Professional Documents
Culture Documents
BX50 Series Forklift KOM101 00 EV2
BX50 Series Forklift KOM101 00 EV2
BX50 Series Forklift KOM101 00 EV2
FG25T-16
3
COMFORT & EFFICIENCY
TM
KOMFORT ZONE
Komatsu's Komfort ZoneTM Cares For Your Operators
At Komatsu Forklift, we know operator comfort is critical to reducing fatigue and increasing productivity. We take pride in
providing total operator comfort with the Komatsu Komfort ZoneTM: a dual floating structure that protects operators
through advanced ergonomic design. The Komfort ZoneTM reduces the effects of engine vibration, noise and heat.
4
BX50
® Full Instrumentation
Mast
The BX50 console keeps the operator informed with displays including:
®
With the excellent visibility window of the EZview mast, the • Neutral Indicator
BX50 operator has an unrestricted view of the fork tips and • Engine Oil Pressure Gauge
®
surroundings. Towards the front, the EZview mast, console • Low Battery/Alternator
and a low-profile dash display give maximum visibility. To the • Fuel Gauge
rear, the upper corners of the counterweight are angled for • Hour Meter
clear sightlines in reverse. • KOPS (Komatsu Operator Presence System) Plus
• Hydraulic Lock Indicator
• Check Engine Indicator
• Maintenance Error Code Display
• Engine Temperature Gauge
5
DURABILITY & RELIABILITY
EXPERTISE AND EXPERIENCE ARE BUILT IN
90+ Years Of Experience Brings You High Reliability
With the Komatsu BX50, we rely on our 90+ years of
experience to deliver exceptional performance and reliability.
You can trust Komatsu’s advanced engineering to deliver
long life in tough applications.
BX50 SERIES
6
BX50
7
ECOLOGY & ECONOMY
The BX50 Series helps create a workplace that’s easier to work and be productive
in. Sound levels are lower with the BX50 because the drive train generates high
operating torque at low engine speeds.
Engine emissions in gasoline and LPG engines are managed by our Engine
BX50 SERIES
Control Module (ECM) that produces exceptionally low emission levels because
it more accurately regulates air-fuel ratios for optimum combustion. The result is
the BX50 exceeds Tier II regulations for gasoline and LPG engine
exhaust emissions set by the U.S. Environmental
Protection Agency (EPA).
TM
Fuel Economy Built In With EZLift Hydraulics Komatsu's Telematics Lite NEW
Komatsu's New Telematics Lite option for the BX50
Excellent fuel economy is achieved through a combination
includes the following features & benefits:
of electronic engine control technologies and an efficient
optimized fuel injection system. These advanced • GPS tracking
technologies boost fuel economy with our LPG or flexible • Remote hour meter readings
• Maintenance reminders
dual fuel (LPG/Gasoline) systems.
• Online dashboard for fleet tracking and
The BX50’s fuel economy is further boosted by the EZliftTM usage reports in real time
hydraulic system, which uses a tandem pump to supply • Vital real-time information allows for
timely fleet management
independent power for lifting and steering. The tandem pump
• Performing PM maintenance only when
eliminates the flow divider between the pump and control needed saves time and money
valve. EZliftTM hydraulics give you smooth lifting without
revving up the engine, which reduces fuel consumption. Telematics Lite helps
It also keeps the engine from stalling when steering and make your forklift
lifting, produces less temperature buildup and delivers better smarter and your rental
control in tight areas. fleet more efficient,
giving you basic
telematics at an
affordable price.
8
BX50
The BX50’s superior performance can increase productivity, minimize operator fatigue, reduce operating costs and improve the
working environment. Boost your bottom line now and put a BX50 to work in your application today.
