FLOW-3D v12.0 Gets All Sedimental

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

25/10/2022 13:43 FLOW-3D v12.0 Gets All Sedimental | Engineering.

com

FLOW-3D v12.0 Gets All


Sedimental

Greater accuracy and usability comes to flagship CFD


program.

WRITTEN BY PUBLISHED READING TIME

Phillip Keane  Mar 21, 2019 ~3 mins

https://www.engineering.com/story/flow-3d-v120-gets-all-sedimental 1/5
25/10/2022 13:43 FLOW-3D v12.0 Gets All Sedimental | Engineering.com

Flow Science, Inc. announced a major release of its CFD software


FLOW-3D (v.12.0)
The new release features significant upgrades to the GUI, which
allows implified model setup and an enhanced user experience. In
addition, FLOW-3D v12.0 features a new Immersed Boundary
Method, and a sludge settling model.

Sludge simulator 2019. (Image courtesy of Flow Science.)

“FLOW-3D v12.0 includes new features and developments in both the


solver and the user interface. But without a doubt, the rejuvenation
of the user interface steals the show. The UI modernization couples a
new look with numerous optimizations under the hood for a much-
improved user experience,” said Amir Isfahani, CEO of Flow Science.
“With version 12.0, we are laying the groundwork for a sophisticated
user interface that will serve as the foundation for more application-
specific CFD products in the pipeline. Stay tuned for those.”
FLOW-3D v12.0’s Enhanced Features
So, in summary, the most significant enhancements in the latest
release are:
Immersed Boundary Method

https://www.engineering.com/story/flow-3d-v120-gets-all-sedimental 2/5
25/10/2022 13:43 FLOW-3D v12.0 Gets All Sedimental | Engineering.com

Accurate prediction of forces and energy losses is crucial to the


success of modeling many engineering problems involving flows
around solid bodies. The release of FLOW-3D v12.0 features a new
ghost-cell based Immersed Boundary Method (IBM) designed for
such problems. IBM provides a more accurate solution near walls for
internal and external flows, improving the calculation of drag and
lift forces.
Two-field temperature for the two-fluid model
The two-fluid heat transfer model has been extended to separate
energy transport equations for each fluid. Now, each fluid has its
own temperature variables, which improves the accuracy of the heat
and mass transfer solutions near the interface. Heat transfer at the
interface is now controlled by a user-defined heat transfer coefficient
that can be a tabular function of time.
Steady-state accelerator for free surface flows
The steady-state accelerator quickens the approach to a steady-state
solution. This is achieved by damping small-amplitude gravity and
capillary surface waves, and is applicable only to free surface flows.
You can find out more details on the FLOW-3D blog.
Sludge settling model
The new sludge settling model, a valuable addition for municipal
applications and people who like to watch sludge simulations (who
doesn’t?) enables users to model the solid waste dynamics in water
treatment tanks and clarifiers. Unlike the drift-flux model, where the
settling velocity is a function of the droplet size of the dispersed
phase, with this model the settling velocity is a function of sludge
concentration and can be input in both functional and tabular form.
Sediment scour model

https://www.engineering.com/story/flow-3d-v120-gets-all-sedimental 3/5
25/10/2022 13:43 FLOW-3D v12.0 Gets All Sedimental | Engineering.com

The sediment transport and erosion model has been overhauled to


enhance its accuracy and stability. In particular, the mass
conservation for sediment species has been greatly improved.
You can see the sludge settling model at work in the video below.
Sludge Settling Model | FLOW-3D HYDRO

If you’d like to know more about the latest release of FLOW-3D, then
you can read more about it over at the company's website.
Also, FLOW-3Dwill be showing a live webinar on April 4, 2019, to
demonstrate its new release. You can register for it at this link.

https://www.engineering.com/story/flow-3d-v120-gets-all-sedimental 4/5
25/10/2022 13:43 FLOW-3D v12.0 Gets All Sedimental | Engineering.com

WRITTEN BY SEE MORE LIKE THIS

Phillip Keane
 Follow Power Company CEO Promises to Bury the
Lines to Prevent Fires

Greater CAD Automation Comes to


Mentor’s FloMASTER

Can You Use Generative Design for Internal


Fluid Flow?

Ultrasonic 3D Printing Yields Smart Parts


for NASA

NUMERICAL INVESTIGATION OF SLIP


EFFECTS ON HYDROMAGNETIC
RELATED TOPICS
FLOW DUE TO A ROTATING POROUS
SOFTWARE 3D Design DISK IN A NANOFLUID WITH
INTERNAL HEAT ABSORPTION
Videos

https://www.engineering.com/story/flow-3d-v120-gets-all-sedimental 5/5

You might also like