Professional Documents
Culture Documents
01b EasyIO FS20 Installation v1
01b EasyIO FS20 Installation v1
1
EasyIO FS20 – Installation Guide v1.0
2
EasyIO FS20 – Installation Guide v1.0
Disclaimer
Confidentiality Notice
The information contained in this document is confidential information of EasyIO Holdings Pte Ltd. Such
information and the software described herein, is furnished under a license agreement and may be used
only in accordance with that agreement.
The information contained in this document is provided solely for use by EasyIO Holdings Pte Ltd
employees, licensees, and system owners; and, except as permitted under the below copyright notice, is
not to be released to, or reproduced for, anyone else.
While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not
responsible for damages of any kind, including without limitation consequential damages, arising from
the application of the information contained herein. Information and specifications published here are
current as of the date of this publication and are subject to change without notice. The latest product
specifications can be found by contacting our corporate headquarters or support channel.
Trademark Notice
BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air-
Conditioning Engineers. All other product names and services, mentioned in this publication, that are
known to be trademarks, registered trademarks, or service marks are the property of their respective
owners.
Disclaimer
The material in this manual is for information purposes only. The contents and the product it
describes are subject to change without notice. EasyIO Holdings Pte Ltd makes no
representations or warranties with respect to this manual. In no event shall EasyIO Holdings Pte Ltd be
liable for any damages, direct or incidental, arising out of or related to the use of this manual.
3
EasyIO FS20 – Installation Guide v1.0
Table of Contents
Introduction ....................................................................................................................................................5
Dimension .......................................................................................................................................................5
Physical Installation Instructions ....................................................................................................................7
Opening the Top Cover .................................................................................................................................10
Micro SD Card Installation ............................................................................................................................11
Technical Support .........................................................................................................................................13
4
EasyIO FS20 – Installation Guide v1.0
Introduction
This document provides the installation guide/mounting guide for the EasyIO FS-20 controller.
- In an area where excessive moisture, corrosive fumes or explosion vapors are present.
- Where excessive vibration or shock is likely occur
- Location where excessive electrical noise such as large magnetic interference or variable speed
drive modules
Dimension
Below are the dimensions of the device.
5
EasyIO FS20 – Installation Guide v1.0
6
EasyIO FS20 – Installation Guide v1.0
Step 2
Use a screwdriver to unlock the 2 numbers of locking clips. Eventually you may use your finger.
7
EasyIO FS20 – Installation Guide v1.0
Step 3
Position the EasyIO FS-20 on the DIN rail mount till it hooks over the top edge of the DIN rail.
Push the controller towards the bottom part of the DIN rail
Step 4
Press/flatten the EasyIO FS-20 to make sure the bottom of the base cover touches the enclosure base
plate.
Step 5
Use a screwdriver to lock the locking clips to secure the EasyIO FS-20 to the DIN rail. Eventually you may
use your finger to press upwards and lock the clip to the DIN rail.
8
EasyIO FS20 – Installation Guide v1.0
Step 6
To keep the assembly secures a DIN rail end clip can be use.
The EasyIO FS-20 comes with 2 mounting holes as optional mounting. Occasionally if DIN rail mounting is
not practical, you can use screws to mount the EasyIO FS-20 to an enclosure base plate.
9
EasyIO FS20 – Installation Guide v1.0
Step 2
Hold both end of the top cover to lift up the top cover. Occasionally a small flat head screw driver might
come handy in case the top cover stuck to the bottom cover.
10
EasyIO FS20 – Installation Guide v1.0
Specifications Remark
Brand tested recommended Transend, Kingston
Capacity tested 2GB, 4GB, 8GB, 16GB
Class Class 4
Class 10
***Please note that the Micro SD card in the EasyIO FS Series is optional and the controller does not
complete with the SD Micro Card as standard. The SD Micro card can be purchased separately that
have the following specifications.***
Step 1
Locate the micro SD card slot at the bottom right corner.
The SD card holder is right above the ethernet port.
EasyIO FS Series comes with slide-in type of micro SD card holder.
11
EasyIO FS20 – Installation Guide v1.0
Step 2
Slide the micro SD card with contact pins face down.
Step 3
Carefully push the micro SD card in until it is lock.
A click sound indicates the micro SD card is locked in position.
12
EasyIO FS20 – Installation Guide v1.0
Step 4
To remove the micro SD card , push the micro SD card in towards the holder until you hear a click sound.
The micro SD card will eject.
Technical Support
13