9
TECHNICAL DATA
ENGINE – LPG / DUAL FUEL EZLIFT™ HYDRAULIC SYSTEM MAST, CARRIAGE, LOAD BACKREST AND FORKS
• GK21 (2.1 liter) or GK25 (2.5 liter) LPG/Dual Fuel, • The fully filtered EZliftTM Hydraulic System features a • High visibility EZview® mast assemblies are available in
4-cylinder, electronically controlled industrial engines powerful and efficient direct drive tandem gear pump two-stage limited free lift; two-stage, three-stage and
exceed EPA emissions standards. These low-RPM, high assembly with separate pumps for load handling and four-stage full free lift designs
torque engines offer reduced maintenance requirements, steering, enabling faster lifting at engine idle speed for • Sealed mast bearings reduce required maintenance
exceptional emissions controls, fast acceleration, greater fuel economy and better hydraulic performance • Angle-mounted bearings and a shaped rail flange
high performance, reliability, durability and enhanced • Large hydraulic fluid reservoir integral to the truck frame prevent excessive wear and friction, while maintaining
serviceability through engineering excellence. reduces heat buildup in the system correct side thrust clearance
• All engines are equipped with 3-way catalytic converters • The independent steering pump assures no power • ITA Class II or Class III 6-roller carriages accept a variety
BX50 SERIES
and closed-loop exhaust systems steering loss even when performing other hydraulic of fork sizes and common load-handling attachments
• All engines utilize an electronic control module that functions • 48 inch high load backrest is standard for increased
continuously monitors data on fuel pressure, accelerator • Load sensing valve in the hydraulic circuit reduces the load control and operator protection
throttle position, mass airflow sensor, and heated oxygen flow of oil to the power steering system when steering • Internal hose reeving is available for 3-way and 4-way
sensor – for improved fuel economy, smooth operation, wheel is idle auxiliary hydraulic functions
reliable starting in cold weather and high performance • 3-way control valve is standard with 4-way control valve
throughout the operating range optional KOMFORT ZONE™ OPERATOR COMPARTMENT
• An electronic throttle governor protects the engine against • A unique dual floating structure floats the drive train and
over-rev damage FRAME operator compartment on rubber cushions to greatly
• Crankshaft and camshaft position sensors provide • An all-welded frame assembly with heavy gauge steel reduce vibration that can be transmitted through the
information to the electronic control module for optimum and integral hydraulic and fuel tanks provide exceptional frame and to the operator compartment
ignition and fuel injection timing durability • The full floating Komfort ZoneTM operator compartment
• Each cylinder has an individual ignition coil for precise • Welded front cross-member and bolted drive axle isolates the operator from the floor surface and from
control and reliability increases frame rigidity engine vibrations for greater comfort and increased
• An engine coolant temperature sensor and controller • Loads are transferred directly from the mast to the drive productivity
protects the engine against damage due to high engine axle and onto the floor without being transmitted through • Full suspension Komfort “S” vinyl seat with orange
temperature by automatically limiting engine speed the frame, reducing frame stress retractable seat belt, operator restraint system, backrest,
during high temperature operation. If the engine coolant • Wide, open step area, with non-slip surface facilitates operator weight and front to back adjustability (All models
temperature exceeds safe operation temperature, the easy operator entry and exit to and from the operator except FG20ST)
engine will shut down. An illuminated indicator on the compartment • Hydraulic control levers are positioned for optimal access
instrument console indicates high-temperature operation, and ease of use. International symbols on the contoured
DRIVE AXLE grips indicate the lever function.
and gives the operator warning of engine shutdown.
• A heavy duty, cast steel drive axle housing supports • Tilt steering column has a small-diameter steering wheel
• Aluminum alloy cylinder heads have large intake and
the load and chassis without placing a load on the and electronic instrumentation. Tilt is infinitely adjustable,
exhaust valves and a semi-hemispherical combustion
free-floating axle shafts with extended room between the engine cover and
chamber for more efficient fuel consumption
• A flange is mounted to the truck frame to improve load console for more operator space.
• The engine block is designed with five main bearings.
distribution and reduce frame flexing • Wide-open floorboard has suspended brake and inching
All main and rod bearings are micro-grooved to improve
lubrication and reduce wear. pedals with ribbed rubber pads for comfort and safety.
