••
25 Hydraulic oil Change hydraulic oil 85 ltr
••
26 Damper case Change oil damper, clean damper breather 1,5 ltr
••
27 Vibration damper Check for crack or peeling in the outside surface of the rubber
••
28 Fuel strainer Clean from dirt and sediment fuel filter
•••
29 All attachement Check condition (crack,worm,leak)
•••••
Mechanic Leader Supervisor
( )( )( )