Professional Documents
Culture Documents
2.1 Access CT Software Load Rev20150728
2.1 Access CT Software Load Rev20150728
Proprietary Notice:
This document and the information contained in it is proprietary and confidential information of Philips Healthcare
("Philips") and may not be reproduced, copied in whole or in part, adapted, modified, disclosed to others, or
disseminated without the prior written permission of the Philips Legal Department. Use of this document and the
information contained in it is strictly reserved for current Philips personnel and Philips customers who have a
current and valid license from Philips for use by the customer’s designated in-house service employee on
equipment located at the customer’s designated site. Use of this document by unauthorized persons is strictly
prohibited. Report violation of these requirements to the Philips Legal Department. This document must be
returned to Philips when the user is no longer licensed and in any event upon Philips’ first written request.
CSIP Level 1:
This document or digital media and the information contained in it is strictly reserved for current Philips
Healthcare (“Philips”) personnel, Philips licensed representatives and Philips customers who have purchased a
valid service agreement for use by the customer’s designated in-house service employee on equipment located at
the customer’s designated site. Use of this document or digital media by unauthorized persons is strictly
prohibited. This document or digital media must be returned to Philips when the user is no longer licensed and in
any event upon Philips’ first written request.
1
Objectives
When you have successfully completed this lab, you will be able to:
Use the backup and restore function
Partition a hard disk
Install software on the Console Computer
Load firmware software using the application software (Hardware Test program)
Load firmware using the firmware loading tools (Xilinx, AVR)
Prerequisite Lessons
Console Lecture
Rotor Control and Communication Lecture
Ghost Lecture
Tools/Reference Materials
Lab Bay Tool kits
Access CT Software Installation Manual
Access CT System Programming Installations Manual
Time
2 hours
Introduction
Software load lab assignment provide students hands on experience on complete software
installation on console computer.
Procedure Preview
In this lab exercise, the learner will learn how to,
Perform System Backup (backup can include: system calibrations, settings, protocols …
etc.)
Install system OS and scanner software (not only application will be installed also
backup recovery tool and other desktop items)
Restore System Backup and parameters
Verify System Operation and License Key
Configure RSN
Program boards firmware
© 2015 Koninklijke Philips N.V. All Rights Reserved.
CSIP Level 1: ATTENTION: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
2
Special Instructions/Precautions
<CAUTION:
You are required to read and understand the software installation instructions manual
before proceed with the software installation.>
<Warning:
Always perform a backup before reinstalling the software>
Instructions
1. Backup / Restore
a. Use Backup / Restore utility to make a backup of the system
Question:
How much space is needed for the backup?
What are the sizes of the partitions and what are they used for?
________________________________________________________________________
© 2015 Koninklijke Philips N.V. All Rights Reserved.
CSIP Level 1: ATTENTION: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
3
3. Loading Console Software
a. Load the software according to the Software Installation Manual
b. Restore system parameters using the backup
c. Verify the software and license key
5. Firmware loading using the service software (Xilinx, AVR) on FSE service laptop
a. Use the system software to load the firmware on a baseboard using
i. Xilinx
ii. AVR
—End of Lab—
4
Additional Information
<For further information about the topic, read/do….>
Revision History