TRANSMISSION
Integral accelerator mechanism has a transfer roller for
• Komatsu Torqflow single-speed, powershift automatic
FUEL SYSTEM smooth operation
transmission is specifically designed for industrial
• LPG fuel system is standard and uses single-point, • Full width rubber floor mat provides a large, non-slip
applications
throttle body fuel injection. A removable 33 lb. or 43 lb. surface and reduces noise, vibration and heat in the
• An electrical shift lever mounted to the left side of the
LPG fuel tank is available with stationary, fold-back or compartment
steering column gives the operator easy directional control
swing-out-and-down tank brackets. • Large, open steps with a traction surface and a large
without removing a hand from the steering wheel
• The optional Dual-Fuel system†, has a fuel tank integral to handgrip provide easy entry and exit for the operator
• Optimized stall ratio for the torque converter provides high
the truck frame, an in-tank mounted gasoline fuel delivery • Standard headlight/turn indicator control lever is mounted
torque without sacrificing travel speed
pump, fuel level sensing unit, pressure regulator and filter on the steering column for easy access
• A modulating control valve absorbs initial pressure spikes
with easy change-over at the flip of a switch • Full width overhead guard provides excellent visibility for
during initial engagement and directional changes. This
high stacking and meets ITSDF B56.1 requirements
COOLING SYSTEM improves shifting capabilities and prolongs the life of the
• The high capacity aluminum radiator is designed with an entire drive train. SERVICEABILITY
efficient thermal transfer fin and integral oil cooler for the • Transmission oil is double filtered by a 125-micron mesh on • The engine and transmission can be easily accessed for
transmission torque converter pickup and a 35-micron cartridge in the return line daily inspection without the use of any tools
• System design allows easy access to the reservoir for • Transmission oil cooler is integral with the radiator • Single piece, all steel engine cover and seat support is
checking the coolant level • Inching control and brake pedal combination allows the fully insulated to reduce noise and heat transfer to the
• High volume cooling fan uses flexible plastic blades and operator precise truck positioning with positive control Komfort ZoneTM
shroud for maximum air volume and noise reduction • Engine cover has a gas spring with an automatic locking
BRAKES
device to assist in opening and preventing the cover from
ELECTRICAL SYSTEM • Hydraulic brakes are self-energizing and self-adjusting
unexpectedly closing
• 12-volt electrical system • Brake fluid reservoir is located under the console cover for
• Easy access engine cover latch is recessed to prevent
• 50A alternator with built-in IC regulator fast, easy inspection and maintenance
interference when entering and exiting the operator
• Key-lock, anti-restart ignition switch • Heavy duty brake backing plate and thick brake drum
compartment
• High-torque, low-amp starter motor with planetary gear provide reliable braking action with reduced heat
• Engine cover is contoured for easy access into the engine
reduction • Mechanical parking brake has a two-stage latching
compartment for maintenance and service
• Waterproof electrical connector mechanism for positive engagement
• Service Support Tool connector for rapid system COMPLIANCE, APPROVALS AND ENVIRONMENTAL
STEER AXLE
diagnostics CONCERNS
• Fully Hydrostatic Power Steering is standard
• Standard instrument package and operator conveniences • Designed for maximum recycling at end of life, with
• Independent power steering pump separates steering
include: special attention to materials and construction.
function from main hydraulics for smoother, more reliable
• Electric fuel gauge, water temperature gauge and Counterweight designed for breakup during recycling
action
LCD hour meter process. Transmission case is recyclable aluminum.
• Heavy duty fabricated steer axle has double acting,
• Indicator lights for Neutral/Return to Neutral, • Komatsu forklifts meet or exceed American National
double ended power steering cylinder with no drag links
Low Oil Pressure, Low Battery/Alternator Output, Standard Institute, ITSDF B56.1-Part III Safety Standards
or tie rods
Check Engine Warning, Hydraulic Lock (Operator for Powered Industrial Trucks
• Steering stops are machined into the steering cylinder to
Presence), and engine status codes • Classified by Underwriters Laboratories, Inc. for fire
reduce stress impact on steering linkages
hazard only. Contact your dealer for application-specific
• Grease fittings on all linkages are accessible without lifting
requirements.
