Professional Documents
Culture Documents
Rocol Sapphire® Hi-Power Range 22
Rocol Sapphire® Hi-Power Range 22
Hydraulic, airline and compressor oils ISO VG 22, 32, 46, 68, 100
Hydraulic and compressor oils ISO VG 22, 32, 46, 68, 100
SAPPHIRE Hi-Power
Property Test Method
22 32 46 68 100
Kinematic Viscosity:
cSt @ 40°C IP 71 22 32 46 68 100
cSt @ 100°C IP 71 4.6 5.8 6.7 9.3 11.9
Viscosity Index ASTM D2270 127 125 104 112 110
Density (g/cm3) N/A 0.86 0.86 0.87 0.87 0.87
Pour Point (°C) ASTM D5950 -9 -9 -9 -9 -9
Flash Point (°C) COC ASTM D93 190 204 210 220 228
Copper Corrosion IP 112 - ASTM D130 1a 1a 1a 1a 1a
Rust Protection ASTM D665 Pass Pass Pass Pass Pass
Oxidation Test Hours DIN 51587 >3500 >3500 >3500 >3500 >3500
Values quoted above are typical and do not constitute a specification.
The information in this publication is based on our experience and reports from customers. There are many factors outside our control or
knowledge which affect the use and performance of our products, for which reason it is given without responsibility.
Issue: 1 Date: 01-11
SAFETY DATA SHEET
SAPPHIRE HI-POWER RANGE
Page: 1
Compilation date: 21/12/2011
Revision No: 3
1.2. Relevant identified uses of the substance or mixture and uses advised against
3.2. Mixtures
[cont...]
SAFETY DATA SHEET
SAPPHIRE HI-POWER RANGE
Page: 2
Hazardous ingredients:
4.2. Most important symptoms and effects, both acute and delayed
4.3. Indication of any immediate medical attention and special treatment needed
Extinguishing media: Use water spray to cool containers. Alcohol or polymer foam. Dry chemical powder.
Carbon dioxide.
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for
disposal by an appropriate method.
[cont...]
SAFETY DATA SHEET
SAPPHIRE HI-POWER RANGE
Page: 3
Handling requirements: Avoid direct contact with the substance. Avoid the formation or spread of mists in the air.
Storage conditions: Store in cool, well ventilated area. Keep away from direct sunlight.
Suitable packaging: Must only be kept in original packaging.
Hazardous ingredients:
State: Liquid
Colour: Blue
Odour: Barely perceptible odour
Evaporation rate: Negligible
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Insoluble
Viscosity: Non-viscous
Melting point/range°C: < -20 Flash point°C: > 150
Autoflammability°C: > 150 Relative density: 0.82
[cont...]
SAFETY DATA SHEET
SAPPHIRE HI-POWER RANGE
Page: 4
10.1. Reactivity
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Haz. decomp. products: In combustion emits toxic fumes of carbon dioxide / carbon monoxide.
12.1. Toxicity
[cont...]
SAFETY DATA SHEET
SAPPHIRE HI-POWER RANGE
Page: 5
Disposal of packaging: Dispose of in a regulated landfill site or other method for hazardous or toxic wastes.
NB: The user's attention is drawn to the possible existence of regional or national
regulations regarding disposal.
Transport class: This product does not require a classification for transport.
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture
by the supplier.
Other information
Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No
453/2010.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product.
[final page]