Professional Documents
Culture Documents
Ormoc Traffic Pattern Procedures
Ormoc Traffic Pattern Procedures
1 MILE
17
1
11. A-beam Threshold 18 4 11. A-beam Threshold 18
6 1
White Arc Check 1 White Arc Check
17. OTA, ID, Landed 5
Flaps 1 11
1 Proceeding to Indiana 18 11 Flaps 1
1
Ramp 16. Positive RWY, Power Idle
16
Slowly apply brakes 001 Pitch down to maintain 65KTS
Full Elevators to 00
Level off when RWY widens on
prevent Shimmy 00
Windshield
Wing Flaps Fully Retract Slowly Add Back Pressure
Transponder to STBY (Flaring)
Power to 1100RPM
12. Power 2100RPM when Taxi Speed is 15. Flaps 3 when Wings are 12. Power 2100RPM
Landing Lights On achieved Level Landing Lights On
OTA, ID, Turning Left 18. OTA, ID, RWY Must be 600ft at this OTA, ID, Turning Right
Base 18 for Full Stop Vacated 15 specific point Base 18 for Full Stop
1
12 Maintain 65KTS 12 Landmark U-RIVER
1 1
13 14 13
1
13. Flaps 2 when Wings are Level 14. OTA, 1ID, Turning 13. Flaps 2 when 1Wings are Level
Power 2100RPM Finals 18 for Full Stop Power 2100RPM
Airspeed 70KTS Must be 700ft before Airspeed 70KTS
turning Finals Landmark 2 White Roofs