the truck
• Meets EPA emissions standards Tier II
†
Available on Pneumatic models only
10
BX50
EQUIPMENT
STANDARD EQUIPMENT
• Low profile dash display: Fuel Gauge, • Large, Open Floor Space with PNEUMATIC
Water Temperature Gauge and Hour Operator Compartment Suspended- • Stationary LP Tank Bracket
Meter Mount Pedals • "Komfort S" Full Suspension Seat - Vinyl
• Indicator lights: Neutral/Return to • Transmission Torque Converter Oil with Orange Seat Belt
Neutral, Low Oil Pressure, Low Battery/ Cooler
Alternator, Hydraulic Lock (Operator • Load Backrest • TIRES:
Presence), Check Engine Warning and • Spacious Step Area, Large Entry • Single Drive, Pneumatic
Maintenance Error Code Handgrip and Wide Open Floor Space • Steer, Pneumatic
• Drawbar Pin in Counterweight allows easy entry/exit to the Komfort
• Electronic Ignition, Anti-Restart Ignition Zone CUSHION
Switch • Engine Protection System • Fold Down LP Tank Bracket
• Fully Hydrostatic Power Steering • ITA Class II or Class III Fork Carriage • "Komfort S" Full Suspension Seat - Vinyl
• LED Tail/Stop/Rear Turn Lights • ITA Class II or Class III Forks with Orange Seat Belt
• High-Mount Air Intake • Critical Wiring Harness Connectors are • Komfort Seat & Operator Restraint
• Horn with Actuator on Center of Waterproof System with Lap Belt (Standard only on
Steering Wheel • Contoured, Easy to Grip, Hydraulic FG20ST-16)
• Three Piece Overhead Guard Control Lever Knobs • TIRES:
• Three Function Hydraulic Control Valve • Overhead Guard Mounted Headlights • Drive, Lug Cushion
• Parking Brake with Double-Action • Steer, Lug Cushion
Release
• Tilting Steering Column
OPTIONAL EQUIPMENT
• Warning Lights & Audible Travel FORKS:
Alarms • 36 in. (915 mm) MODELS
• Tilt Cylinder Boots • 42 in. (1,070 mm)
• Cotton-Core Radiator • 48 in. (1,220 mm) BX50 Series
• Spinner Knob Steering Wheel • 54 in. (1,370 mm)
• Dual-Fuel System (Pneumatic Only) • 60 in. (1,520 mm) LPG/Dual Fuel Engine Forklift Availability
• Sideshifter - Integral or Hang-On LPG =
• 72 in. (1,820 mm)
Dual Fuel =
• 4-Way Valve and Internal Hosing
• Seats Capacity, lbs. 4,000 5,000 6,000 6,500
• Tires Cushion Tire
• Masts: 2-Stage, 3-Stage & 4-Stage Pneumatic Tire
• Fire Extinguisher
• Attachments
• Rear Assist Grip with Horn Button
• Steel Cab (Pneumatic Only)
11
BX50 CUSHION SPECIFICATIONS
SPECIFICATIONS
2.2 Front lb (kg) 9,820 (4,455) 11,330 (5,140) 11,330 (5,140) 13,260 (6,015) 14,000 (6,350)
Weight
Loaded
2.2.1 Rear lb (kg) 1,480 (670) 1,850 (840) 1,850 (840) 2,180 (990) 2,430 (1,100)
Axle Loading
2.3 Front lb (kg) 2,820 (1,280) 2,600 (1,180) 2,600 (1,180) 2,870 (1,300) 2,740 (1,245)
Unloaded
2.3.1 Rear lb (kg) 4,480 (2,030) 5,580 (2,530) 5,580 (2,530) 6,570 (2,980) 7,180 (3,255)
3.1 Tire Type Cushion Cushion Cushion Cushion Cushion
3.2 Front 21 x 7 x 15 21 x 7 x 15 21 x 7 x 15 21 x 8 x 15 21 x 8 x 15
Tire Size
3.3 Rear 16.25 x 5 x 11.25 16.25 x 5 x 11.25 16.25 x 5 x 11.25 16.25 x 6 x 11.25 16.25 x 6 x 11.25
Tires
3.5 Number of Wheel Front/Rear (x=driven) 2x/2 2x/2 2x/2 2x/2 2x/2
3.6 Tread, Front b10 in. (mm) 34.6 (879) 34.6 (879) 34.6 (879) 35.2 (895) 35.2 (895)
3.7 Tread, Rear b11 in. (mm) 35.4 (900) 35.4 (900) 35.4 (900) 34.8 (885) 34.8 (885)
