Professional Documents
Culture Documents
Epc Hse Mem 012
Epc Hse Mem 012
In Line with the Republic Act 9003 also known as Ecological Solid Waste
Management Act, under Section 33, we are mandated that all project must have a
designated area for the generated waste of each project site. Standard category for
proper segregation is align to the construction waste given below:
Metal Scrap
- Rebars
- Mixed metals (C-purlins, pipes, angle bars, galvanized Iron, Wire
Mesh, Architectural Frames)
- Other if any
Wooden Scrap
- Phenolic Boards
- Dimensional lumber
- Corrugated cardboards and Papers
- Other if any
Debris
- Concretes
- Rocks
- Damage Bricks
- Other if any
Plastic Scrap
- Plastic Bottles
- Other if any
Hazardous waste
- LED Lights
- Medical waste
- Empty paint gallon/ spray
- Other if any
Sample design are as follows:
HAZARDOUS WASTE
Empty Paint
Gallon/Spray
LED light
Actual size and design of the MRF will be depends on the project capacity.
All Site HSSE Team are mandatory required to send their compliance report with
attached photos and visible signages in front of the area.
Prepared by:
Noted by:
Joselito Agawin
HSE Manager
MCC-Head Office
Rey Castillo
HSSE Head,EPC
Approved by:
Frederick Tan
Deputy Head Construction, EPC