Professional Documents
Culture Documents
Baya Q1 W7 D2 D3 Performance Disassembly
Baya Q1 W7 D2 D3 Performance Disassembly
Name:
Grade and Section: Teacher:
LESSON In this module, you will disassemble a computer using safe lab
procedures and the proper tools. Use extreme care and follow all
Computer Disassembly safety procedures. Familiarize yourself with the tools you will be
using in this task.
NOTE:
If you have a camera or smartphone, take a picture of the inside of the computer case to be used as a
reference when reassembling the computer.
Put on an antistatic wrist strap. Connect one end of the conductor to the wrist strap. Clip the other end of
the conductor to an unpainted, metal part of the case.
If you have an antistatic mat, place it on the work surface and put the computer case on top of it. Ground
the antistatic mat to an unpainted, metal part of the case.
Questions:
What type of screwdriver did you use to remove the screws? How many screws secured the side panels?
______________________________________________________________________________________________________
______________________________________________________________________________________________________
Step 3 Remove the System Fan Unplug the fan from the motherboard. You can find the plug by following the
wire from the fan. It should be labeled "SYS_FAN1". Next, you will have to unscrew the fan from the outside.
You should now be able to lift the fan out of the PC.
Step 4 Remove the Central Processing Unit (CPU) Fan- The CPU fan is located right on top of the CPU heat
sink, which is a large piece of metal with fins on the top. The CPU fan plugs into the motherboard in an awkward
place, that is hard to access. But just follow the wires and you should easily find it. It is labeled "CPU FAN1". To
remove the fan from the heat sink, remove the four screws securing it in place.
Questions:
What side of the cover is system fan attached? What component is found under the CPU Fan?
______________________________________________________________________________________________________
______________________________________________________________________________________________________
1
Page
PASAY-S7CS1-Q1-W7-02-03
Name:
Grade and Section: Teacher:
Task 1
Directions: Prepare your checklist in Tools/Materials and Rubric. This will be use in Performance Task
Write it in an A4 bond paper.
Criteria 10 5 3
Accuracy 100% of the procedures 0% of the procedures are 49% and below of the
are correct. correct. procedures are correct
Workmanship 100% of the safety 50% of the safety 49% and below of the
(applied safety precaution is observed. precaution is observed. procedures are observed.
precautions)
Speed Finished on time 10-20 minutes late 30-40 minutes late
TOTAL
Highest Possible Score 30
Remove
Unplug all Remove Remove
Step 1 Step 2 Step 3 system Step 4
cables cover CPU Fan
fan
Remove
Remove Remove Remove the
Step Step Step Hard Step Remove Step
Power CD/DVD Mother
5 6 7 Drive 8 RAM 9
Supply Drive
board
After doing the Performance Task. What do you think is the importance of it? How this lesson helps
you as a Grade 7 student?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
Multiple Choice
Direction: Read the statement from column A and choose the BEST answer from the given choices in column
B
A B
5. Which cables needs to unplug from A. RAM, CPU and Hard Drive
the power supply unit before removing B. CPU, RAM and Motherboard
it from computer chassis? C. System Fan, CPU Fan, and Motherboard
D. Hard Drive, Motherboard, and CD/DVD Drive