4.1 Tilting Angle - 2 stage masts a / b Forward/Backward degree 6/8 6/8 6/8 6/8 6/8
4.1.1 Tilting Angle - 3 stage masts a / b Forward/Backward degree 6/5 6/5 6/5 6/5 6/5
4.2 Mast Height, Lowered h1 2-stage Mast in. (mm) 85.5 (2,170) 85.5 (2,170) 85.5 (2,170) 85.5 (2,170) 88.5 (2,250)
4.3 Std. Free Lift Height h2 2-stage Std. Mast, from Ground in. (mm) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140)
4.5 Mast Height, Extended† h4 2-stage Std. Mast in. (mm) 176 (4,470) 176 (4,470) 176 (4,470) 176 (4,470) 176 (4,470)
4.6 Max Fork Height** h5 2-stage Std. Mast in. (mm) 128 (3,250) 128 (3,250) 128 (3,250) 128 (3,250) 128 (3,250)
4.7 Height, Overhead Guard h6 in. (mm) 80.9 (2,055) 80.9 (2,055) 80.9 (2,055) 80.9 (2,055) 80.9 (2,055)
Dimensions
4.19 Length, with Std. Forks L1 in. (mm) 132.9 (3,375) 135.4 (3,440) 135.4 (3,440) 137.8 (3,500) 139.2 (3,535)
4.20 Length, to Fork Face L2 in. (mm) 90.7 (2,305) 93.3 (2,370) 93.3 (2,370) 95.7 (2,430) 97 (2,465)
4.21 Width, at Tire b1 Single in. (mm) 42.1 (1,070) 42.1 (1,070) 42.1 (1,070) 43.3 (1,100) 43.3 (1,100)
1.6 x 4 x 42 1.6 x 4 x 42 1.6 x 4 x 42 2 x 5 x 42 2 x 6 x 42
4.22 Forks s/e/l Thickness x Width x Length in. (mm)
(40 x 100 x 1,070) (40 x 100 x 1,070) (40 x 100 x 1,070) (50 x 125 x 1,070) (50 x 125 x 1,070)
4.24 Carriage Width / ITA Class b3 in. (mm) 37 (940) / II 37 (940) / II 37 (940) / II 37 (940) / III 37 (940) / III
4.31 m1 Under Mast in. (mm) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140)
Ground Clearance
4.32 m2 at Center of Wheelbase in. (mm) 3.9 (100) 3.9 (100) 3.9 (100) 3.9 (100) 3.9 (100)
4.33 Aisle Width †† Ast 2-stage mast in. (mm) 92.5 (2,350) 94.5 (2,400) 94.5 (2,400) 98.8 (2,510) 100 (2,540)
4.35 Turning Radius Wa outside in. (mm) 75.6 (1,920) 77.6 (1,970) 77.6 (1,970) 81.5 (2,070) 82.7 (2,100)
Loaded mph (km/h) 10.6 (17) 10.6 (17) 10.6 (17) 10.6 (17) 10.6 (17)
5.1 Travel Speed (FWD)
Unloaded mph (km/h) 10.6 (17) 10.6 (17) 10.6 (17) 10.6 (17) 10.6 (17)
Loaded fpm (mm/s) 120 (610) 120 (610) 120 (610) 104.3 (530) 104.3 (530)
5.2 Lifting Speed
Unloaded fpm (mm/s) 124 (630) 124 (630) 124 (630) 124 (630) 108 (550)
Performance
7.2 Rated Output, SAE Gross HP (kW) 54 (40) 54 (40) 60 (44) 60 (44) 60 (44)
7.3 Rated RPM min-1 2,700 2,700 2,700 2,700 2,700
7.3.1 Max. Torque, SAE net lb-ft (Nm) @ rpm 111 (151) @ 2,000 111 (151) @ 2,000 136 (185) @ 2,000 136 (185) @ 2,000 136 (185) @ 2,000
7.4 No. of Cylinder/Displacement Cu. In. (cm3) 4/126 (2,065) 4/126 (2,065) 4/152 (2,488) 4/152 (2,488) 4/152 (2,488)
8.2 Relief Pressure for Attachment PSI (Bar) 2,630 (181) 2,630 (181) 2,630 (181) 2,630 (181) 2,630 (181)
Others
NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those shown. The performance of
machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area. If these specifications are critical or if your needs exceed the
specifications shown here, discuss the proposed application with your authorized dealer.
*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.
†Includes 48-inch (1,220 mm) high load backrest. Contact your authorized dealer.
††Add load distance and clearance. Contact your authorized dealer.
