Professional Documents
Culture Documents
SC550 User Manual
SC550 User Manual
Scanner Overview
2. Connection Guide
1. Plug the RJ45 connector of the USB cable to the 1. Plug the RJ45 connector of the RS-232 cable to
host interface on the omni directional barcode the host interface on the omni directional barcode
scanner. scanner.
2. Connect the other end of the USB cable to an 2. Connect the other end of the RS-232 cable to
available USB port on the Host device. the port on the serial port (DB9) on the Host device.
3. Connect the external power supply (5V DC 3. If the host does not have a power supply (on
adapter) to the USB cable. DB9), connect the external power supply (5V DC
adapter) to the RS-232 cable.
4. Switch on the host device. If properly connected,
the omni directional scanner will confirm with a 4. Switch on the host device. If properly connected,
buzzer sound and LED light. the omni directional scanner will confirm with a
buzzer sound and LED light.
3. Scanning Method 4. Reading Mode 5. Adjust the Volume 6. Problems and Solutions
No power