12
BX50
• EPA compliant GK21 and GK25 industrial engines with high torque at low RPMs for EZview® FG32SHT
power and fuel efficiency 2-STAGE FREE VIEW (FV)
• Komfort ZoneTM dual floating structure uses drive train cushion mounts and 82 (2,080) 65.5 (1,665) 130 (3,300) 5.5 (140)
suspension compartment mounts to isolate the operator from engine and floor vibration 106 (2,690) 77.5 (1,970) 154 (3,910) 5.5 (140)
• EZlift™ Hydraulic System with tandem pump provides fast and controllable lifting 114 (2,895) 81.5 (2,070) 162 (4,115) 5.5 (140)
speed at low engine RPM 128 (3,250) 88.5 (2,250) 176 (4,470) 5.5 (140)
• A full floating transmission with high capacity oil cooler for the torque converter, 130 (3,300) 89.5 (2,275) 178 (4,520) 5.5 (140)
aluminum alloy transmission case for better heat dissipation, and highly reliable, 146 (3,705) 97.5 (2,475) 194 (4,925) 5.5 (140)
dust resistant, double sealed universal joint design increases performance and reliability 158 (4,010) 103.5 (2,630) 206 (5,230) 5.5 (140)
• Self-adjusting brakes with thicker drums improve heat resistance in severe duty 3-STAGE FULL FREE VIEW (TFV)
applications 150.5 (3,820) 76.5 (1,945) 198.5 (5,040) 28.5 (725)
• Improved steer axle with integral double acting, double ended cylinder, high capacity 162.5 (4,125) 80.5 (2,045) 210.5 (5,345) 32.5 (825)
kingpin needle bearings, and heavy-duty seals increases durability 183.5 (4,660) 87.5 (2,220) 231.5 (5,880) 39.5 (1,005)
• EZview® mast with improved visibility window, combined with low profile dash display, 189.5 (4,810) 91.5 (2,325) 237.5 (6,030) 43.5 (1,105)
offers the operator an unrestricted view to the fork tips and surrounding area 210.5 (5,345) 100.5 (2,550) 258.5 (6,565) 52.5 (1,335)
217.5 (5,525) 103.5 (2,630) 265.5 (6,740) 55.5 (1,410)
• KOPS (Komatsu Operator Presence System) Plus locks out lift, lower, tilt and travel
230.5 (5,855) 110.5 (2,805) 278.5 (7,070) 62.5 (1,585)
functions when the operator leaves the seat for longer than three seconds
NOTE: Specifications for 4-Stage Full Free View (QFV) Masts are not indicated.
Please consult your authorized dealer for information and availability.
13
BX50 PNEUMATIC SPECIFICATIONS
SPECIFICATIONS
2.2 Front lb (kg) 9,880 (4,480) 11,360 (5,155) 11,360 (5,155) 13,510 (6,130) 14,200 (6,440)
Weight
Loaded
2.2.1 Rear lb (kg) 1,300 (590) 1,590 (720) 1,590 (720) 1,910 (865) 2,110 (955)
Axle Loading
2.3 Front lb (kg) 3,270 (1,485) 3,110 (1,410) 3,110 (1,410) 3,600 (1,635) 3,480 (1,580)
Unloaded
2.3.1 Rear lb (kg) 3,900 (1,770) 4,840 (2,195) 4,840 (2,195) 5,810 (2,635) 6,320 (2,865)
3.1 Tire Type Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
3.2 Front 7.00 - 12 - 12PR (I) 7.00 - 12 - 12PR (I) 7.00 - 12 - 12PR (I) 28 x 9 - 15 - 12PR (I) 28 x 9 - 15 - 12PR (I)
Tire Size
3.3 Rear 6.00 - 9 - 10PR (I) 6.00 - 9 - 10PR (I) 6.00 - 9 - 10PR (I) 6.50 - 10 - 10PR (I) 6.50 - 10 - 12PR (I)
Tires
3.5 Number of Wheel Front/Rear (x=driven) 2x/2 2x/2 2x/2 2x/2 2x/2
3.6 Tread, Front b10 in. (mm) 38 (965) 38 (965) 38 (965) 40.4 (1,025) 40.4 (1,025)
3.7 Tread, Rear b11 in. (mm) 37.8 (960) 37.8 (960) 37.8 (960) 38 (965) 38 (965)
4.1 Tilting Angle - 2 stage masts a / b Forward/Backward degree 6/12 6/12 6/12 6/12 6/12
4.1.1 Tilting Angle - 3 stage masts a / b Forward/Backward degree 6/5 6/5 6/5 6/5 6/5
4.2 Mast Height, Lowered h1 2-stage Mast in. (mm) 85.5 (2,170) 85.5 (2,170) 85.5 (2,170) 85.5 (2,160) 88.5 (2,250)
4.3 Std. Free Lift Height h2 2-stage Std. Mast, from Ground in. (mm) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140)
4.5 Mast Height, Extended† h4 2-stage Std. Mast in. (mm) 176 (4,470) 176 (4,470) 176 (4,470) 176 (4,470) 176 (4,470)
4.6 Max Fork Height** h5 2-stage Std. Mast in. (mm) 128 (3,250) 128 (3,250) 128 (3,250) 128 (3,250) 128 (3,250)
4.7 Height, Overhead Guard h6 in. (mm) 83.1 (2,110) 83.1 (2,110) 83.1 (2,110) 83.9 (2,130) 83.9 (2,130)
Dimensions
4.19 Length, with Std. Forks L1 in. (mm) 141.5 (3,595) 144.5 (3,670) 144.5 (3,670) 148.8 (3,780) 150.6 (3,825)
4.20 Length, to Fork Face L2 in. (mm) 99.4 (2,525) 102.4 (2,600) 102.4 (2,600) 106.7 (2,710) 108.5 (2,755)
4.21 Width, at Tire b1 Single in. (mm) 45.3 (1,150) 45.3 (1,150) 45.3 (1,150) 48.6 (1,235) 48.6 (1,235)
1.6 x 4 x 42 1.6 x 4 x 42 1.6 x 4 x 42 2 x 5 x 42 2 x 5 x 42
4.22 Forks s/e/l Thickness x Width x Length in. (mm)
(40 x 100 x 1,070) (40 x 100 x 1,070) (40 x 100 x 1,070) (50 x 125 x 1,070) (50 x 125 x 1,070)
4.24 Carriage Width / ITA Class b3 in. (mm) 41 (1,040) / II 41 (1,040) / II 41 (1,040) / II 41 (1,041) / III 41 (1,041) / III
4.31 m1 Under Mast in. (mm) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140) 5.5 (140)
Ground Clearance
4.32 m2 at Center of Wheelbase in. (mm) 6.3 (160) 6.3 (160) 6.3 (160) 7.5 (190) 7.5 (190)
4.33 Aisle Width †† Ast 2-stage mast in. (mm) 104.1 (2,645) 106.1 (2,695) 106.1 (2,695) 112.4 (2,855) 114.4 (2,905)
4.35 Turning Radius Wa outside in. (mm) 86.2 (2,190) 88.2 (2,240) 88.2 (2,240) 93.3 (2,370) 95.3 (2,420)
Loaded mph (km/h) 11.2 (18) 11.2 (18) 11.2 (18) 11.5 (18.5) 10.9 (17.5)
5.1 Travel Speed (FWD)
Unloaded mph (km/h) 11.8 (19) 11.8 (19) 11.8 (19) 12.1 (19.5) 11.5 (18.5)
Loaded fpm (mm/s) 120 (610) 120 (610) 120 (610) 104 (530) 104 (530)
5.2 Lifting Speed
Unloaded fpm (mm/s) 124 (630) 124 (630) 124 (630) 124 (630) 124 (630)
Performance
NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those shown. The performance of
machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area. If these specifications are critical or if your needs exceed the
specifications shown here, discuss the proposed application with your authorized dealer.
*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.
†Includes 48-inch (1,220 mm) high load backrest. Contact your authorized dealer.
††Add load distance and clearance. Contact your authorized dealer.
14
BX50
NOTE: Specifications for 4-Stage Full Free View (QFV) Masts are not indicated.
Please consult your authorized dealer for information and availability.
15
We're Close By
Komatsu Forklift U.S.A. has a dealer network covering all regions of the
United States and Canada. So, it doesn't matter where you are located,
BX50 SERIES
a Komatsu Forklift U.S.A. dealer will be there ready to provide the quality
service and solutions you need.
KOM101-00 ©2018 Komatsu America Corp. Printed in USA AD11(2M)OTP 08/20 (EV-2)